PUREMATE PM1515 2500W Oil Filled Radiator Instruction Manual

2500W Qil Filled Radiator
Model NO: PM1515
INSTRUCTION MANUAL

This Product is only suitable for well insulated spaces or occasional use.
Thank You For Purchasing The Innovative Product the PUREMATE 2500W OQil Filled Radiator We Wishes You Many Years Of Healthy indoor Air With This Efficient and Effective Product.

SAFETY PRECAUTIONS

When using electriical cppliances, basic safety Precautions should always be followed including the Following.
Read and Follow all Instructions Carefully:
PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY BEFORE USING THE APPLIANCE.
— Children of less than 3 years should be kept away unless continuously supervised.
— Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate ind clean the appliance or perform user maintenance.
— CAUTION: Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.
— If the supply cord is damaged, it must be replaced by the manufacturer, its Service agent or similarly quadlified persons in order to avoid a hazard.
— WARNING: In order to avoid overheating, do not cover the heater. The Meaning of figure in marking is “DO NOT COVER”.
— The heater must not be located immediately below a socket-outlet.
— Do not use this heater in the immediate surroundings of a bath, a shower or a Swimming pool.
— This appliance only for household use.
— WARNING: Do not use this heater in small rooms when they are occupied by Persons not capable of leaving the room on their own, unless constant Supervision is provided. This heater is filled with a precise quantity of special oil. Repairs requiring Opening of the oil container are only to be made by the manufacturer or his service agent who should be contacted if there is an oil leakage. Regulations Concerning the disposal of oil when scrapping the appliance have to be Followed.
— DO NOT USE this heater if it has been dropped.
— DO NOT USE if there are visible signs of damage to the heater.
— Use this heater on a horizontal and stable surface, or fix it to the wall, as Applicable.
— WARNING: To reduce the risk of fire, keep textiles, curtains, or any other Flammaible material a minimum distance of Tm from the air outlet.
— DO NOT attempt to repair, disassemble or modify the appliance. There are no User-Serviceable parts inside.
— CAUTION: If using an extension lead please ensure you do not exceed the Maximum rated running wattage/Load of the extension lead.
— Disconnect from mains when not in use or when moving or cleaning.
— The heater is hot when in use. To avoid burns, do not let bare skin touch hot Surface.
— Allow the heater to completely cool before handling or cleaning it.
— Ensure the heater is in the “0” OFF position and the power cord is unplugged From the electrical outlet before cleaning the heater.
— DO NOT allow water or other liquids to run into the interior of the heater, as this Could create a fire and/or electrical hazard.
— DO NOT use any abrasive cleaners or solvents, as heater damage will occur.

COMPONENTS

1. Castor wheels
2. Power Switch Dial
3. Thermostat Dial
4. Indicator Light
5. Carry Handle
6. Front Cover
7. Radiator Fins
8. Cord Storage
9. 24 Hour Timer

OVERHEAT PROTECTION: If the temperature of the heater Reaches to high, the thermostat will automatically switch Off the power and the heater willimpede working. Once The heater has cooled, the heater can be used normally. This may occur during improper use or certain Enviroment conditions.
TIP-OVER PROTECTION: If the heater is knocked over or Tipped onto its side, the safety switch will automatically Disconnect power. Power will return to normal when the Unit has been placed upright onto a flat, even surface.

ASSEMBLY

1. Unpack the castor wheels and arc-shaped brackets from the heater packaging
2. Turn the radiator upside-down on a scratch-free and stable surface to prevent Damage to the paint finish or your floor surfacing.
3. Fitthe two (2) castor wheels onto the radiator by placing the arc-shaped Brackets between the outermost radiator fins on each side of the radiator.
4. Securely fasten the two (2) castor wheels onto the radiator by screwing two (2) Wing nuts onto each foot.
5. Turn the radiator back upright once the castor wheels have been fitted.

CAUTION: Only operate the radiator when in its normal upright position with the Castor wheels fitted to the bottom of the unit

OPERATING INSTRUCTIONS

1. Ploce the heater upright on a flat, steady and heat-resistant surface.
2. Turn the thermostat dial anti-clockwise to LOW and ensure the power switch is ‘0″ OFF.
3. Insert the plug into a suitable socket.
4. Turn the power switch dial clockwise to the desired power:
   | Low Heat
   ---|---
   | Medium Heat
   | High Heat

NOTE: Do not force knob beyond its normal stop position

5. Turn the thermostat dial clockwise until you hear a click and the light turns on. Turning the thermostat clockwise will keep the radiator on until the room gets warmer. Turning it anti-clockwise will turn it off until the room has cooled to a Lower temperature and then it will switch on. The radiator automatically rotates through an on-and-off cycle to maintain the current room temperature according to the thermostat’s setting. It is normal for it to heat up and cool down Periodically.
   NOTE: IF THE HEATER DOES NOT TURN ON, ENSURE THE TIMER SWITCHIS SETTO ‘I’.

6. To tun off the heater, turn the power switch dial anti-clockwise to “0” OFF.

7. Unplug the heater from the electrical outlet when it is left unattended or is not in use.

TIMER FUNCTION

The heater can be set to turn ON and OFF at the time you want. Before setting a timer, the clock must be set to the correct time. DO NOT turn the clock anti-clockwise. There are 96 segments around the dial – each representing 15 Minutes of the day.

SETTING THE TIMER

1. Plugin the heater.
2. Set the power and temperature to the desired setting.
3. Turn the dial clockwise to set the clock to the current time of the day.
4. Push the segments outwards for the period you want the heater on. For Example, the diagram above shows the heater will turn on between 1AM to 3AM (Fig.2).
5. Push the timer switch to the clock symbol.
6. Once you have set the segments for the desired heating period, the heater will Cycle on and off according to these settings.
7. Once unplugged, the heater timer will stop and will need to be reset.

NOTE:
When you first use the heater, all 15 minute segments should be inwards. To Begin using the timer, push the segments outwards that represent the time of the day you want the heater to work. The heater will switch off again after That period has elapsed.

CLEANING TIPS

— Clean the exterior surface of the heater by wiping it with a soft, damp cloth.
— Store the heater in a clean, dry place when it is not in use.
CAUTION
— Allow the heater to completely cool before handling or cleaning it.
— Ensure the heater is in the “0” OFF position and the power cord is unplugged From the electrical outlet before cleaning the heater.
— DO NQOT allow water or other liquids to run into the interior of the heater, as this Could create a fire and/or electrical hazard.
— DO NOT use any abrasive cleaners or solvents, as heater damage will occur.

SPECIFICATION

1300W (Medium Setting),
2500W (Highest Setting),
Certifications:| UKCA , CE , Rohs
Warranty:| 1 Year
DIMENSIONS (L X W X H):| 50 (L) X 24 (W) X 62 (H) CM
NET WEIGHT:| 11.4 Kg
GROSS WEIGHT:| 12.6 Kg

DISPOSAL OF THIS DEVICE

At the end of the product life cycle, you should not throw this machine Into the normal household garbage but bring the product to a collection Point for the recycling of electrical and electronic equipment.

FIND US ONLINE

Model identifier (s): PM 1515

Item| Symbol| Value| Wit| Item| Unit
Heat Output| Type of heat input, for electric storage local space heaters only (select one)
Nominal heat output| Pnom| 3.| kW| Manual heat charge control, with Integrated thermostat| No
Minimum heat output(indicative)| Prrin| 1.| kW| Manual heat charge control with room and/or outdoor temperature feedback| No
Manmum continuous heat output| Pmax c
,| 3.| kW| Electronic heat charge control with room and/or outdoor temperature feedback| No
Auxiliary electricity| | | | Fan assisted heat output| No
At nominal heat output| elmax| N/A| kW| Type of heat output/room temperature control select one)
At minimum heat output| elmin| N/A| | Single stage heat output and no room temperature control| No
In standby mode| eISB| 0.00025| kW| Two or more manual stages, no room temperature control| No
Seasonal space heating energy efficiency| 36%| | With mechanic thermostat room temperature control| YES
| With electronic room temperature control| No
Electronic room temperature control plus day tinier| No
Electronic room temperature control plus week timer| No
Other control options ( multiple selections possible)
Room temperature control, with presence detection| No
Room temperature control, with open window detection| No
with distance control option| No
with adaptive start control| No
with working time limitation| YES
with black bulb sensor| No
Contact details| Super Tech Health Ltd, 129 Shady Lane Birmingham B44 9ER United Kingdom

2500W Oil Filled Radiator | Model NO: PM1515
Super Tech Health Limited
129 Shady Lane
Great Barr
Birmingham
West Midiands
B44 9ER
United Kingdom
WWW.PUREMATE.CO.UK
© Copyright 2021

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>