Kaibo Verse Plus Bone Conduction Bluetooth Headphone Instruction Manual
- June 14, 2024
- Kaibo
Table of Contents
Kaibo Verse Plus Bone Conduction Bluetooth Headphone
Product Structure
- Status Indicator
- Power Button
- Type-C Charging Port
- Control Bud ( Right bud)
- Microphone
- Proximity sensor
Note: All pictures in this manual are schematic diagrams which may deviate from the actual object. Please refer to the actual object.
Features
Specifications
Model No : Kaibo Verse Plus
Bluetooth Version : V5.2| Wire Range : 10 Meters / 33 Feet
Frequency Response : 100 Hz~20 KHz| Bluetooth Response : 2.402-2.480 GHz
Impedance : 80| Speaker Driver: 014.0mm BCT
Microphone Sensitivity: -40 dB±2 dB| Weight: 27.2g
Battery Capacity : 150 mAh| Battery : lithium battery
Play Time : About 8 Hours| Charging Time : About 1.5 Hours
Button Style : Button+Smart Touch| Waterproof Level : IP55
Electrical Specifications : 5V / 1A| Compatible Profiles: HFP 1. 7,HSP 1.
2, A2DP 1. 3, AVRCP 1. 6
APP Related
- Open the App Store, search for Kaibo Audio Connect1, and select from three preset equalizers to choose the right sound performance according to your preference and environment.
- In addition to the three equalization modes: Acoustic, Sport, and Manual you can also check the remaining power and update the firmware.
- Please refer to the instructions on the official website to update the firmware and reboot the headphones after the update is completed.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
Official website : www.kaiboaudio.com