ASUS ROG NX Snow-PBT Wireless Gaming Keyboard User Guide

ASUS ROG NX Snow-PBT Wireless Gaming Keyboard User Guide

Package Contents

Keyboard features

Top view (US layout for reference)

view

1. Switch function button
2. Multiwhee
3. Adjustable feet with 3 tilt positions
4. Magnetic receiver storage
5. Connection switch
6. USB Type-C® port / USB Type-C®

Getting started

1. Connect your keyboard to a PC with the bundled Type-C® cable.
2. Download and install the Armoury Crate software from https://rog.asus.com.
3. Follow the software instructions to update your keyboard’s firmware.
4. Customize your keyboard using Armoury Crate

Setting up as a wireless keyboard

1. Remove the Omni receiver from the keyboard and insert the Omni receiver to a USB port on the PC.
2. Set the connection switch on the keyboard to RF 2.4GHz.

• The Omni receiver can be connected to multiple devices through the Armoury Crate software.

Setting up Bluetooth for the first time

Set the connection switch to Bluetooth mode.

Pairing Bluetooth mode to additional host devices

1. Set the connection switch to Bluetooth mode.
2. Press and hold the Fn + 7 for 3 seconds until the RGB indicator on your gaming keyboard starts to blink blue. Once your gaming keyboard has been successfully paired, the RGB indicator on your gaming keyboard will light up blue for 3 seconds.

Key combinations

On-the-fly Macro Recording

Step 1:   Fn + Left-ALT to start recording
Step 2: Enter the keys to be recorded as a macro
Step 3: Fn + Left-ALT to end recording
Step 4:  Assign Macro Key
Profile Switch
Fn + 1 / 2 / 3 / 4 / 5 / 6* * **6 is default
Light Effect Switch
Fn + Right or Fn + Left
Brightness Level
Fn + Up:
Brightness up
Fn + Down:
Brightness down
Factory Default
Fn + Esc: Hold these two buttons until the LEDs blink green.
BLE host switch
Host 1 (default):
Fn + 8Host 2:
Fn + 9Host 3:
Fn + 0
Function Keys
Fn + Ins:
Scroll Lock| Fn + Del:
Pause
Fn + PgUp:
Home| Fn + P:
Print screen
Fn + PgDn:
End| Fn + R-Ctrl:
Menu
F – Switch
Fn + =:  Toggle between function keys or F1-F12** (default)
Function keys :
F1:           (Win + G) Open the Game Bar
F2:           (Win + Alt + PrintScreen) Take a screenshot of your game
F3:           (Win + Alt + G) Record the last 30 seconds
F4:           (Win + Alt + R) Start or stop recording
F5:           (Win + Alt + M) Start or stop microphone recording
F6:           Play/Pause| F10:          Volume down
F7:           Previous track| F11:          Volume up
F8:           Next track| F12:          Stealth key
F9:           Mute|

Battery status

The battery status can be checked at any time by pressing and holding FN + -. When the battery status is below 20% the keys will light up red.

Multiwheel and Switch function button

Press the switch function button ( ) to rotate between modes. You can then use the Multiwheel to adjust the settings for each function ( )

Modes

Media Contro| B: Volume up
C: Volume down
D: Mute/Unmute
Media Content| B: Previous track
C: Next track
D: Play/Pause
Brightness adjustmen| B: Brightness up
C: Brightness down
D: Brightness 100% / Brightness 0%
Customization (Reassignment in Armoury Crate)| B: Scroll up (default, can be reassigned)
C: Scroll down (default, can be reassigned)
D: Scroll click (default, can be reassigned)

Swapping the Spacebar

Remove

Install

Safety Guidelines

Keep the device away from liquid, humidity, or moisture. Operate the device only within the specific temperature range of 0°C (32°F) to 40°C (104°F). When the device exceeds the maximum temperature, unplug or switch off the device to let it cool down.

Notices

Limitation of Liability

Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property; or any other actual and direct damages resulted from omission or failure of performing legal duties under this  Warranty Statement,up to the listed contract price of each product.

ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringement under this Warranty Statement.

This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible.

UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD- PARTY CLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR (3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY.

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is onnected.
• Consult the dealer or an experienced radio/TV technician for help.

CAUTION! The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment

Compliance Statement of Innovation, Science and Economic Development Canada (ISED)

This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

CAN ICES-003(B)/NMB-003(B)

Radio Frequency (RF) Exposure Information

The radiated output power of the Wireless Device is below the Innovation, Science and Economic Development Canada (ISED) radio frequency exposure limits. The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized.

This device has also been evaluated and shown compliant with the ISED RF Exposure limits under portable exposure conditions. (antennas are less than 20 cm of a person’s body).

ASUS Recycling/Takeback Services

ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions.

REACH

Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm.

Proper disposal

DO NOT throw the device in municipal waste. This product has been designed to enable proper reuse of parts and recycling. The symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment and mercury-containing button cell battery) should not be placed in municipal waste. Check local regulations for disposal of electronic products.

DO NOT throw the device in fire. DO NOT short circuit the contacts.
DO NOT disassemble the device.

RF exposure warning

The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment.
The equipment must not be co-located or operating in conjunction with any other antenna or transmitter.

Lithium-Ion Battery Warning

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.

KC RF Output table

UKCA RF Output table (The Radio Equipment Regulations 2017)

CE RED RF Output table (Directive 2014/53/EU)

Simplified UKCA Declaration of Conformity

ASUSTek Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of The Radio Equipment Regulations 2017 (S.I. 2017/1206). Full text of UKCA declaration of conformity is available at https://www.asus.com/support/.

CE Mark Warning

ASUSTeK Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of related Directives. Full text of EU declaration of conformity is available at:www.asus.com/suppor

Service and Support
Visit our multi-language website at https://www.asus.com/support/.

London,EC3M 6BL, England
Country| United Kingdom

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>