DREO DR-BBM001 Video Baby Monitor User Manual

: June 14, 2024
: DREO

DREO DR-BBM001 Video Baby Monitor

DREO-DR-BBM001-Video-Baby-Monitor-product

Product Information

Specifications

General System:
- Connectivity: 2.4GHz FHSS
- RF Frequency: 2400 MHz-2483 MHz
- Type of Modulation: GFSK
- Selectable Camera Channels: 4
Monitor:
- Resolution: 1280 X 780P
- Display: 5 inch TFT Color Display
- Input Voltage: 100-240V~50/60Hz
- Operating Voltage: 5.0V 2A
- Battery: 5000mAh
- Zoom: 2X & 4X
Camera:
- COMS Input Voltage: Operating Voltage
- Night Vision: Yes
- Pan & Tilt: No

Product Usage Instructions

Important Safety Instructions

Please read all cautionary markings on the appliance and safety instructions in the user manual before use.

General Safety:
- Not a Substitute for Proper Adult Supervision: You MUST check your children’s activities regularly.
- Not Intended for Use as a Medical Camera: This appliance should not replace adult supervision.
- Not a Toy: Do not allow children to play with this appliance.
- Risk of Suffocation: Keep all packaging materials out of reach of children.
Location Safety:
- Keep the baby monitor at a distance of at least 3 ft / 1m from the baby.
Electricity Safety:
- For household use only.
- Read and save these instructions.
FCC Statement:
- This equipment complies with FCC radiation exposure limits.
- Minimum distance of 20cm between the radiator and your body is recommended.
- This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Knowing Your Baby Monitor

Package Contents:

Camera
Baby Monitor
AC Adapter (For Camera)
USB Charger and Charging Cable (For Monitor)
Wall Mount Screw
User Manual
Quick Start Guide

Troubleshooting

If you experience any issues with the appliance, please refer to the troubleshooting section in the user manual or contact our customer support.

Dreo Customer Care

Contact us for expert support:

Website: www.dreo.com
Email: uk-support@dreo.com

FAQ

Q: How do I extend my warranty for free?

A: Scan the QR code or visit www.dreo.com/warranty to extend your warranty for free by registering your product.

Q: Where can I find more information and inspiration?

A: Join the Dreo community on Facebook: facebook.com/groups/dreobabycare

www.dreo.com

Looking for help?
Contact us to get expert support.

www.dreo.com

uk-support@dreo.com

WEEE Compliance

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)(Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

Thanks for Choosing DREO!
Your support means the world to us. We hope you enjoy our product as much as we did creating it.

EXTEND YOUR WARRANTY FOR FREE
Scan or visit dreo.com/warranty to extend your warranty for free by registering your product. If you have any product issues, we always stand ready to help.

uk-support@dreo.com
www.dreo.com

FOLLOW US TO DISCOVER MORE
Find us on social media to stay connected and find new inspiration.
Join the Dreo community on Facebook: facebook.com/groups/dreobabycare

IMPORTANT SAFETY INSTRUCTIONS

READ ALL CAUTIONARY MARKINGS ON THE APPLIANCE AND SAFETY INSTRUCTIONS IN THE USER MANUAL BEFORE USE.

General Safety

Not a Substitute for Proper Adult Supervision: You MUST check your children’s activities regularly. Not Intended for Use as a Medical Camera: this appliance should not replace adult supervision. Not a Toy:
Do not allow children to play with this appliance. Risk of Suffocation:
Keep all packaging materials out of reach of children.

Location Safety

Strangulation Hazard:
Children can be entangled in cords. Keep the appliance, adapter and power cords out of the reach of children at all times, at least 3 feet / 1 meter away.

Danger from Power Cords:

To avoid possible danger from power cords, the cords should be secured and never be hung on or near the crib or playpen. Do not place in the crib, bed or playpen.
Keep Away From Heat:
Do not install near any heat sources such as radiators, heat registers and stoves. Water and Moisture:
Do not use the appliance near water, including near a bathtub, sink, laundry machine, wet basement, etc.

Electricity Safety

Only use the AC adapters provided.
Do not insert anything into upgrade pinholes.
Do not block any ventilation openings.
Unplug the appliance during lightening storms.
Only use attachments and accessories provided.
Unplug the appliance when unused for long periods of time.

HOUSEHOLD USE ONLY READ AND SAVE THESE INSTRUCTIONS

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: this device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC 20cm Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

SPECIFICATIONS

DREO-DR-BBM001-Video-Baby-Monitor-fig-32

Gentle Reminder

Check the appliance regularly and refer to TROUBLESHOOTING or contact our customer support if it shows any of the following signs:

Power cord or plug is damaged.
Poor reception or excessive noise.

KNOWING YOUR BABY MONITOR

Package Contents
*Actual contents may vary depending on your purchase.

DREO-DR-BBM001-Video-Baby-Monitor-fig-3

Product Diagram

Camera

DREO-DR-BBM001-Video-Baby-Monitor-fig-4

Baby Monitor

DREO-DR-BBM001-Video-Baby-Monitor-fig-5

USING YOUR BABY MONITOR

Getting Started

Plugging in the Camera
Connect the camera to the power supply with the included AC adapter.
Place the camera and power cord out of reach of children. Camera is not battery powered. Keep plugged in when in use.
Charging the Monitor
Charge the monitor with the included USB charger.
It takes around 7 hours to fully charge. The charging indicator will turn on while charging and off when fully charged.
Pairing the Camera with the Monitor
By default, the camera has been paired with the monitor when manufactured. If the camera is disconnected, please refer to page 12.
Keep camera and monitor within a distance of 12-40 in (30-100 cm) when pairing. Note that microphone feedback might occur when they are close to each other.
Positioning the Camera
Keep the camera 1-5m (3-16 ft) away from your baby’s crib, playpen and baby bed for best viewing and safety reasons.
Wall Mounting the Camera (Optional)
Select a spot to mount the camera, ideally 1.5-2.5m high, keeping it beyond the reach of children. Install the included screw into the wall and mount the camera onto the screw.
Do not release the camera until you’re sure it is firmly mounted.

Functions & Operations

Interface Overview

DREO-DR-BBM001-Video-Baby-Monitor-fig-8
Menu Bar

DREO-DR-BBM001-Video-Baby-Monitor-fig-7

**Volume Settings

DREO-DR-BBM001-Video-Baby-Monitor-fig-8

**

**Brightness Settings

**

**Screen Timeout

**

**Add a Camera

**

**View a Camera

**

Delete a Camera
Auto Switch
Split Screen
VOX (Voice Activated Alert)
**Nursing Reminder

**

Talkback
Sleep Mode
Zoom In & Zoom Out
Pan & Tilt
Night Vision
The night vision is automatically activated in a dim environment. Infrared LEDs attached on the front of the camera allow you to see the baby in a dark room.
Temperature Alert
The monitor will prompt high temperature and low temperature alerts when the ambient temperature is below 50°F / 10°C or above 86°F / 30°C.
Other Settings

DREO-DR-BBM001-Video-Baby-Monitor-fig-22

TROUBLESHOOTING

Why won’t my baby monitor turn on?
- Make sure the monitor is turned on and there is still power left. Charge with the included power cable only.
- Check if the charging indicator is on. If not, please switch to another power outlet or change the adapter.
Is a WiFi connection required to set up and use?
- This non-WiFi appliance does not need internet connection for setup.
- The baby monitor and camera use 2.4GHz radio frequency for transmission.
Why won’t my baby monitor connect to the camera?
- Make sure the camera is securely plugged in. Check if the plug and power cord are damaged.
- Make sure the monitor is close to the camera when pairing.
- Check if there are large metallic objects like doors, refrigerators, mirrors that might block signal transmission.
- Check if there are existing 2.4GHz equipment like WiFi networks and microwave ovens that might interfere with signal transmission.
- Press the Menu Button, select through and press the PAIR button on the camera, then the camera will pair with the monitor automatically.
Why does the monitor screen keep switching off when I’m using it?
- Press the Menu Button, select through and press to set the desired time for the screen to turn off automatically.
- You may have the VOX (Voice Activated Alert) mode on so that the screen will only come on when the sound is above the alert level. You can switch this feature off within the menu.
Why is the screen black when I view a camera?
- Make sure the camera is in range and securely plugged in.
- Check if the plug and power cord are damaged.
- Adjust the monitor antenna to improve the signal strength.
Why is there no sound from the monitor?
- Check if the video volume is too low.
  Press the Menu Button, select through and press to set the desired volume level.
- Check if VOX mode is turned on.
  Note that in VOX mode the screen will stop broadcasting sounds from the camera side until the audio detected is above the alert level.
How should I clean and maintain my monitor and accessories?
- Never immerse in water or other liquids. They are not waterproof.
- Clean with a dry cloth only. Exercise caution when cleaning the camera lens.
- Clean the temperature sensor on the camera with a dry cotton swab on a regular basis.
Why is the temperature shown on the monitor not accurate?
- The temperature sensor is on the camera. Please make sure there is enough air circulation around the sensor.
- Do not place the camera near heat sources, including heaters, air-conditioning vents, and lamps.
- The air at the ceiling is warmer than the air at the floor. Place the camera at a relatively low height to read the temperature more accurately.
- Power the monitor and camera off and on again, reset the monitor to factory settings, and pair the camera with the monitor again.
Why did the monitor video suddenly turn black and white?
- Night vision may have become activated. Turn on the room lights and night vision will turn off automatically.
Why is the screen a bit choppy?
- Make sure the camera is in range. Adjust the monitor antenna to improve the signal strength.
My baby monitor makes a noise.
- Microphone feedback might occur when the monitor is too close to the camera. Keep them away from each other.
- Volume is too high. Press the Menu Button, select through and press to lower the volume.
- The camera is not in range. Please keep the distance within 30 feet / 10 meters.

DREO CUSTOMER CARE

Default 12-Month Warranty
This appliance is covered by Dreo warranty for 12 months from the date of its original purchase.

Extend Your Warranty
Extend your warranty by registering your new appliance on our website https://dreo.com/warranty.

The warranty will not apply in cases of:

Accident, misuse, or repairs performed by unauthorized personnel.
Any unit that has been tampered with or used for commercial purposes.
Normal wear and tear of wearable parts.
Use of force, damage caused by external influences.
Damage caused by non-observance of the User Manual, e.g. connection to an unsuitable mains supply or noncompliance with the instructions.
Partially or completely dismantled appliances.
Defects caused by or resulting from damages from shipping or from repairs, service, or alteration to the product or any of its parts that have been performed by a repair person not authorized by Dreo.
We can only provide after-sales service for products that are sold by Dreo or Dreo authorized retailers and distributors. If you have purchased the appliance from a different place, please contact your seller for return and warranty issues.