KAIDI KDDYM002B Plus Control Box Owner’s Manual
- September 25, 2024
- KAIDI
Table of Contents
KAIDI KDDYM002B Plus Control Box
Specifications:
- Model: KDDYM002B+ KDH144+
- Functions: Head push rod lift, Leg push rod lift, Zero location, FLAT, Child lock function, Memory keys, Head shock motor, Leg shock motor, TIMER/ALL OFF
- Memory: Each memory key can remember 1 group of positions
- Vibration Motor: Three gears for enhancement and decrease
- Child Lock Function: Locks control box to prevent accidental operation
Product Usage Instructions
System Connection Diagram
Refer to the system connection diagram in the user manual for proper setup.
Manual Key Function Description:
Hand Controller 1:
- Head Push Rod Lift: Press K1 to extend push rod, and press K5 to retract it.
- Leg Push Rod Lift: Press K3 to extend push rod, and press K6 to retract it.
- Zero Location: Long press K2 to set a memory position; short press K2 to run to the memory position.
- FLAT: Long press K4 to retract leg and back push rod.
Hand Controller 2:
- Child Lock Function: Press and hold K7 to enable/disable child lock.
- Memory Keys: Use K8 and K9 to run to memory positions, and hold K10 to save the current position.
- Head Shock Motor: Use K11 to adjust vibration intensity.
- Leg Shock Motor: Use K13 to adjust vibration intensity.
- Timer Control: Use K15 for timing settings.
FAQ:
-
Q: How many groups of positions can each memory key remember?
A: Each memory key can remember 1 group of positions. -
Q: How to enable the child lock function?
A: Press and hold K7 for 3 seconds until the background light flashes quickly, indicating the child lock is activated.
System connection diagram
Manual key function description
Hand controller 1 function:
Number
| Name| function|
comment
---|---|---|---
1| Head push rod lift| Press K1, push rod out, release stop;
Press K5, push rod to retract, release stop;
|
2| Leg push rod lift| Press K3, push rod out, release stop;
Press K6, push rod to retract, release stop;
|
3| Zero location| Long press K2, about 3 seconds after the control box buzzer
rings, the control box memory of the current position of the push rod;
Short press K2, push rod run to the key memory position;
| Each memory key can only remember 1 group of positions, if the memory function is performed again, the key’s last memory position will be updated to the new memory position;
Press any key during the operation of the push rod to stop the operation;
The memory location will not be cleared after power-on.
Manual controller 1 and manual controller 2 do not interfere with the memory position.
4| FLAT| Long press K4, 1S after the leg and back push rod back release, and
stop;|
---|---|---|---
5| Child lock function| K7 Press and hold for 3s, the background light flashes
quickly for 3 seconds, and the supporting control box beeps 1 time, the child
lock function is turned on, at this time, pressing any key is invalid and the
backlight flashes twice. If you press and hold for 3s again, the background
light flashes quickly for 3 seconds, and the supporting control box beeps 1
time, the child lock function is turned off, and the handset is used
normally;|
6| A memory key| Short press the K8 putter to run to the memory position;|
7| B memory key| Short press the K9 putter to run to the memory position;|
8| Memorize the setting key.| Press and hold K10,3 seconds, the background
light flashes fast for 3 seconds and then stays on, press the A button or B
button to remember the current position (overwrite the previous memory); At
the same time, the supporting control box beeps 1 time, the background light
is off;| Each memory key can only remember 1 group of positions, if the memory
function is performed again, the key’s last memory position will be updated to
the new memory position;
Press any key during the operation of the push rod to stop the operation;
The memory location will not be cleared after power-on.
Manual controller 1 and manual controller 2 do not interfere with the memory position.
---|---|---|---
9| The head shock motor is turned on and off| Short press the K11 head
vibration motor gear enhancement (a total of three gears), each press
gradually increases; Short press the K12 head vibration motor gear to decrease
(a total of three gears), and gradually decrease each time you press;|
10| The leg shock motor turns on and off.| Short press the K13 foot vibration
motor gear enhancement (a total of three gears), and each press gradually
increases; Short press the K14 foot vibration motor gear to decrease (a total
of three gears), and gradually decrease each time you press;|
---|---|---|---
11| TIMER/ALL OFF| Short press the K15 button to switch the timing time, and
the corresponding indicator lights up after selecting the timing time. Press
and hold the button K15 for three seconds, and the vibration motor will turn
off;|
12| Strip light| The light strip lights up red after the first short press on
K16, the light strip lights up warm yellow after the second short press K16,
the light strip lights up blue after the third short press K16, and the fourth
short press on K16 turns off;|
Hand controller 2 functions:
Number
| Name| function|
comment
---|---|---|---
1| Head push rod lift| Press K1, push rod out, release stop;
Press K5, push rod retract, release stop;
|
2| Leg push rod lift| Press K3, push rod out, release stop;
Press K6, push rod retract, release stop;
|
3| Zero location| Long press K2, about 3 seconds after the control box buzzer
rings, the control box memory of the current position of the push rod;
Short press K2, push rod run to the key memory position;
| Each memory key can only remember 1 group of positions, if the memory function is performed again, the key’s last memory position will be updated to the new memory position;
Press any key during the operation of the push rod to stop the operation;
The memory location will not be cleared after power-on.
Manual controller 1 and manual controller 2 do not interfere with the memory position.
4| FLAT| Long press K4, 1S after the leg and back push rod release and stop;|
---|---|---|---
5| Child lock function| K7 Press and hold for 3s, the background light flashes
quickly for 3 seconds, and the supporting control box beeps 1 time, the child
lock function is turned on, at this time, pressing any key is invalid and the
backlight flashes twice. If you press and hold for 3s again, the background
light flashes quickly for 3 seconds, and the supporting control box beeps 1
time, the child lock function is turned off, and the handset is used
normally;|
6| A memory key| Short press the K8 putter to run to the memory position;|
7| B memory key| Short press the K9 putter to run to the memory position;|
8| Memorize the setting key.| Press and hold K10,3 seconds, the background
light flashes fast for 3 seconds and then stays on, press the A button or B
button to remember the current position (overwrite the previous memory); At
the same time, the supporting control box beeps 1 time, the background light
is off;| Each memory key can only remember 1 group of positions, if the memory
function is performed again, the key’s last memory position will be updated to
the new memory position;
Press any key during the operation of the push rod to stop the operation;
The memory location will not be cleared after power-on.
Manual controller 1 and manual controller 2 do not interfere with the memory position.
---|---|---|---
9| The head shock motor is turned on and off| Short press the K11 head
vibration motor gear enhancement (a total of three gears), each press
gradually increases; Short press the K12 head vibration motor gear to decrease
(a total of three gears), and gradually decrease each time you press;|
10| The leg shock motor turns on and off.| Short press the K13 foot vibration
motor gear enhancement (a total of three gears), and each press gradually
increases; Short press the K14 foot vibration motor gear to decrease (a total
of three gears), and gradually decrease each time you press;|
---|---|---|---
11| TIMER/ALL OFF| Short press the K15 button to switch the timing time, and
the corresponding indicator lights up after selecting the timing time. Press
and hold the button K15 for three seconds, and the vibration motor will turn
off;|
12| Strip light| The light strip lights up red after the first short press on
K16, the light strip lights up warm yellow after the second short press K16,
the light strip lights up blue after the third short press K16, and the fourth
short press on K16 turns off;|
Pairing/unpairing methods
function button
| definition| operating mode|
comment
---|---|---|---
Pair| The manual is paired with the control box| Pairing method: Long press
the pairing button of the control box for 3 seconds, and the control box will
enter the pairing state
Pairing duration: The pairing key blinks for 15 seconds
Pairing action: During the manual control press the head rise button and leg rise button, and keep 3S
Successful pairing performance: the control box buzzes once, and the pairing key stops blinking;
| Method 1
Pairing method: 5 seconds after powering off the control box, power it on
again, and the control box enters the pairing state;
Pairing duration: The pairing button starts blinking for 15S
Pairing action: Press the head rise button and leg rise button by the hand controller for 3S during this period
Successful pairing performance: the control box buzzes once, and the pairing key stops blinking;
| Method 2
Clear pair| Unpair the manual with the control box| Unpairing method: Long
press the pairing button of the control box for 3 seconds, and the control box
will enter the pairing state
Unpairing duration: The pairing button starts blinking for 15S
Cancel the pairing action: press the head down and leg down buttons during the manual control, and hold for 3S
Cancel the pairing success performance: the pairing key of the control box stops blinking, pressing any key of the manual controller is invalid
| Method 1
Unpairing method: Power on the control box again after the power is
disconnected for 5 seconds. The control box enters the pairing state.
Unpairing duration: The pairing button starts blinking for 15S
Cancel the pairing action: press the head down and leg down buttons during the manual control, and hold for 3S
Cancel the pairing success performance: the pairing key of the control box stops blinking, pressing any key of the manual controller is invalid
| Method 2
Factory data reset| The control box restores factory Settings (including
preset positions)| Recovery method: Press and hold the pairing button of the
control box for 3 seconds to enter the pairing state
Recovery duration: The pair key starts blinking for 15 seconds
Recovery action: During the manual control press the head up button and leg down button, hold for 3S
Successful recovery performance: the control box buzzes once, and the pairing key stops blinking;
| Method 1
---|---|---|---
Recovery method: After the power supply of the control box is disconnected for
5 seconds, power on the control box again, and the control box enters the
pairing state
Recovery time: The pairing button starts blinking for 15S
Recovery action: During the manual control press the head up button and leg down button, hold for 3S
Successful recovery performance: the control box buzzes once, and the pairing key stops blinking;
| Method 2
Comment:
- Manual controller 1 and manual controller 2 have the same method of pairing, unpairing, and restoring factory Settings;
- After the pairing of manual controller 1 is completed, it enters the pairing state again, and pairs manual controller 2.
- When only one hand controller is paired, only the functions on the hand controller are performed.
- After the pairing is successful, the control box is powered off and re-powered, the original pair will not be cleared, and the paired manual controller can still be used;
- At the same time, only one manual controller can work, and after the manual controller 1s hibernation, the other manual controller can work;
- Push rod (Head) and (leg), when the push rod rises to the maximum stroke, the error before the two push rods is controlled within 2mm;
- A control box supports a maximum of two controllers for pairing, when there is a third controller for pairing, the first controller pairing information will be squeezed out, and so on;
- Restore factory Settings: When manual 1 is used to restore factory Settings, the head push rod and leg push rod corresponding to manual 1 retract to the end and stop, the pairing of manual 1 will not be cleared, the memory position of manual 1 is cleared, and the same is true for manual 2;
Matters need attention
- Before use, please be sure to correctly connect according to the system connection diagram, and then switch on the main power supply;
- Children, the elderly, and the disabled, please use under supervision;
- Do not insert or remove any cable when the power is on. This may cause operation failure. In this case, disconnect the main power supply and reconnect it in about 30 seconds.
- Before using it for the first time, the wireless manual controller should be paired with the control box. For specific methods, see Manual pairing/unpairing method;
- Please replace the manual battery in time. Take out the battery if it is not used for a long time.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note:
The Grantee is not responsible for any changes or modifications not
expressly approved by the party responsible for compliance. such modifications
could void the user’s authority to operate the equipment.
FCC Warning for handset
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, under part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used by the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note:
The Grantee is not responsible for any changes or modifications not expressly
approved by the party responsible for compliance. Such modifications could
void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirements.