Pyle PPHP28AMX Portable Wireless Bluetooth Sound System User Guide

Pyle PPHP28AMX Portable Wireless Bluetooth Sound System

WARNING!

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER OF THIS UNIT.

THERE ARE NO USER – SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO A QUALIFIED TECHNICIAN.

The lighting flash with arrow head symbol within an equilateral triangle is intended to alert the user to the presence of  “dangerous” voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of Electric shock to humans. Users should exhibit extra safety when this symbol appears in this instruction manual and follow all precautions as they are stated   .

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in this manual.

SAFETY INSTRUCTION

1. Please read the user manual carefully before use and retain for future reference.

2. The power supply must match the demand of the device with reliable ground wire.

3. All covering signal should be complied with the demand of device.

4. The device should be located far away from high temperature, moisture and powerful electromagnetic field.

5. Max operating temperature is 113°F.

6. No naked flame sources, such as lighted candles, shall be placed on the product.

7. Clean only with dry cloth – The appliance should be cleaned only as recommended by the manufacturer.

8. When not in use, unplug the unit from the mains.

9. To establish a safe level:

10. Start your volume control at a low setting.

11. Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.

12. Only use suitable means of transportation if you want to move the speaker.

Note

• Once the BLUETOOTH devices are paired, there is no need to pair them again.

• If the speaker is connected via Bluetooth device but does not play with sound, please turn off nearby devices and only leave one device to re-connect with the speaker.

• When inserting the USB/SD Card , make sure the direction you selected is correct. Never insert violently to avoid damaging the USB/SD Card or the unit. If it doesn’t work, please check if the direction is correct.

• Turn off and pull out the USB/SD before turning off the speaker.

CONTROL PANELS

1. MP3 Player Button

   • MODE: Short press Press to switch between USB/ SD/BLUETOOTH.

   • Short press : Switch Previous Song,  Long press Voice DOWN

   • Short press : Switch next Song,  Long press Voice UP

   • REPEAT : Repeat between RA (Repeat all)/RO (Repeat One)/RR (Repeat randomly)

   • Short press : Play/Pause long press to  FOLDER tracking.

2. Blue LED Display

3. USB port

4. SD port

5. Channel 1-4 XLR Connector:

6. Connect Microphone and Line input using the XLR cables.

7. Mic / Line Input Selector Channels: When connecting a microphone set the selector to MIC. When connecting a Line input set this selector to Line.

8. Treble Knob: Channels 1-4 have individual treble controls per channel.

9. Use this knob to adjust the treble levels for the selected channel.

10. Bass Knob: Channels 1-4 have individual bass controls per channel.

11. Use this knob to adjust the bass levels for the selected channel.

12. Effects Knob: Channels 1-4 have individual effects controls per channel.

13. Use this knob to adjust the reverb effect levels for the selected channel.

14. Volume Knob: Channels 1-4 have individual volume controls per channel. Use this knob to adjust the volume levels for the selected channel.

15. 1/4” Line Input: Connect your sound source to this 1/4” input. The line volume will be controlled by channel 5/6 volume control and master volume

16. Knob. Only passive signals should be the connected input.

17. RCA Line Input: Connect your sound source to this RCA input (6/7 Channel). Only passive signals should be the connected input.

18. RCA Line Output: Use this connector to connect other amplifier.

19. DO NOT connect directly to a passive speaker.

20. Line/MP3 Selector: When you use USB SD Bluetooth signal push down, When you use Mic/Line input signal push the selector up.

21. Signal input Volume Knob:

    • Adjust the volume for MP3 or MIC/Line signal input.

    • Master Volume Knob: Adjust all the output signal for the powered mixer.

    • Indicator: Displays the signal volume for output.

    • Phantom Power: Press this button to activate the 15V phantom power necessary for a condenser (capacitance) Microphone which might require 15V power supply from the mixer Channel 1-4 input.

    • 5 Band Graphic Equalizer: Adjusts the frequency of output signal.

    • Depth Knob:

    • Adjust the depth effects level of 1-4 Channel for Microphone input.

    • ECHO Volume Knob: Adjusts the ECHO Level for MIC input.

PPHP28AMX

Stage & Studio DJ Speaker & Mixer Bundle Kit – (2) 8’’ Bluetooth PA Loud- Speak-ers, 8-Ch. Audio Mixer, Speaker Stands, Wired Microphone (300 Watt)

Features

• All-in-One DJ Audio Loud-Speaker Kit

• 8-Channel Powered Amplifier Audio Mixer

• Dual Molded Cabinet PA Speakers

• Sound System: (2) 8’’ Speakers, (2) 1’’ Tweeters

• Bluetooth Wireless Music Streaming Ability

• Active 2-Way, Full Range Stereo Sound

• MP3 Digital Audio File Support

• USB Flash & SD Memory Card Readers

• +48V Phantom Power

• (4) XLR 3-Pin Connectors

• (2) 1/4” Microphone / Guitar Inputs

• Independent Adjustable Channel Controls

• Treble, Bass, Effect Volume Configuration

• 5-Band Graphic EQ

• Digital Echo Effects Control

• RCA (L/R) Audio Line Input/Output Jacks

• Universal Speaker Stand Mount Support, 35mm

• Rugged & Heavy-Duty Molded Cabinet Housing

• Ability to Connect Additional Microphones, Instruments,

• DJ Equipment

• Convenient System Design Assembles & Disassembles for Quick Setup

• Perfect for On-Stage Performances, Crowd Control, Public Gathering Events

Bluetooth Wireless Streaming

• Instantly Receives Wireless Music Streaming Audio

• Works with All of Your Favorite Devices (iPhone, Android, Smartphones, iPad, Tablet, MP3 Player, etc.)

• Bluetooth Version: 3.0

• Bluetooth Network Name: ‘PyleUSA’

• Bluetooth Wireless Range: Up to 65′ ft.

Technical Specs

• Speaker Power Output: 300 Watt MAX

• Tweeter Type: 1″

• Titanium Horn Driver (x2)

• Subwoofer Type: 8’’ Long Throw (x2)

• Subwoofer Frequency:

• 48Hz-4500Hz (±10dB)

• Speaker Magnet: 30 oz (x2)

• Impedance: 4 Ohm

• Speaker Sensitivity: 90dB

• Power Mixer Sensitivity: -14dB

• S/N Ratio: 75dB

• H.D.: 9.2%

• Frequency Response:

• 48- 18Khz (±10dB)

• Maximum USB/SD Card Support:

• Up to 32GB

• Digital Audio File Support: MP3, WMA, MP3Pro

• +48V Phantom Power: ON/OFF

• Power Supply: 100-240V, 60/50HZ

• Single Speaker Dimensions (L x W x H): 11.22’’ x 9.84’’ x 17.72’’ -Inches (Each)

• Amplifier Mixer Dimensions (L x W x H): 11.61’’ x 7.09’’ x 18.11’’-Inches

• Sold as: 1

What’s in the Box?

• Amplifier Mixer Console

• (2) 8’’ PA Speakers

• (2) Tripod Speaker Stands

• (2) 1/4’’ Connection Cables

• Wired Handheld Mic

• Power Cable

Frequently Asked Questions

Can I plug my guitar into it?

Yes you can plug your guitar into the mixer.

Is it possible to buy an extra microphone to go with this unit, one like that came with it?

Yes you can.

I already have an amplifier. Could I connect amplified signal to this unit?

You can connect the speaker to your amplifier as long as your amp can handle the wattage.

Can this be connected to an inverter?

You don’t need a power inverter to this unit. It can handle 110 to 240 volts.

What is the RMS power rating and is one speaker a passive one

yes it is a passive and active speaker. The RMS is 150 watts.

Do the speakers accept Standard 1/4″ cables? In case I wanted to use a longer cable?

Yes it does.

Can i connect a microphone, a guitar, and a stomp pad in this system at the same time?

Possibly depending on the what connections you have. It has 4 inputs.

How many watts must my inverter tolerate in order for it to work from my car? Planning to use it for a political campaign pickup truck

You may use 300 or higher wattage if you wanted to use the unit to an inverter.

Can this support a passive stage monitor?

Yes you can use monitor to this unit.

Can you use a keyboard with this?

Yes you may use the Line input port at the back of the unit.

I am looking to use 4 mics with this unit, would it be possible? Prefer wireless mic setup.

I think it has enough inputs BUT this unit is very basic and out of date really. Doesn’t have a CD player, no display and maybe worst of all, doesn’t even have a remote. You want to switch to the next track? You’d better have it sitting right beside you. In no way would I recommend this. There are much much more modern and better units for MUCH better prices.

Which Pyle speaker stands come with it? which model?

the unit comes with PSTK107 speaker stand model.

What is the RMS (root mean square) or continuous watt rating of this speaker (the description only includes max or peak watt power)?

I would estimate that it is less than half of the peak wattage listed at 300 max. It is definitely under powered in terms of efficiency, thus it breaks up way too early for what is listed.

Is this stereo or mono?

Both. Stereo feed on the MP3/stereo channel is represented as stereo. The mono channels go out both speakers. There’s no ability to pan the mono inputs.

How long are the power cables?

There is only one power cable that goes to the amp. It isn’t very long but the sound cables that go to the speakers are

Can I connect multiple sets of microphones?

It comes with one and I think there is a way to add another ‘wired’ one.

I do karaoke in a bar setting, so a little noisier than most places. Would this put out enough sound to be heard over the crowd?

Yes it will. If you are in a really large building you may want to go with 500w. But if for standard size bar, they will work perfect. Easy pack up, and stores well. My husband loves his. Extremely powerful and worth it.

Is there a way to connect cerwin-vega v-15b 15″ passive speaker to the mixer? if so, which cables or adapters will i need?

you can only connect 2 speakers to this unit.

Does this unit have a ‘aux out’ connection, maybe to plug it into a mic jack on a laptop for a zoom meeting?

You may need to use a converter for your mic to connect it to the XLR port. For laptops, connect them to the aux in ports.

Does it come with an inbuilt battery?

The unit doesn’t have a built-in battery.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>