BLUETTI B80P Portable Solar Power Station User Manual

: June 14, 2024
: Bluetti

Table of Contents

BLUETTI B80P Portable Solar Power Station
Product Information
Product Usage
Safety Instructions
What’s In The Box
Product Overview
Speciﬁcations
Operation
Discharging
Appendix
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BLUETTI B80P Portable Solar Power Station

BLUETTI-B80P-Portable-Solar-Power-Station-product

Product Information

Specifications

Model: B80P Portable Power Station
Solar Input Voltage Range : DC 12V~28V
Weight : 55kg

Product Overview
The BLUETTI B80P Portable Power Station is a sustainable energy storage solution designed for both indoor and outdoor use. It is a reliable and eco- friendly power source trusted by millions of customers worldwide.

Safety Instructions

General Safety

Charge the unit before first use.
Do not use solar panels with open circuit voltage higher than 28V.

Handling
Use mechanical assistance, such as trolleys and adjustable height workbenches, when handling the product.

Storage and Usage

Charge the unit when the State of Charge (SoC) drops below 5%.
If the SoC drops to 0, power off the unit and charge it for at least 30 minutes before restarting.
If not used for more than 3 months, charge the unit to 40%~60% SoC and store it with the power off. Discharge and charge the unit every 3 months for optimum battery life.

What’s In The Box

Standard Packaging

1x B80P Portable Power Station
1x Battery Expansion Cable (800mm)
1x User Manual

Optional (Available on official BLUETTI website)

TYPE-C Cable (5A/100W, 2m)
Car Charging Cable (16AWG, 720mm)
Solar Charging Cable (16AWG, 1500mm)
Extended Battery Expansion Cable (1830mm)
Power Bank Output Cable (14AWG, 720mm)
200W Charger

Product Usage

Buttons
The B80P Portable Power Station features the following buttons

Power Button
DC Power Button

Power Indicator
The power indicator on the unit provides information about the current power status.

Charging
To charge the unit

Ensure the unit is powered off.
Connect the DC input to an AC source or a solar system with an output of more than 100W.
The unit will start charging and the power indicator will show the charging progress.

Discharging
To discharge power from the unit

Ensure the unit is powered on.
Connect your devices to the available ports (USB-A, USB-C, Cigarette Lighter Port, etc.).
The unit will supply power to your devices.

FAQs

Q: What should I do if the SoC drops to 0?
A: If the State of Charge (SoC) drops to 0, take the following actions to safely restart the unit

Shut down the unit immediately.
Charge the unit within 48 hours.
Keep the battery at an ambient temperature of 50°C to 35°C for 24 hours before charging.
It is recommended to charge the unit via an AC source. If charging via solar energy, ensure that your solar system provides an output of more than 100W.

Q: What is the weight of the B80P Portable Power Station?
A: The weight of the B80P Portable Power Station is 55kg.

Warning

Charge the unit before ﬁrst use.
Do not use solar panels with open circuit voltage higher than 28V. Solar input voltage range for the unit is DC 12V~28V.
Charge the unit when the SoC drops below 5%. If the SoC drops to 0, power off the unit and charge it for at least 30mins before restarting.
If not used for more than 3 months, charge the unit to 40%~60% SoC and store it with the power off. For optimum battery life, discharge and charge the unit every 3 months.

Thank You!
Thank you for making BLUETTI a part of your family.
From the very beginning, BLUETTI has tried to stay true to a sustainable future through green energy storage solutions for both indoor and outdoor use while delivering an exceptional eco-friendly experience for our homes and our world. That’s why BLUETTI makes its presence in 70+ countries and is trusted by millions of customers across the globe.

BLUETTI-B80P-Portable-Solar-Power-Station- 12

Safety Instructions

Read this manual for instructions on the proper use and safety information for the unit. Follow the warnings and instructions marked on the unit and its accessories.
Pay attention to the “Instruction”, “Caution”, “Warning” and “Danger” symbols in this manual, and follow the instructions carefully to avoid injury or damage.
The Safety Requirements provided herein are for illustrative purposes that include but are not limited to those listed in this manual. Actual operation shall comply with all applicable safety standards.
If you have any questions, feel free to contact BLUETTI support or your local BLUETTI dealers.

General Safety

Always operate or store the unit in the conditions speciﬁed in this manual.
The installation and ambient conditions must comply with the regulations in the relevant international, national or regional standards.
Unauthorized disassembly, alteration of the equipment or modiﬁcation of the software code is not allowed.

BLUETTI shall not be liable for the following circumstances

Equipment damage caused by force majeure, such as earthquake, ﬁre, storm, ﬂood, mudslide, etc.
Damage or loss during transportation.
Damage caused by storage conditions that do not meet the requirements speciﬁed in this manual.
Damage to the hardware or data of the equipment due to customer negligence, improper operation or intentional damage.
Damage to the system caused by a third party or the customer, including handling and installation that does not meet the requirements speciﬁed in this manual.
The product is intended for use with audio/video, information and communication technology equipment only.
This product is not suitable for providing electrical service for equipment and machines that are highly dependent on the reliability of electrical power supply and that involve personal safety, such as atomic energy, aviation, medical, etc. Poweroak will not be held responsible for any personal safety accidents, ﬁre accidents, equipment failures, etc. caused by using this product to supply power to the above equipment and machines.
Damage caused by adjustment, alteration or removal of identiﬁcation marks.

To avoid danger, please regulate the operation in the following manner
Do not install, use and maintain the unit in adverse weather conditions such as lightning, rain, snow and strong breezes (including but not limited to handling and operating the unit, plugging and unplugging signal connections to outdoor facilities, working at height, outdoor installations, etc.).

Always turn off the power source before starting any electrical work.
Do not clean the unit with water.
Do not disassemble, modify, tamper with or repair the unit on your own.
Regularly inspect the unit and its accessories for damage or deterioration.
Use a tester to check for the presence of dangerous voltage before touching any conductor or terminal.
If the unit’s shell is cracked during transportation or use, do not use it and contact BLUETTI support or your local BLUETTI dealers.
Use a dry powder extinguisher if the unit catches ﬁre.
In case of ﬁre, EVACUATE the building or affected area immediately, activate the closest FIRE ALARM system and CALL 9-1-1 or your local emergency phone number.
Use genuine cables and accessories provided by BLUETTI.
Keep the unit away from heat sources or high temperatures, and do not expose it to direct sunlight.
Do not store the unit with ﬂammable liquids, gases, or explosive materials.
Make sure the area where you are using the unit is well ventilated and spacious.
Do not block or cover the vents of the unit as this may cause irreversible damage to it.
Use the unit for its intended purpose and avoid stacking objects on top of it during storage or use.
Do not move the unit during operation as the vibrations and shocks associated with movement may cause damage to the internal hardware.
In case of malfunction, turn off the unit immediately and contact BLUETTI support or your local BLUETTI dealers if this manual cannot adequately explain the malfunction to you.
Do not place the unit on an unstable or inclined surface.
Do not insert foreign objects into any port and vent of the unit.
Keep away from children and pets.

The symbol is intended to alert you to read the instructions before operating and maintenance in the literature accompanying the product.

The product is intended for use with audio/video, information and communication technology equipment only.
Connect the equipment to a socket-outlet with earthing connection by means of a power cord.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Disposal of a battery into ﬁre or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of ﬂammable liquid or gas
The battery subjected to extremely low air pressure that may result in an explosion or the leakage of ﬂammable liquid or gas
Attention should be drawn to environmental aspects of battery disposal.
Please refer the information on exterior bottom enclosure for electrical and safety information before installing or operating the apparatus. Please refer the information on exterior bottom enclosure for electrical and safety information before installing or operating the apparatus

Legal and Regulatory Requirements

The transportation, wiring and maintenance shall comply with all applicable laws, regulations and standards.
User-provided materials and tools required shall meet the requirements speciﬁed in applicable laws, regulations and relevant standards.

Handling
Use mechanical assistance as needed (e.g. trolleys and adjustable height workbenches).

Recommended number of people based on the weight of product

Weight	Number of people
<18kg	1
18kg~32kg	2
32kg~55kg	3
>55kg	4 or a cart

Storage and usage

When not using the unit for over 3 months, charge it to 40% to 60% SoC to keep it in optimal condition.
Before storing the unit, power it off and remove all electrical connections from it.
Store the unit in a cool and dry place. The ideal temperature range is 1o0C to 300C. The unit can be safely charged and discharged at temperatures of -200C to 400C. However, it’s NOT recommended to store the unit in harsh temperatures for extended periods of time.
Fully cycle the unit every 6 months to maintain the battery’s health.

If the SoC drops to 0 (during operation or upon startup), take the following

actions to safely restart the unit

Shut down immediately.
Charging within 48 hours.
Battery should be kept at an ambient temperature of 50C to 350C for 24 hours before charging.

It is recommended to charge the unit via an AC source. If charging via solar energy, ensure that your solar system provides an output of more than 100W.

BLUETTI shall not be liable for any equipment damage caused by the violation of above instructions.

What’s In The Box

Standard Packaging

$BLUETTI-B80P-Portable-Solar-Power-Station- $1$$

Optional
(Available on ofﬁcial BLUETTI website)

$BLUETTI-B80P-Portable-Solar-Power-Station- $2$$ $BLUETTI-B80P-Portable-Solar-Power-Station- $3$$

Product Overview

Diagram
The BLUETTI B80P can be used with AC60P as an external expansion battery, or as a DC power station to run your devices independently. It offers up to 120W output with 3 DC ports – USB-A, USB-C and car cigarette lighter port, perfect for your phone, laptop, car fridge, and more. While LiFePO4 battery cells and an advanced battery management system (BMS) protect your device from a variety of potential risks during daily operation. When connected to AC60P, it adds extra 806Wh capacity to the whole power system for longer device runtime.

Cigarette Lighter Port
Power Button
DC Input
Power Indicator
DC Power Button
USB-A Port
USB-C Port
Battery Expansion Port
Bleed Valve

Speciﬁcations

Model	B80P

Operation

Buttons

B80P has a power button and a DC output button.

Press the power button to start up B80P. Press and hold for more than 2 seconds to turn it off.
Press the DC power button to turn on/off the DC output (cigarette lighter and USB output).

Power indicator
BLUETTI B80P has 5 LED indicators. From left to right, they represent 20%, 40%, 60%, 80%, 100% SoC, respectively.

Charging
B80P supports 4 charging methods : AC60P charging, solar, car (cigarette lighter) and adapter.

AC60P Charging
Connect the AC60P and B80P and plug the AC60P into a wall outlet via the AC charging cable. The AC60P will automatically charge the B80P.

$BLUETTI-B80P-Portable-Solar-Power-Station- $6$$

Solar Charging
Connect the solar panels (in series or parallel) to B80P via the solar charging cable.

Note: Please make sure your solar panels comply with

Voc: 12V-28VDC Input Current: 8A Max. Input Power: 200W Max.

$BLUETTI-B80P-Portable-Solar-Power-Station- $7$$ Warning: The open circuit voltage of solar panels cannot exceed 28V, otherwise it will damage the device.(Note: This is not covered in the warranty.)

Car Charging
Connect the B80P to vehicle’s 12V/24V cigarette lighter port via the car charging cable.

$BLUETTI-B80P-Portable-Solar-Power-Station- $8$$

Warning: Cigarette lighter must be completely plugged in, otherwise it may cause safety risks.

Adapter Charging
The B80P can be charged via adapter. Please make sure the output voltage of adapter is between 12V~28VDC.

$BLUETTI-B80P-Portable-Solar-Power-Station- $9$$

Discharging

DC Output
The operation time of B80P is subject to many factors, such as ambient temperature, discharge rate, battery capacity, altitude, load characteristics, etc.

12V/10A cigarette lighter
USB-C (5/9/12/15/20VDC, 3A; 20VDC, 5A)
USB-A (3.6-12VDC, 3A,18W Max.)
Expansion Port (22.4VDC, 30A Max.)

Connect to AC60P
With the battery expansion cable, AC60P supports up to 2 B80P expansion batteries for a total capacity of 2115Wh. Turn on AC60P to activate the whole power system.

Note : Make sure the AC60P and B80P are off when connecting and disconnecting cables.

$BLUETTI-B80P-Portable-Solar-Power-Station- $10$$ Power Bank Mode
Connect the B80P to a compatible power station via the power bank output cable, press and hold its power button for about 5s, and it can recharge the power station directly.

Note
In Power Bank mode, the B80P delivers a voltage of up to 25VDC. Please check the DC input voltage of your BLUETTI power station for compatibility.

$BLUETTI-B80P-Portable-Solar-Power-Station- $11$$ Estimated Operation Time
Operation time (estimated) = Battery capacity (Wh) × DoD × η ÷ (load power)

Note

Load power and operation time are measured in watts and hours.
DoD refers to depth of discharge. B80P works at 90% DoD for longer battery life. η is the conversion efﬁciency of the inverter, which is 90% for B80P.

E.g. If you run a 40W refrigerator with B80P, the operation time will be
806Wh × 90% × 90% ÷ 40W ≈ 16 hrs

Note: Low temperature and excessive loads could greatly impact the battery capacity and reduces its normal operation time.

Appendix

The BLUETTI B80P Portable Solar Power Station is a cutting-edge, reliable energy solution designed for outdoor enthusiasts, campers, and emergency preparedness. This compact and portable power station boasts an impressive 2000-watt-hour capacity, providing ample electricity to charge your essential devices, run small appliances, and even power sensitive electronics.

Equipped with advanced lithium iron phosphate (LiFePO4) battery technology, the BLUETTI B80P offers a longer lifespan, improved safety, and a high energy density. Its compatibility with multiple charging options, including solar panels, AC outlets, and car chargers, ensures flexibility in various environments. The intuitive LCD display provides real-time information on power usage and battery status, allowing users to manage their energy consumption efficiently.

FAQs

How do I know whether my devices will work well with this product?

Please evaluate the total constant load of your devices. If it doesn't exceed the Max. output power of B80P (120W), you can use this power station to run your devices. Note Some devices with built-in motor/compressor may start at 2-4 times the rated power, which can easily overload the B80P.

Can I use third-party solar panels to charge this product?

Yes, you can. Make sure your solar panels have an open circuit voltage of 12V- 28V and have the MC4 connectors. Please do NOT mix different types of solar panels. Note Time required for one full charge depends on weather condition, the sunshine intensity and the angle of solar panels.

Can it charge and discharge at the same time?

Yes. It supports pass-through charging. B80P comes with the premium LiFePO4 battery and proprietary Battery Management System to ensure that it can charge and discharge at the same time.

Why does the B80P shut down automatically?

Two scenarios in which B80P shuts down itself If DC output is not turned on after power on, it will automatically shut down after 4 hours. If DC output is less than 10W, it will automatically shut down after 24 hours.

Why is the charging power often too low?

B80P has a built-in intelligent BMS that automatically adjusts the charging power in response to the battery temperature and SoC, thus protecting the battery and extending its service life.

Abbreviations

MPPT: Maximum Power Point Tracking
SoC : State of Charge
AC : Alternating Current
DC : Direct Current
PV : Photovoltaic (Solar Panels)
DoD : Depth of Discharge
ECO mode : It’s an energy-saving mode(It’s on by default). It can not be turned off. If DC output is not turned on after power on, it will automatically power down after 4 hours.