HOTO QWRJQ001 Cordless Hot Glue Gun Instruction Manual
- June 14, 2024
- HOTO
Table of Contents
HOTO QWRJQ001 Cordless Hot Glue Gun
Overview
- Read this manual carefully before use, and retain it for future reference.
- Thanks for using the HOTO Lithium Glue Gun.
- Glue gun cover
- Glue gun muzzle
- Indicator
- Power Switch
- Glue Inlet
- Trigger
- Type-C Charging Port
Instructions
- This product applies to hot glue sticks in 7mm diameter and can glue materials below plastic, wood, paper products, textiles, ceramics, glass, leather, crystal items, shells, and so on.
- Turn the product on/off
- When the product is turned off, press and hold the on/off button for 2 seconds to turn it on.
- When the product is turned on, press and hold the on/off button for 2 seconds to turn it off.
- The product will shut down automatically if there is no activity for 180 seconds.
Instructions
- When the product is turned on, insert the glue stick; When the indicator is solid white (approx.30s), then preheating is completed, pull the trigger to eject the glue.
- Put glue on items that need to be covered, push down, and wait for the glue concretion, then adhesion is done.
Charge the battery
- This product is equipped with a USB charging cable, and a Type-C charging port is included.
- Please charge the product to full if it is not used for a long time.
Indicator Status
| Indicator Status | Light Status | Product Status |
|---|---|---|
| Blinking white | Heating Status | |
| Solid white | Heating Done | |
| Blinking red | Low Battery Notification | |
| Slowly blinking red | Charging | |
| The solid red light will go out after two minutes | Fully charged |
Warm Notice
- Remove the glue gun cover before use.
- Please do not touch the glue gun muzzle with your hands when working.
- Melted glue is very high in temperature, please do not touch it with your hands directly.
Precautions
- The product is not fully charged when leaving the factory, so please charge before first use.
- The product can’t work while charging.
- On the first use, please press the trigger a few times to push the glue stick into the holder for heating and gluing.
- When an operation is done, if there is a remaining glue stick, please do not pull it out with force, in order not to damage the product.
- After a long time of inactivity, if the indicator doesn’t show correctly while charging, please charge for 20 minutes and then check it again.
- Please keep the product up straight when not in use.
- The product only works with 7mm glue sticks.
Troubleshooting
Daily Care & Maintenance
- It’s not allowed to put the product in high temperature for a long time; If it will not be used for a long period, please store it in the environment with ambient temperature and moisture, and charge the battery every half year.
- Please keep the product surface clean, and clean it with a wet soft cloth; Do not clean it with corrosive solutions.
| Fault | Cause | Solution |
|---|---|---|
| Product not work | Not power on | Turn on the switch |
| Turn off automatically | Turn on the switch | |
| No lithium battery power | Charge the battery | |
| No glue goes out | Run out of glue sticks | Add glue stick |
| Can’tinsertthe glue stick | The size of the glue sticks did not match | Replace |
glue stick
Specifications
- Model: QWRJQ001
- Rated Voltage: 4V=
- Preheating Time: approx.30s
- Glue Stick Diameter: 7mm
- Item Dimensions: 135X127X35mm
- Glue Stick Length: 125mm
- Lithium-ion Battery: 2000mAh
- Charging parameters: 5V=1A
- Charging Time: 120-180min
- Net Weight: approx.200g
- Manufactured by: Shanghai HOTO Technology Co., Ltd.
- Address: Building 45, No.50 Moganshan Road, Putuo District, Shanghai
- Stay tuned to our social media (@hoto_official)
Documents / Resources
| HOTO
QWRJQ001 Cordless Hot Glue
Gun
[pdf] Instruction Manual
QWRJQ001 Cordless Hot Glue Gun, QWRJQ001, Cordless Hot Glue Gun, Hot Glue Gun,
Glue Gun, Gun
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>