Nelsonic Digital AM/FM Clock Radio Instruction Guide
- June 4, 2024
- Nelsonic
Table of Contents
Nelsonic Digital AM/FM Clock Radio
Specifications
-
Display Type: Digital
-
Power Source: Battery Powered
-
Shape: Rectangular
-
Are Batteries Included: No
-
Mounting Type: Ceiling Mount, Wall Mount
-
Operation Mode: Electrical
-
Package Dimensions: 5.98 x 4.21 x 3.98 inches
-
Item Weight: 1.01 pounds
What’s in the box?
- Nelsonic Digital AM/FM Clock Radio
Descriptions
Wake up to the alarm or the radio with the Nelsonic Digital AM/FM Clock Radio’s Time Projection on the Ceiling or Wall, Dual Alarms, Simple to Read Green LED Display, Simple to Operate and Quick to Read
Features
The built-in projector can flip the time projector to show on your ceiling or wall. PROJECT THE TIME ON THE CEILING OR WALL. You can read the estimated time while standing up or when lying down in bed. The viewing angle is set using simple controls.
AM or FM radio channels are easily accessed via digital AM/FM radio. For both FM and AM, you can save up to ten stations each.
- SLEEP TO THE MUSIC: By setting the sleep timer to play for a specific period of time, you can go off to sleep while listening to the radio (5-120 minutes optional).
- SNOOZE and DUAL ALARM FUNCTION: Set two different alarms. Set two alarms, one for each day of the week and the other for the weekend, for instance. When the alarm indicator is lit on the display, it is easy to tell when the alarm is on. There is a 9-minute snooze option on this clock in case you need a little extra sleep.
- WITH “NO WORRY” BATTERY BACKUP, ELECTRIC POWERED: To power the clock radio, plug it into a typical household wall outlet. Battery Backup (needs two AAA batteries, which are not provided) this clock is powered by electricity; in the event of a power outage, the time and alarm settings are stored on a battery backup. The clock’s display won’t be illuminated while on battery backup.
Note
Products with electrical plugs are made with American consumers in mind. Because outlets and voltage vary from country to country, this device might need an adapter or converter to be used where you are travelling. Before buying, kindly verify compatibility.
Frequently Asked Questions
The display is it green?
Yes, it is red.
Can you shut off the projector?
Yes! The projector may be adjusted and turned on and off.
How do you set the time properly?
Please adhere to the instructions listed below to set the clock’s time:
• When the TIME button is pressed and held down, the hour digit will flash.
• To set the proper hour, use or button.
• When the hour advances into the PM, the PM indicator will glow.
• Releasing the TIME button will cause the minute digit to flash.
• To set the right minute, press or button. To confirm, press the TIME button.
Is it possible to mute the display? Our entire bedroom is practically lit up by it because it is so bright!
There is no way to dim the display on this clock.
Fully expanded antenna, awful local AM/FM station—any suggestions for improvement?
Please move the antenna so that you may get the specified radio channel with the best possible signal.
Is a USB port present?
No, there is no USB port on this clock.
Is it only possible to move the projector display up and down?
The projection can only be tilted forward and backward.
How does a projection clock work?
They typically employ a pair of hands and a face on a set of transparent rotating discs. Some clocks have an LCD built in to display both analogue and digital data on the projected image. Projectors used in projection clocks operate on the same optical principles as regular projectors.
How does a Nelsonic clock radio set the TIME?
The hour digit will flash if you push and hold the TIME button while the radio is off. Activate the TIME button. To change the time to the proper hour, use the SET +/- button. When the hour advances into the PM, the PM indicator will glow.
How do I stop the Nelsonic alarm?
Simply push the POWER button to end the alert. The following morning, another alarm will go off. Press the ALARM 1/2 button until the alarm indicator is no longer visible to completely turn off the alarm.
How can a projection clock be turned around?
Press the Rotate button on your clock’s top or back, depending on the type, to rotate or reverse the projection: There is an additional step if you have a Model RC-8427 that is older. Press the SNOOZE/LIGHT key first, then release it before pressing the REVERSE key.
The time on my Nelsonic watch won’t stay set.
To advance the minutes to the desired time, press and hold any K button, then let go. To switch back to standard time mode, press S2. The chosen time is now shown on your watch.
How is a digital radio clock set?
Setting the Clock Radio’s Time
Connect the clock radio’s power wire to a functional electrical outlet.
Press and hold the CLOCK button for two seconds on the clock radio.
Press and hold the CLOCK button.
To choose the hour, press the TIME SET+ or TIME SET- button.
Select CLOCK from the menu.
What’s the process of a radio alarm clock?
It resembles a typical electronic clock or watch but contains two additional parts: a circuit for decoding radio signals and an antenna for picking up radio signals. The circuit determines the correct time using the radio signals and modifies the time that is displayed on the clock or watch accordingly.
How do you program an AM/FM dual alarm clock radio from Timex?
To enter presetting mode, hold down the clock/presets button for a few seconds. In order to select the preset number you want to assign, press and hold the Hour/ + Button or Minute/ – Button (P01 – P10). In order to tune the radio to a station you want to add to a preset, press and hold the Hour/ + Button or Minute/ – Button.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>