Home Vision X601 Advanced 4D Full Motion TV Wall Mount Installation Guide

Home Vision X601 Advanced 4D Full Motion TV Wall Mount Installation Guide

Before Installation

1. Check the wall
   Drywall with wood studs

Solid concrete or concrete block

CAUTION: DO NOT install into pure drywall alone

2. Check your TV VESA pattern (VESA=Horizontal x Vertical) Check the four holes at the back of your TV
   
   Please check the ports on the back of the TV to avoid potential clogging
   

3. Please prepare these tools required for the installation
   Tape Measure

Pencil

Awl

Screw Driver

Electric Drill

Socket Wrench

Wood Stud Install
Stud Finder

Wood Drill Bit

Concrete Install
Masonry Drill Bit”

Hammer

Package Included

WARNING: Before assembling please confirm whether all accessories are packaged completely.
Do not swallow any accessories. Small accessories may cause choking hazard if swallowed.

Main parts

1. Velcro x3

2. Level x1

3. TV Bracket on the Left x1
   

4. TV Bracket on the Right x1
   

5. Wall Panel x1

6. Mounting Template x1

For wall drilling

• A Tapping Screw (5/16*2.75″)×4

• B Anchor (10*60) × 4

• C M8 Washer (4228.52.0) x 4

For TV bracket installing

• D M4*15 x4

• E M4*30 x4

• F M6*15 x4

• G M6*30 x4

• H M8*15 x4

• I M8*45 x4

• J M4/M5 Washer (¢166.01.0) x4

• K M6/M8 Washer (4208.51.5) x4

• L 10mm Spacer Ring (4188.510.0) x8

• M 5mm Spacer Ring (4188.55.0) x8

• N Wrench x1

• O Allen Key x1

Installation Steps

Select the right screws/washers/spacer rings according to the size and depth of the TV screw holes.

Install the TV panel

Combination of screws and washers

Combination of screws, washers and spacer rings

1. Install the bracket
   

Install the wall panel

1. Wood studs
   
   

2. Concrete/brick wall
   
   

Hang the TV

1. Verify the firmness of the wall panel.
   

2. Hang the TV
   

Adjust the angle of your TV freely according to your preference

1. Slide and telescope parallel left and right.Swivel 8°±2° smoothly.
   Tilt up +5° & tilt down -10°.
   

2. Horizontal ±4°adjustable. Advanced hover damper ensures your TV stay at the angle you need steadily
   
   Tips: When removing the TV, pull down the left and right drawstrings at the same time to avoid damaging the lock.

To facilitate your installation, please refer to this installation guide.
Thank you for choosing HOME VISION! This product comes with 10 years warranty. For any questions during installation and use, please contact us first. We are 7*24 hours available to ensure that your problems will be 100% well-solved.
Email: [email protected]
https://en.homevisional.com

References

• Home Vision_Telescopic bracket_Desktop stand

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>