niceboy S10 Radar 4K Dash Cam User Manual

niceboy S10 Radar 4K Dash Cam

DESCRIPTION

1.  MicroSD slot: used to insert an SD card.
2.  Power on/off: long press to power on/off the camera. The camera must be connected to power to turn it on.
3.  Rear camera input: used to connect the rear camera.
4.  USB-C: used to power the camera.
5.  Speaker: used to play sounds.
6.  Lens: full glass camera lens
7.  Reset: resets the camera if necessary.
8.  Motion microphone: used to record sounds.
9.  Positionable holder: used to adjust the angle of the camera and attach the adhesive part.
10.  Adhesive part of the holder: used to attach the camera to the car glass.

ATTACHING THE CAMERA TO THE GLASS

First, place the adhesive part of the holder (10) on the car glass. The 3M sticker is used for permanent attachment (after removing and re-sticking, it will no longer hold perfectly). Stick the adhesive part only on the glass. Before sticking, clean the glass properly (degrease), the glass must be completely dry. Install at temperatures around 20°C. After sticking the Adhesive part (10) on the glass, attach the camera to it: Insert the adjustable holder (9) into the glued Adhesive part (10) and move the camera to the right. With the opposite movement, you can remove the camera from the glued part.

MICROSD CARD

Choose a branded microSD card with fast video recording (type USH-I U3 and faster) with a maximum capacity of 256 GB. Before first use in the came-ra, the card must be formatted in a PC to the FAT32 file system (formatting will erase all data on the card).
Recommendation: regularly format the memory card in the PC to avoid problems when recording video. If you use the camera daily, format the card at least once a month.
More information about the use of the memory card and its formatting will be provided by the manufacturer of the selected memory card.

CAMERA POWER SUPPLY

The camera can be connected to the power source using a car adapter (part of the sales package), or via a USB cable connected to a PC or an adapter for charging a mobile phone. A power bank can also be used.
For the GPS AND radar reporting function, the camera must be connected to the power supply only using the supplied original cable with GPS.
Warning: the camera is not equipped with a battery, but with a supercapacitor, which is safer from the point of view of use in a car (it is not damaged due to temperature changes, it tolerates both frost and high temperatures better). For this reason, the camera can only be used when permanently connected to the power supply.

AUTOMATIC ON/OFF CAMERA

The moment the camera detects charging, it automatically turns on and starts recording (a memory card must be inserted). When the camera is disconnected from the power supply, it stops recording video and turns off.

RADAR ALERT FUNCTION
The speed camera warning function is carried out using a database that is part of the camera firmware. The current version of the firmware for a possi-ble update is located on the website www.niceboy.eu in the support section. For the radar warning function, it is necessary to have the original cable with GPS connected to the camera and at the same time the power supply must be active. Radar alerts are accompanied by an audio signal.

GPS

The GPS module is located on the supplied USB cable. For the GPS to function properly, the module must be positioned so that it has a direct view of the sky – use the supplied sticker to attach it to the car glass. GPS function is not guaranteed in the case of a heated windshield or a coated windshield. Connect the cable with the GPS module to the camera using the USB on the camera (4) and the other part to the power supply in the car. The GPS on the camera is only functional when the power is on.

AUTOMATIC ON/OFF CAMERA
The moment the camera detects charging, it automatically turns on and starts recording (a memory card must be inserted). When the camera is disconnected from the power supply, it stops recording video and turns off.

REAR CAMERA

A rear camera (optional accessory) can be added to the Niceboy PILOT S10 camera.

• A) Lens
• B) Adhesive part
• C) Rotating part
• D) Cable

The rear camera is intended for attachment to the inner part of the car glass. Attach it using the Adhesive Part (A). The 3M sticker is used for permanent attachment (after removing and re-sticking, it will no longer hold perfectly). Adjust the angle of the camera (for the correct shot of the lens) using the rotating part (C). Glue the holder only to the inner part of the glass. Before sticking, clean the glass properly (degrease), the glass must be completely dry. Install at temperatures around 20°C. If the rear glass is heated, make sure you glue the camera mount outside of this heated part. Connect the rear camera using the cable (D) to the input (3) on the Niceboy PILOT S10 camera. The rear camera does not need to be turned on after connecting to the Niceboy PILOT S10 camera. The rear camera is powered by the main camera, it starts automatically after connecting and starts recording.

CONNECTING TO YOUR PHONE USING WIFI

Install the OnReal application (for free) on your mobile phone (in the Appsto- re for iOS and Google Play for Android). After installation, do not launch the application and follow the instructions:

1.  Turn on the camera using the power connection
2.  Open the WiFi settings on your mobile phone and connect to the camera network (name: PILOT S5 and password: 12345678). After connection, the red diode (8) will flash.
3.  After connecting the camera, start the application and follow the instructions in the application.

Warning: Before using the app in your phone settings, please enable all app permissions, turn off your mobile phone‘s „data connection“ and keep only Wi- Fi on. The application can only be installed on mobile phones with iOS version 8.0 and above and devices with Android version 10.0 and above.

CONTROLLING THE CAMERA USING THE APP

1.  Preview: shows a live preview of the camera shot
2.  Option to rotate to landscape
3.  Turn on/off the camera microphone
4.  Turns recording on/off
5.  Photo from video: allows you to create a picture from the recorded video
6.  Recorded videos: access the recorded videos on the SD card of the camera
7.  Settings: settings options

CAMERA SETTINGS USING THE APP

• Audio recording : it is possible to turn on/off the camera microphone
• Photo resolution : set the resolution for photos
• Video resolution : settings for video resolution
• Video loop: sets cyclical recording, i.e. time periods in which videos will be recorded. Exposure: exposure compensation setting.
• Timestamp: allows you to insert coordinates and time into the video
• Collision detection: setting the intensity of the G-Sensor. G-Sensor detects shocks and automatically starts emergency recording for recorded video if a collision is detected
• Time zone: allows you to change the time zone. Also suitable for changing summer and winter time
• WiFi name: allows you to change the Wi-Fi name
• WiFi password: allows you to change the password
• FW Version : Shows the firmware version of the camera
• Format : erases all data on the SD card
• Reset: clears all camera settings

GPS FUNCTION AND MAP DISPLAY

For GPS functions, it is necessary to connect the camera only with an original cable that has integrated GPS. If you want to view the record on the map, follow the instructions:

1.  connect the camera to the phone with the application (see chapter Connecting the camera to the phone using WiFi)
2.  in the app, go to Recorded Videos (6) and select videos (long press on the selected video) to download to mobile video. Download the video using the download button at the bottom of the application
3.  after the download is complete (video download status is shown in the app), disconnect from the WiFi camera with your mobile phone and co-nnect to your WiFi with internet connection or turn on data transmissions
4.  launch the application again and go to the recorded video tab (6). Here, run the video you downloaded and the video will appear along with the route on the maps

CONTENTS OF THE SALES PACKAGE

• Car camera Niceboy PILOT S10
• Power adapter with integrated GPS
• Manual

SPECIFICATIONS

• Video resolution:  4K 30fps, 2K 60fps, 1080p 60fps
• Resolution with rear camera: 4K 24fps + 1080p 24fps
• Format: MP4
• Codec: H.264
• Lens: 7G, 140°
• WiFi:  yes, 5GHz
• GPS: yes
• Supercapacitor: yes
• SD card support: microSD, UHS-U3, max. 256  GB, FAT32 format (the card is not included in the sales package)
• Rear camera support: yes (rear camera is not included in the sales package) Operating temperature: 0 °C to +50 °C
• Charging adapter: output voltage 5V, input voltage 12-24V, output current 2A
• Dimensions: 103 x 48 x 34 mm
• Weight: 90 g

The camera software and the application itself can be continuously updated. The content of the manual, including the graphic representation (pictures), may differ from device to device depending on the device software and its updates. We reserve the right to make changes to the manual and individual functions of the device and application without prior notice. Not all features of the app may be available for a specific camera model. The battery or accumulator that may be included with the product has a life of six months because it is a consumable item. Improper han-dling (prolonged charging, short circuit, breakage by another object, etc.) can lead to fires, overheating or battery leakage, for example. NICEBOY s.r.o. hereby declares that the type of radio equipment NICEBOY PILOT S10 RADAR 4K complies with Directives 2014/53 / EU, 2014/30 / EU, 2014/35 / EU, and 2011/65 / EU. The full content of EU Declaration of Conformity is available on the following websites: https://niceboy.eu/en/declaration/pilot-s10-radar-4k

DISPOSAL

USER INFORMATION FOR DISPOSING ELECTRICAL AND ELECTRONIC DEVICES (HOME USE)
This symbol located on a product or in the product’s original documentation means that the used electrical or electronic products may not be disposed together with the communal waste. In order to dispose of these products correctly, take them to a designated collection site, where they will be accepted for free. By disposing of a product in this way, you are helping to protect precious natural resources and helping to prevent any poten-tial negative impacts on the environment and human health, which could be the result of incorrect waste disposal. You may receive more detailed information from your local authority or nearest collection site. According to national regulations, fines may also be given out to anyone who disposes of this type of waste incorrectly. User information for disposing electrical and electronic devices (business and corporate use) In order to correctly dispose of electrical and electronic devices for business and corporate use, refer to the product’s manufacturer or importer. They will provide you with information regarding all disposal methods and, according to the date stated on the electrical or electronic device on the market, they will tell you who is responsible for financing the disposal of this electrical or electronic device. Infor-mation regarding disposal processes in other countries outside the EU. The symbol displayed above is only valid for countries within the European Union. For the correct disposal of electrical and electronic devices, request the relevant information from your local authorities or the device seller.

MANUFACTURER :
NICEBOY s.r.o., 5. kvetna 1746/22,
Nusle, 140 00, Prague 4, Czech Republic, ID: 294 16 876 Made in China.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>