ALPEN OPTICS AP-800 LED Rechargeable Tek-Light User Manual
- June 5, 2024
- ALPEN OPTICS
Table of Contents
ALPEN OPTICS AP-800 LED Rechargeable Tek-Light
Parts
- Power button
- Flashlight (White)
- Floodlight (White/Red)
- Charging Port/Magnetic Base
- Battery Cap
- Rechargeable Li-ion 3.7V Battery (16340)
- USB Charging Cable w/Magnetic Head
- Body Clip
- Headband
Charging the Rechargeable Tek-Light
- The Tek-Light uses a magnetic charging head to recharge the included battery.
- To recharge the battery, plug the USB charging cable into a power source and attach the magnetic head to the magnetic base of the Trek-Light.
- The indicator displays blue when connected to a power source, turns red when charging, and back to blue when fully charged. Max charging time is about 2 hours.
- It is recommended to regularly charge the Tek-Light after months of storage to maintain optimal battery performance.
Battery Replacement
Unscrew the battery cap, remove battery, insert the new battery with the anode
side (+) towards the inner side, then screw the battery cap back on. It is
recommended to use a coaxial rechargeable Li-ion 16340 3.7V battery. Battery
Bottom Side (-) NOTE: If non-coaxial battery is used, the included charger
will not charge the battery and will need to be charge
per battery manufacturer’s guidelines.
WARNING: Avoid charging non-rechargeable batteries.
Output Selection
With the Trek-Light switched off, press the Power button to turn on and cycle through each light mode, 1-6.
Flashlight Modes
Floodlight Modes
Flashlight SOS White
Floodlight SOS Red
Specifications
Warranty
Limited 1 Year Warranty once registered within 60 days of purchase from
Explore Scientific, LLC.
Visit
explorescientificusa.com/productregistration
or scan the QR code to register your product online and familiarize yourself
with the applicable warranty coverage.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>