PROAIM CMH-01 SnapRig Monitor Holder with Cold Shoe Mount User Guide

PROAIM CMH-01 SnapRig Monitor Holder with Cold Shoe Mount

Product Information

Specifications

• Product Name : SnapRig Monitor Holder with Cold Shoe Mount CMH-01
• Model Number : CMH-01
• Material : High-quality durable plastic
• Color : Black
• Weight : 150 grams

Product Usage Instructions

Step 1: Unboxing
Start by inspecting the contents of the package to ensure you have received everything listed below:

• Monitor Holder with Cold Shoe Mount

Step 2: Assembly
To assemble the SnapRig Monitor Holder, follow these steps:

1. Take the Monitor Holder out of the package.
2. Locate the cold shoe mount on the holder.
3. Align the cold shoe mount with the corresponding slot on your camera or accessory.
4. Gently slide the holder onto the cold shoe mount until it clicks into place.
5. Ensure that the holder is securely attached to the cold shoe mount.

Step 3: Mounting a Monitor
Follow these instructions to mount a monitor onto the SnapRig Monitor Holder:

1. Loosen the adjustable screw on the holder to create space for your monitor.
2. Place the monitor onto the holder, ensuring that the mounting holes align with the screws on the holder.
3. Tighten the adjustable screw to secure the monitor in place.

Step 4: Adjusting the Monitor
You can adjust the angle and position of the monitor using the following steps:

1. Loosen the adjustment knobs located on the sides of the holder.
2. Rotate or tilt the monitor to your desired position.
3. Tighten the adjustment knobs to lock the monitor in place.

Step 5: Removing the Monitor
If you need to remove the monitor from the holder, follow these steps:

1. Loosen the adjustable screw to create space for removing the monitor.
2. Slide the monitor out of the holder.

FAQ (Frequently Asked Questions)

Can I use this holder with any type of monitor?
The SnapRig Monitor Holder is compatible with most standard monitors that have mounting holes and are within the weight limit of 150 grams.

Is it possible to mount other accessories instead of a monitor?
Yes, as long as the accessory has a cold shoe mount and is within the weight limit, it can be mounted onto the SnapRig Monitor Holder.

How do I clean the holder?
Use a soft cloth or sponge dampened with mild soap and water to gently wipe the surface of the holder. Avoid using harsh chemicals or abrasive materials that may damage the plastic.

What’s In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed below.

Monitor Holder with Cold Shoe Mount

All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permitted by the applicable copyright statutes or in writing by the Publisher.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>