ALPEN OPTICS 260, 261 Magnaview Binoculars Instructions

ALPEN OPTICS 260, 261 Magnaview Binoculars

MAGNAVIEW BINOCULARS INSTRUCTIONS

Parts

1. Ocular Lens
2. Center Focus
3. Rubber Eyecup
4. Diopter
5. Strap Attachment
6. Objective Lens
7. Tripod Adapter Socket

WARNING:  Never look directly at the sun with this device.

Eyecup Adjustment

Drawing may not match binocular model.

Your ALPEN binocular is fitted with eyecups which can be rolled or twisted up or down (depending on your model) to optimize the view for your eyes and to exclude extraneous light. If you are not wearing eyeglasses or sunglasses, keep the eyecups fully extended (“up” position). If you are wearing glasses, roll down the eyecups or twist them to the down position. This will bring your eyes closer to the binocular’s eyepiece (ocular) lens to ensure you can see the entire image (full field of view with no “cutoff” or “tunnel vision”).

IPD (Interpapillary Distance) Adjustment
The distance or spacing between the center of the pupils, called “interpapillary distance” (IPD) varies from person to person. To adjust the binocular to match your eyes, follow these simple steps:

1. Hold your binocular in the normal viewing position. Grasp each barrel firmly.
2. Move the barrels closer together or further apart until you see a single circular field (don’t worry about focus yet).
3. Always re-set your binocular to this position before using it.

Diopter Adjustment and Focusing

1. Adjust eyecups interpapillary distance as described in the previous sections.

2. Set the diopter adjustment ring to zero and view a distant object.

3. Keep both eyes open at all times.

4. Using a lens cover or your hand, cover the objective (front) lens of the same side of the binocular that has the diopter adjustment ring. This is usually the right side.

5. Using the center focus wheel, focus on a distant object with fine detail (e.g., brick wall, tree branches, etc.) until it appears as sharp as possible.

6. Uncover the objective lens on the diopter side, cover the other objective lens, the left side, then view the same object.

7. Using the diopter adjustment ring, move the diopter adjustment marker to the “+” or “-” till you reach focus.
   Caution should be used as over turning or forcing the diopter ring can cause damage or cause the eyepiece to break away from the chassis.

8. Your binocular should now be adjusted for your eyesight. Focusing for any distance can now be done simply by turning the center focus wheel. Make a note of your diopter setting for future reference.

Neckstrap Attachment
To securely attach your binocular to the binocular strap:

1. Thread the end of the strap from the bottom up through the strap attachment loop.
2. Hold the buckle and thread the end of the strap inside the buckle.
3. Adjust the overall length and pull the strap webbing tight so it is secure within the buckle.

Waterproof / Fogproof Models
ALPEN binoculars are designed and built utilizing the latest waterproof and fog proof technology (this will be noted on the product packaging). Waterproof models are O-ring sealed for complete moisture protection. Fog proof protection is achieved from dry nitrogen purging that removes all internal moisture.

Tripod Mounting (tripod and tripod adapter not included)
To attach the binocular to a tripod or mono-pod, unscrew (counter-clockwise) the cap which covers the threaded socket at the far end of the center hinge, and set it aside in a safe place. Use a compatible binocular tripod adapter accessory to attach your binocular to any standard tripod in a horizontal position to provide a stable image during prolonged viewing.

Care and Cleaning

Your BRESSER binocular will provide years of trouble-free service if it receives the normal care you would give any fine optical instrument.

• Do not expose non-waterproof models to heavy rain or other excessive moisture.
• If your binocular has roll-down, flexible eyecups, store it with the eyecups up. This avoids excessive stress and wear on the eyecups in the down position.
• Avoid sharp impacts. Use the included neck trap to avoid accidentally dropping the binoculars to prevent misalignment of the optics.
• When not using them, store your binoculars in the provided case in a cool, dry place.
• Avoid storing the binoculars in hot places, such as the passenger compartment of a vehicle on a hot day. The high temperature could adversely affect the lubricants and sealants. Never leave the binocular where direct sunlight can enter either the objective or the eyepiece lens. Damage may result from the concentration (burning glass effect) of the sun’s rays.
• All moving parts of the binocular are permanently lubricated. Do not try to lubricate them.

To Clean Your Binoculars Lenses

1. Blow away any dust or debris on the lens (or use a soft lens brush).
2. To remove fingerprints or other smears, clean with a soft cotton cloth rubbing in a circular motion. A “microfiber” cleaning cloth (available from camera or computer retailers) is ideal for the routine cleaning of your optics.
3. For a more thorough cleaning, photographic lens tissue and photographic-type lens cleaning fluid or isopropyl alcohol may be used.
   Always apply the fluid to the cleaning cloth – never directly on the lens.

For assistance or to return an item, contact Alpen at 866.252.3811 or visit explorescientific.supportsync.com for return procedures.

© 2019 Alpen Optics

• 1010 S 48th Street, Springdale, AR 72762
• explorescientificusa.com 
• alpenoptics.com 
• 866.252.3811
• All rights reserved.
• Made in China.
• CONTENTS AND COLORS MAY VARY

References

• Alpen Optics | Bresser | Vixen
• Explore Scientific Support
• Keep Exploring with Explore Scientific Telescopes, Microscopes, & STEM

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>