FLALINKO F221102 Dusk to Dawn Outdoor Wall Sconce Instruction Manual

FLALINKO F221102 Dusk to Dawn Outdoor Wall Sconce

Installation Instructions

MODEL: F221102, F221103

IMPORTANT SAFETY INSTRUCTIONS

• Warning: If any special control devices are used with this fixture, follow the instructions carefully to ensure full compliance with N.E.C. requirements. If there are any questions, contact a qualified electric contractor.
• Warning: This product can expose you to chemicals including lead, which is known to the State of California, to cause cancer birth defects, or other reproductive harm. For more information, please go to www.P65Warnings.ca.gov
• Caution: Electrician installation is highly recommended. All glass is fragile, use care when handling glass component(s) and or lamp(s). Read the instructions carefully and turn the electricity off at the main circuit breaker panel before beginning the installation

Important Notice

• This is a generic instruction sheet used for various fixtures.
• The shape and style of fixture/glass/shade/diffuser may vary

(Required Supply Circuit: 120V, 60Hz. Bulb Type: 1E26100W Max)

Compatible Bulb Type
(NOT Included)

COMPONENTS INCLUDED IN THE PACKAG

ASSEMBLY & INSTALLATION STEPS

1. Open the box from top, and take out all the components, parts bag, and manual from the box carefully.
2. Check all the components against the parts list. Make sure to get each part on the list. If any parts missing or glass is damaged, please contact the manufacturer at: support@flalinko.com to get a replacement.
   Parts are NOT included which is shown as 0 under QTY.

PARTS LIST         (Parts QTY X 2 for 2PK)

Part Name| QTY| Code| | Part Name| QTY| Code
Junction Box| 0| A| Wire Nut| 3| I
Leading Wires| 2| B| Fixture Wire| 2| J
Universal Mounting Bracket| 1| C| Socket| 1| K
(1.25″)Mounting Screw| 2| D| Fixture Frame| 1| L
Studs| 2| E| Glass| 4| M
Back Plate| 1| F| Glass Clip| 8| N
Washer| 2| G| Bulb| 0| O
Cap Nut| 2| H| | |

1. Refer to the illustration while doing assembly and follow the steps below:
   • Screw the bulb (O) onto socket (K) before installation.
   • Thread two studs (E) onto the mounting bracket (C) at the proper position. Then attach the mounting bracket (C) to the junction box (A) by two mounting screws (D). Adjust the mounting bracket to a horizontal level.
   • Connect wires according to the wiring diagram as below.
   • Attach the backplate (F) to two studs (E) and fix with two washers (G) and cap nuts (H).
   • In case of glass damage, unlock the glass clips (N) on the bottom of the fixture frame (L) to release the damaged glass, then carefully replace with a new glass and clip the glass clips (N) again to fix the glass (M).

Missing parts? Glass damage? Any questions?

Please email us at: support@flalinko.com
We are always here to help you fix the problems you are facing.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>