xiaomi Mi Bluetooth Neckband Earphones Basic User Manual
- June 9, 2024
- Xiaomi
Table of Contents
xiaomi Mi Bluetooth Neckband Earphones Basic
Product Overview
Turning on
- Press and hold the power button for 3 seconds, followed by one blue flash to turn on the unit.
- The unit is ready to be paired when turned on for the first time.
Turning off
- Press and hold the power button for 3 seconds, followed by one red flash to turn off the unit.
Charging
- The indicator light turns red when charging, and goes off when fully charged. When turned on, the unit will reboot when you charge it.
Connecting
- Connecting to a new Bluetooth device
When turned off, press and hold the power button for 3 seconds, followed by blue light flashing, and the unit is ready to be connected. Turn on the Bluetooth feature on your phone and locate “Mi Bluetooth Neckband Earphones Basic”. If your phone prompts for a password, enter “0000”, and the indicator turns blue breath light.
Reconnecting
- After being turned on, the unit will reconnect to the last paired device. If there’s no prior connection history, or that it fails to reconnect to any device, the unit will enter standby mode and wait for a connection.
Clearing Connection History
- When turned on, press and hold both Volume + and Volume – buttons for 5 seconds to clear all connection history. Then the unit enters standby mode and waits for a connection.
Connection Lost
- When your phone turns off the Bluetooth feature or is out of wireless range, the unit will enter standby mode. If the connection is not restored within 5 minutes, the unit will turn off automatically.
Functions
Note
- Power and volume display: iOS support, may not support other devices.
- Do not use power bank to charge Mi Bluetooth Neckband Earphones Basic.
Specifications
- Model: LYXQEJ02JY
- Input: 5 V 1.0 A
- Weight: 35 g
- Wireless range: 10 m
- Wireless connectivity: Bluetooth 4.2
- Bluetooth profiles: HFP/HSP/A2DP/AVRCP
- Charging time: 50 minutes
- Playback time: 7 h
- Charging port: Micro-USB
- Dimensions: 198 × 170 × 38 mm
WEEE
- Electrical and electronic equipment, parts and batteries marked with this symbol must not be disposed of with normal household wastage, it must be collected and disposed of separately to protect the environment.
- Your Tiinlab retailer will advise you of the correct way of disposal in your country.
CE
- Hereby, Tiinlab, declares that this equipment is in compliance with the applicable Directives and European Norms, and amendments. The full text of the EU declaration of conformity is available at the following internet address: https://www.mi.com/en/service/support/declaration.html
Safety Caution
- Do not expose batteries or battery packs to excessive heat such as sunshine, fire or the like.
FCC STATEMENT
FCC ID: 2AN5MLYXQEJ02JY Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter
Manufactured
- Xiaomi Communications Co., Ltd.
- Manufactured by: TiinLab Acoustic Technology (Shenzhen) Co., Ltd. (a Mi Ecosystem company)
- For further information, please go to www.mi.com
- For warranty information, please visit mi.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>