RS2 Plus Riley Scooters User Manual

RS2 Plus Riley Scooters User Manual

Thank you for choosing a Riley Scooter. We are a British start-up with an ambitious vision. Your electric ride truly makes a difference.

With increasing urban traffic and environmental issues throughout the world, you are supporting us to achieve our mission of providing “a viable way forward for smarter, cleaner cities”.

Riley Scooters is reinventing urban transportation leading to a positive environmental difference in the world through our all-electric scooter revolution.

Whilst the e-scooter may be just a pleasure ride for some, it’s the modern way of transport. We hope this e-scooter brings you as much satisfaction riding it, as it did for us creating it.

Contribute to our mission by sharing images and videos of your rides using the hashtag #riIeyscooters. Together, let’s lead the way forward for modern urban transport creating a clean and sustainable future for all.

Declaration of conformity

About the manual

For your driving safety, please read this user manual carefully before using the e-scooter.

Please note “warnings” and “tips” in this manual.

Warnings: improper operation may result in personal injury.

Tips: Helpful advice for the usage of the e-scooter.

Should you have any queries, please contact our customer support team via our website (rileyscooters.com).

Tips:
The manufacturer recommends riders be 14+ years old.

People without experience, or with impaired physical ability should learn to ride with a competent rider.

Children should only clean and maintain the e-scooter under adult supervision.

WARNING

Improper use of the e-scooter and/or failure to read this user manual may lead to serious bodily injury. Riley Scooters will take no responsibility for any injuries caused by improper use .

WARNING

Note: it is important to pump the tyres up to 35 P.S.I (2.41 Bar) for your own safety and optimal riding quality.

1. Safety notes

1.1 About safety
There are risks involved with riding an e-scooter. For your safety, please learn to ride safely and obey the local rules/laws.

Please check the tyres for damage and that fixings are tight before riding. Please contact your local distributor for any safety queries.

Please do not do anything that may harm other people or their property with the e-scooter.

Any conversion of the e-scooter is prohibited as it will change its performance or damage the structure, which may cause serious injury.

Please do not submerge the e-scooter into water, which will not only damage the e-scooter, but also cause a safety risk.

1.2 Safety precautions
Please note that you may lose balance, or fall over when you ride an e-scooter. To avoid injury, you should familiarise yourself with this manual and keep the e-scooter in good condition.

2. Product information

2.1 Overall view

2.2 Operation of buttons

Power Switch:
A. Press and hold the power button to turn on/off.
B. Press the power button twice to turn the headlights on/off.
The tail lights are always on.

Function button:
Press function key to switch riding modes.

Beginner mode (10km/h limit) Gear indicator is not displayed.

Normal mode (15/h limit) Gear indicator shows white.

Sports mode (25km/h limit Gear indicator shows red.

Throttle: Press down the throttle button to accelerate.

Brake: Apply pressure to the brake lever to brake. Lightly step on the rear fender to assist the brakes.

Cruise mode: Maintain a set speed for 6 seconds to enter the cruise mode. Exit the cruise mode by pressing down the throttle again, or by braking.

Indicator: Press Left or right arrow once to turn indicator on, press again to turn off. Both can be turned on as hazard lights, press each separately to turn on or off.

2.3 Assembly instructions

2.4. Folding instructions

2.5 Uninstall/Install the battery

Uninstall

3. How to ride the e-scooter

4. Battery instruction

The instructions show you how to charge and maintain the battery and provide some safety notices and the technical specifications.
Please use the battery properly according to these instructions to prolong battery life and performance.

4.1 Battery parameters

4.2 Battery safety
Do not disassemble the battery.
In the unlikely event that there is a leak in the battery or it overheats, do not use or charge it and contact us.

Do not let children touch the battery. Always unplug the charger before installing the battery or riding.

If you want the e-scooter to run most efficiently, the battery must be charged and used within the temperature range indicated in the battery parameters.

Lithium ion batteries are considered dangerous and require local law to allow transportation.

The battery contains dangerous substances. Please do not open the battery. Do not insert anything into the battery.
NEVER throw batteries away in general rubbish. Take the exhausted battery to a state approved battery recycle centre.
Call your waste collection service to find out if they offer disposal of batteries.
Do not charge the battery at high temperature or charge the battery in a high temperature environment.
Only use the original charging equipment to charge the e-scooter.

Tips:
Connect the charger to the AC power first, then connect it to the battery.

After charging, cover with the dustproof rubber to prevent anything from entering the charging port and causing battery failure.

5. Specification

6. Maintenance

Maintenance
Make sure the e-scooter charger and charging cord are disconnected and ensure that the e-scooter is off.

Check the brake system and tyres at least once a month because they are sensitive parts.

If braking performance and tyre grip are impaired, contact your local dealer or Riley Support to purchase replacement parts.

Wipe the shell with a soft damp cloth to clean the e-scooter. It is important to clean the e-scooter regularly to minimize the buildup of dust and dirt which may impact the performance of the e-scooter.

WARNING

Do not clean the e-scooter with a jet wash or by soaking in water. This will cause permanent damage.

Storage
Please charge your e-scooter before you store. Please ensure this is done at least once every three months.

If the storage temperature is lower than 0°C, please don’t charge the e-scooter. Please keep the e-scooter in a suitable place indoors, keep dry and at the appropriate temperature.

WARNING

In order to protect the user’s safety, do not take the e-scooter apart, otherwise the warranty of the product will be invalid.

7. Troubleshooting

Please contact us for a repair or if there are any issues with the e-scooter. For contact details please see the Limited Warranty Document.

Tips:

8. What’s included

E-scooter packing list:

• 1 x E-scooter
• 1 x Battery
• 1 x Charger
• 1 x Manual
• 1 x Set of screws and Allen key
• 1 x Copy of Manufacturer’s Limited Warranty

Please contact us if the product is broken or if anything is missing when you open the package. We will replace it for you as soon as possible.

9. Riley Scooter APP

Stay on the move with our app which connects directly to your scooter through Bluetooth. Get directions, view key riding info, and track your rides effortlessly.

Scan to download the App. Alternatively, go to Google Play Store (Android) or the Apple App Store (iOS) and search Riley Scooters to download and install the App.

Be advised there is a minimum Android/ iOS/Bluetooth version required. See user materials for additional details.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>