RILEY SCOOTERS RS1 Plus Electric Scooter User Manual

: June 14, 2024
: RILEY SCOOTERS

RS1 Plus Electric Scooter

Product Information

Specifications

Brand: Riley Scooters
Model: RS1 Plus
Type of Device: Electric Scooter
Manufacturer: Riley Scooters Limited
Address: Kings Lodge, London Road, Sevenoaks, TN15 6AR, United
Kingdom
Conformity Declarations: 2011/65/EU amended by 2015/863(EU),
2014/30/EU, 2014/35/EU, 2006/42/EC, 2014/53/EU
Directives Complied: RoHS Directive, EMC Directive, Low Voltage
Directive, Machinery Directive, RED DIRECTIVE

About the Manual

For your driving safety, please read this user manual carefully
before using the e-scooter. This manual provides important
information on how to use the RS1 Plus electric scooter safely and
effectively.

Tips

The manufacturer recommends riders be 14+ years old.
People without experience or with impaired physical ability
should learn to ride with a competent rider.
Children should only clean and maintain the e-scooter under
adult supervision.
Improper use of the e-scooter and/or failure to read this user
manual may lead to serious bodily injury. Riley Scooters will take
no responsibility for any injuries caused by improper use.
Note: it is important to pump the tyres up to 35 P.S.I (2.41
Bar) for your own safety and optimal riding quality.

Product Usage Instructions

1. Safety Notes

1.1 About Safety

Riding an e-scooter involves certain risks. To ensure your
safety, it is important to learn to ride safely and obey the local
rules and laws governing e-scooter usage.

1.2 Safety Precautions

Before riding, always check the tyres for any damage and ensure
all fixings are tight. If you have any safety queries, contact your
local distributor.
Familiarize yourself with this manual and keep the e-scooter in
good condition to avoid losing balance or falling over, which can
result in injury.
Do not use the e-scooter in a way that may harm other people or
their property.
Prohibited activities include any conversion of the e-scooter
that may change its performance or damage its structure, as this
can cause serious injury.
Prior to riding, take necessary safety measures such as wearing
sportswear, a helmet, knee pads, and elbow pads.
Do not submerge the e-scooter in water as it can cause damage
and pose a safety risk.

2. How to Ride the E-Scooter

Follow these instructions to ride the RS1 Plus electric
scooter:

Ensure the e-scooter is fully charged before use.
Stand on the scooter with one foot on the deck and push off
with the other foot to start moving.
Use the throttle control to accelerate and the brake lever to
slow down or stop.
Always maintain a stable and balanced posture while
riding.
Observe traffic rules and regulations, and be aware of your
surroundings.
When finished riding, turn off the scooter and safely
dismount.

3. Battery Instruction

Here are some important instructions regarding the battery of
the RS1 Plus electric scooter:

Charge the battery using the provided charger only.
Ensure the charging port is dry and clean before connecting the
charger.
Do not expose the battery to extreme temperatures or direct
sunlight.
If not using the e-scooter for an extended period, disconnect
the battery and store it in a cool, dry place.
If you notice any abnormalities or issues with the battery,
contact customer support for assistance.

Frequently Asked Questions (FAQ)

Q: What is the recommended age for riders?

A: The manufacturer recommends riders to be 14+ years old.

Q: Can children clean and maintain the e-scooter?

A: Children should only clean and maintain the e-scooter under
adult supervision.

Q: What happens if I do not read the user manual or misuse the

e-scooter?

A: Failure to read the user manual or improper use of the
e-scooter may lead to serious bodily injury. Riley Scooters will
not be responsible for any injuries caused by improper use.

Q: What is the recommended tire pressure for optimal riding

quality?

A: It is important to pump the tires up to 35 P.S.I (2.41 Bar)
for your own safety and optimal riding quality.

Q: Can the e-scooter be submerged in water?

A: No, submerging the e-scooter in water can cause damage and
pose a safety risk.

RS1 Plus User Manual

RS1 Plus
1

Riley Scooters
Thank you for choosing a Riley Scooter. We are a British start-up with an ambitious vision. Your electric ride truly makes a difference. With increasing urban traffic and environmental issues throughout the world, you are supporting us to achieve our mission of providing “a viable way forward for smarter, cleaner cities”. Riley Scooters is reinventing urban transportation leading to a positive environmental difference in the world through our all- electric scooter revolution. Whilst the e-scooter may be just a pleasure ride for some, it’s the modern way of transport. We hope this e-scooter brings you as much satisfaction riding it, as it did for us creating it. Contribute to our mission by sharing images and videos of your rides using the hashtag

riIeyscooters. Together, let’s lead the way forward for modern urban

transport creating a clean and sustainable future for all.
Hayden Riley
Founder & CEO
Proudly British
2

Declaration of conformity

Riley Scooters Limited: Kings Lodge, London Road, Sevenoaks, TN15 6AR, United Kingdom
This declaration of conformity is issued under the sole responsibility of the manufacturer.

Object of the declaration: Type of Device: Electric scooter Model NO: RS1 Plus Description: RILEY SCOOTER RS1 Plus

The object of the declaration described above is in conformity with the relevant Union harmonisation legislation:

2011/65/EU amended by 2015/863(EU) 2014/30/EU 2014/35/EU 2006/42/EC 2014/53/EU

RoHS Directive EMC Directive Low Voltage Directive Machinery Directive RED DIRECTIVE

3

References to the relevant harmonize standards used or references to other technical specification in relation to which conformity is declared: BS EN 17128:2020 EN 17128:2020 EN 60335-1:2012 EN 60335-2-29:2004 EN IEC 55014-1:2021 EN IEC 55014-2:2021 EN 61558-1:2005 EN 61558-2-16:2009 PT 55014-1:2021 EN 55014-2:2015 EN 61000-3-2:2019+A1:2021 EN 61000-3-3:2013+A1:2019 Name of manufacturer: RILEY SCOOTERS LIMITED Address: Kings Lodge, London Road, Sevenoaks, TN15 6AR, United Kingdom Importer/Distributor contact detail:
www.rileyscooters.com
AUTHORISED SIGNATURE: Hayden Riley Founder & CEO Date: 2022-10-28
4

About the manual

For your driving safety, please read this user manual carefully before using the e-scooter.
Please note “warnings” and “tips” in this manual.
Warnings: improper operation may result in personal injury.
Tips: Helpful advice for the usage of the e-scooter.
Should you have any queries, please contact our customer support team via our website (rileyscooters.com).

Tips:
The manufacturer recommends riders be 14+ years old.
People without experience, or with impaired physical ability should learn to ride with a competent rider.
Children should only clean and maintain the e-scooter under adult supervision.

Improper use of the e-scooter and/or failure to read this user manual may lead to serious bodily injury. Riley Scooters will take no responsibility for any injuries caused by improper use .

Note: it is important to pump the tyres up to 35 P.S.I (2.41 Bar) for your own safety and optimal riding quality.
5

Contents
1. Safety notes ………………………………………………………………………. 7-9 1.1 About safety……………………………………………………………………………… 7 1.2 Safety precautions ……………………………………………………………….. 7-9
2. Product Information ……………………………………………………….. 10-14 2.1 Overall view ……………………………………………………………………………… 10 2.2 Operation of buttons ……………………………………………………………… 11 2.3 Assembly instructions …………………………………………………………… 12 2.4 Folding instructions……………………………………………………………….. 13 2.5 Uninstall/install the battery ………………………………………………….. 14
3. How to ride the e-scooter………………………………………………….15-16 4. Battery instruction …………………………………………………………….17-19
4.1 Battery parameters………………………………………………………………… 17 4.2 Battery safety ………………………………………………………………………….. 18 4.3 Charging instructions……………………………………………………………… 19 5. Specifications ……………………………………………………………………… 20 6. Maintenance …………………………………………………………………………. 21 7. Troubleshooting ………………………………………………………………….. 22 8. What’s included…………………………………………………………………… 23 9. Riley Scooter App ……………………………………………………………….. 24
6

1. Safety notes

1.1 About safety

1.2 Safety precautions

There are risks involved with riding an e-scooter. For your safety, please learn to ride safely and obey the local rules/laws.
Please check the tyres for damage and that fixings are tight before riding. Please contact your local distributor for any safety queries.

Please note that you may lose balance, or fall over when you ride an e-scooter. To avoid injury, you should familiarise yourself with this manual and keep the e-scooter in good condition.

Please do not do anything that may harm other people or their property with the e-scooter.
Any conversion of the e-scooter is prohibited as it will change its performance or damage the structure, which may cause serious injury.

Safety measures should be taken before riding, e.g. wear sportswear, helmet, knee pads and elbow pads.

Please do not submerge the e-scooter into water, which will not only damage the e-scooter, but also cause a safety risk.

Take caution when riding in the rain.
7

DO NOT ride with loading. DO NOT ride with more than one rider.

DO NOT ride if you are pregnant.

Max Load: 120 kg.

DO NOT ride after drinking alcohol or taking medicine.
8

2. Product information
2.1 Overall view

DO NOT listen to music when you ride the e-scooter.

Be careful of uneven, loose or slippery surfaces. Avoid slopes, stairs and poorly lit areas.

DO NOT use in dangerous areas, where there is a risk from flammable materials.
9

Accelerator/Throttle Handle Brake lever Headlight
Folding button Folding spanner Anti-slip mat Motor

Indicator switch LED Display
Indicator light Hook
Battery clip Detachable battery
Charging port Fender
Fender clip Tail lights
Number plate Disc brake Stand
10

2.2 Operation of buttons

Brake lever
Indicator light Indicator switch

Function button

Fault display

Power switch Throttle button

Power

Speed Multifunction
Gear Unit display

LED display

Power Switch: A. Press and hold the power button to turn on/off.
B. Press the power button twice to turn the headlights on/off. The tail lights are always on.

Throttle: Press down the throttle button to accelerate.
Brake: Apply pressure to the brake lever to brake. Lightly step on the rear fender to assist the brakes.

Function button: Press function key to switch riding modes.
Beginner mode (10km/h limit) Gear indicator is not displayed.
Normal mode (15/h limit) Gear indicator shows white.
Sports mode (25km/h limit) Gear indicator shows red.

Cruise mode: Maintain a set speed for 6 seconds to enter the cruise mode. Exit the cruise mode by pressing down the throttle again, or by braking.
Indicator: Press Left or right arrow once to turn indicator on, press again to turn off. Both can be turned on as hazard lights, press each separately to turn on or off.

11

2.3 Assembly instructions

1. Pull up the stem towards the front wheel.

2. Fold clip in firmly, ensuring it clicks and button is tight.

3. Secure the two wires together inside the stem.

4. Attach headset to the stem, then screw in 2 screws each side using the Allen key provided.

Note: If the mechanism becomes loose, tighten the screw accordingly.

12

2.4. Folding instructions

1. Push/slide the button up.

2. Pull the clip firmly away from the stem, while pushing the stem down.

3. Fold the stem towards the rear.

4. Align the hook with the fender clip on the rear fender and press down till it clicks.

13

2.5 Uninstall/Install the battery Uninstall

1. Push battery clip in and hold.

2. Push the battery up, away from the bottom of the stem.
Install

3. After pushing the battery up, pull it out horizontally.

1. Insert the battery horizontally into the pole, while pushing the battery clip in.

2. When in, let go of the battery clip, and push the battery down until firmly secure.

14

3. How to ride the e-scooter

Wear a helmet, knee pads and elbow pads when you learn to ride the e-scooter.

1. Press the POWER button for two seconds.

4. Press the THROTTLE slightly with your right hand to start and rotate the handlebars to turn.

5. Continuously press the throttle to speed up.

2. Put one foot on the base plate and push off the ground with your strong leg.

3. Balance both feet on your e-scooter when you have enough momentum.

15

6. Apply pressure to the brake lever to slow down or stop.

7. When the e-scooter stops or runs at a slow speed, you can get off.

16

4. Battery instruction

The instructions show you how to charge and maintain the battery and provide some safety notices and the technical specifications. Please use the battery properly according to these instructions to prolong battery life and performance.

4.1 Battery parameters
Name

Parameter

Type

Li-ion battery

Charging time

Approx. 3 hours

Voltage

36V

Working temperature

0°C – 35°C

Charging temperature

0°C – 35°C

Max Charging Voltage

42V

Storage Time (at -10°C – 40°C) 3 months (full charge)

Initial Volume

5.8 AH

Max Charging Current

1.5/2A (check charger label)

4.2 Battery safety
Do not disassemble the battery.
In the unlikely event that there is a leak in the battery or it overheats, do not use or charge it and contact us.
Do not let children touch the battery. Always unplug the charger before installing the battery or riding.
If you want the e-scooter to run most efficiently, the battery must be charged and used within the temperature range indicated in the battery parameters.

The battery contains dangerous substances. Please do not open the battery. Do not insert anything into the battery.
NEVER throw batteries away in general rubbish. Take the exhausted battery to a state approved battery recycle centre. Call your waste collection service to find out if they offer disposal of batteries.
Do not charge the battery at high temperature or charge the battery in a high temperature environment.

Lithium ion batteries are considered dangerous and require local law to allow transportation.

Only use the original charging equipment to charge the e-scooter.

17

18

4.3 Charging instructions
Open the charging port cover, make sure the charging port is clean and dry.

Connect the charger to the battery and the plug to a power source (100V-240V; 50/60Hz). Make sure the charging light is on.

When the charger indicator is green, charging is complete.

Charging method 1:

Charging method 2:

Charging port

Battery connector
Charging port

Tips:
Connect the charger to the AC power first, then connect it to the battery.
After charging, cover with the dustproof rubber to prevent anything from entering the charging port and causing battery failure.
19

5. Specification
Product

Scooter Specification

Unfolded size

1131x450x1179mm

Folded size

1131x450x475mm

Height from baseplate to ground 115mm

Net weight Tyre Size Tyre pressure

15kg
10 inch pneumatic air tyre with inner tube
35 P.S.I. (2.41 Bar)

Waterproof level

IPX4

Basic Information

Battery Capacity

36V/5.8AH

Motor power

350W

Mileage per charge

15.5 miles (25km)

Max speed

15.5 mph (25km/h)

Max loading

120kg

Climbing angle

15°

Driving modes

3 (beginner, eco, sport) Charger Specification

Input voltage

100-240V

Frequency

50-60Hz

Output voltage

42V

Output current

1.5A

Store temperature

-10°C – 35°C

20

6. Maintenance

Maintenance

Storage

Make sure the e-scooter charger and charging cord are disconnected and ensure that the e-scooter is off.

Please charge your e-scooter before you store. Please ensure this is done at least once every three months.

Check the brake system and tyres at least once a month because they are sensitive parts. If braking performance and tyre grip are impaired, contact your local dealer or Riley Support to purchase replacement parts.

If the storage temperature is lower than 0°C, please don’t charge the e-scooter. Please keep the e-scooter in a suitable place indoors, keep dry and at the appropriate temperature.

Wipe the shell with a soft damp cloth to clean the e-scooter. It is important to clean the e-scooter regularly to minimize the buildup of dust and dirt which may impact the performance of the e-scooter.

In order to protect the user’s safety, do not take the e-scooter apart, otherwise the warranty of the product will be invalid.

Do not clean the e-scooter with a jet wash or by soaking in water. This will cause permanent damage.

21

7. Troubleshooting

Please contact us for a repair or if there are any issues with the e-scooter. For contact details please see the Limited Warranty Document.
Tips:

Potential problem

Solution

Unable to start up Does not charge

Check to see if the battery is charged.
1. Check whether the plugboard has electricity.
2. Check the charger to see whether the AC plug is connected (whether the light is on.)
3. Check the plug of the charger and the charging port of the e-scooter have been inserted correctly.

22

8. What’s included
E-scooter packing list: 1 x E-scooter 1 x Battery 1 x Charger 1 x Manual 1 x Set of screws and Allen key 1 x Copy of Manufacturer’s Limited Warranty Please contact us if the product is broken or if anything is missing when you open the package. We will replace it for you as soon as possible.

9. Riley Scooter APP

Stay on the move with our app which connects directly to your scooter through Bluetooth. Get directions, view key riding info, and track your rides effortlessly.

Features:
· Cockpit showing key riding info · Lock and trace your scooter · Track your rides · Shop our range of accessories

Note: When connecting to your scooter ensure your Bluetooth is enabled on your mobile device and the scooter is turned on.

Scan to download the App. Alternatively, go to Google Play Store (Android) or the Apple App Store (iOS) and search Riley Scooters to download and install the App.
Be advised there is a minimum Android/ iOS/Bluetooth version required. See user materials for additional details.

23

24