BISSELL 1940A Power Fresh Steam Mop with Natural Sanitization User Guide
- June 14, 2024
- Bissell
Table of Contents
1940A Power Fresh Steam Mop with Natural Sanitization
User Guide
1940A Power Fresh Steam Mop with Natural Sanitization
If you are experiencing Leaking, follow these steps to resolve:
- Turn off and Unplug machine
- Remove and fill water tank
- Only water is to be used in the machine
- Do not use vinegar or any other solution as it could damage the water tank
- Inspect the cap and insert for cracks or damage
- If damaged, a new cap should be ordered
- Confirm the rubber gasket at the tip of the cap is still attached to the machine
- Check that the x-valve is working properly
- Push up on the valve over the sink to ensure water releases out of the tank
- If damaged, the cap assembly will need to be replaced
- Replace the water tank and push down securely so there are no gaps
- Has this resolved the issue?
- Yes > Great! Glad we could get you back to cleaning!
My PowerFresh® Steam Mop Hard Floor Steam Cleaner has No Power
- Unplug machine
- Check the power cord for damage
- Is the cord damaged?
- Yes > Contact Us
- No > Plug machine in to a functioning outlet
- Try using an alternate outlet
- Steam Level should flash a blue light for 40 seconds before stopping
- When blue light is solid, push Steam Level button
- Once – Low setting
- Twice – Med setting
- Three times – High setting
- Is there a blue light when machine is plugged in?
- Yes > Great! Glad we could get you back to cleaning!
References
Read User Manual Online (PDF format)
Loading......