FOCAL LITTORA 1000 10 Inch In Wall 2 Way Speaker User Manual

LITTORA 1000
1000 ICW6 – 1000 ICW8 – 1000 ICW SUB10
User Manual

LITTORA 1000 10 Inch In Wall 2 Way Speaker

LITTORA 1000

|
---|---

Specifications

LITTORA 1000 ICW8

LITTORA 1000 ICW10

LITTORA 1000 ICW SUB10

READ THIS FIRST!

IMPORTANT SAFETY INSTRUCTIONS!

| Warning symbol. This symbol is designed to warn the user of the presence of important instructions mentioned and relating to the handling, operation and maintenance of the device.
---|---
1.  Read these instructions.
2.   Keep these instructions.
3.   Heed all warnings.
4.   Follow all the instructions.
5.   After unpacking the product, make sure the packaging is kept out of the reach of children. It poses a suffocation risk.
6.   Never use chemical products or abrasive detergents. Only clean the device with a dry cloth.
7.  Do not obstruct ventilation openings. Follow the manufacturer’s instructions for installing the device.
8.   Do not install or store the device close to a heat source such as a radiator, cooker, heat vent or any other appliance that gives out heat.
9.   The device must not be exposed to temperatures above 65°C.
10.   Do not subject the product to continuous dripping water.
11.  Do not install the product in areas liable to submersion.
12.   Do not insert any objects into the device’s ventilation openings. They could touch one of the high-voltage components or short-circuit them and cause a fire or electric shock.
13.   If the product emits smoke or an unusual smell, immediately turn off the power supply (put it in standby mode) and stop using it. Contact your retailer as soon as possible.
14.   Use accessories recommended by the manufacturer.
15.   If cords or connectors are supplied, use them properly as described in the user manual without substituting them or modifying them.
16.   Do not attempt to repair this device yourself. Opening the device may expose you to dangerous voltages or other risks.
17.  All maintenance tasks should be performed by a qualified professional.| Maintenance is required following any damage to the device, such as damage to the cabling or the plug, objects inserted into the device, liquids spilled inside the device, or if the device is incorrectly operated or dropped.
18.  After any maintenance or repair work on the device, ask the
maintenance technician to test it to check that it is working safely.
19.  When replacement components are needed, make sure that components recommended by the manufacturer
or components with exactly the same technical features as the original product are used. Using non- compliant components could cause fires, electric shocks or other risks.
20.   Any damage to the product will invalidate its IP certification. As such, if any liquid or solid comes into contact with the product then it could present a danger to the user or could damage a third party electronic device connected to the product.
21. If a subwoofer is installed, it is important to secure the system by attaching it firmly. We recommend that you fix the sub to the floor or a wall for safety. If it is not properly installed, it could become a projectile in the event of an accident. This point is even more paramount if the enclosure is installed in an open space.
22.  If the product is to be installed on a boat: when sailing and manoeuvring, be sure to use your audio system at a reasonable volume so as not to compromise your safety or that of others. At anchor, respect the regulations in force on noise pollution.
23.  Some users are not sufficiently autonomous to use the product alone without danger. In particular, children under the age of 14 and people with certain disabilities must be supervised and/or accompanied when using the device.| 24.  To avoid damaging your hearing, do not listen to loudspeakers at high volumes for long periods of time. Listening to loudspeakers at high volumes can cause damage to the user’s ears and may lead to hearing problems (temporary or permanent deafness, buzzing in the ears, tinnitus, hyperacusis). Exposure to excessive volumes (over 85 dB) for more than one hour can cause irreparable damage to your hearing.
25. The loudspeakers use a tweeter with an inverted dome made from beryllium.
Read the information contained in the specific booklet on beryllium carefully. Certain precautions should be taken to avoid exposure to risks:
a. The beryllium dome must never come into contact with abrasive materials.
b.  If the beryllium dome is damaged in any way, use the protective adhesive strip supplied to cover the entire surface area of the dome, as soon as possible.
You will find the adhesive strip in the plastic packet containing the leaflet for the pure beryllium inverted dome tweeter. Contact your retailer to disassemble and replace the tweeter.
c. If the dome is broken, any beryllium particles should be carefully collected using sticky tape and then placed in a hermetically sealed plastic bag and sent back to the retailer along with the loudspeaker.
For further information, refer to the safe use manual in the box. You can also address your questions directly to: beryllium@focal.com
(IEC 60417-6044)

The methods of installing and mounting loudspeakers to any surface (bracket, ground anchoring, etc.) depend on the conditions and standards of installation, refurbishment, safety and cabling in force and applicable to the surfaces and/or brackets involved. In addition, the products may vibrate and damage the brackets onto which they are mounted. For this reason, the installation operations must be performed by a qualified professional who is familiar with installation and safety standards. Focal does not provide any end-of-use warranty for a given bracket or installation, as installing the loudspeakers is the customer’s sole responsibility. Focal is therefore not liable in any capacity whatsoever in the event of incident, accident and/or any other result or damage of any kind related to the installation of loudspeakers.
Please validate your Focal-JMlab warranty, it is now possible to register your product online at: www.focal.com/garantie

http://www.focal.com/warranty/

Thank you for purchasing a Focal product. Welcome to our High-Fidelity world. Innovation, tradition, excellence and pleasure are our values; our one and only aim is to bring you a sound that is rich, pure and true. To get the most out of your product, we recommend that you read the instructions in this booklet, then store it in a safe place to refer to in the future.

Package contents

• 1 x loudspeaker from the 1000 Series range
• 1 x circular grille
• 1 x cable connector
• 1 x QuickStart guide
• 1 x set of safety instructions and warranty terms and conditions

Key points
Beryllium inverted dome tweeter: The tweeter uses Foal’s exclusive inverse dome technology, which enables optimum transfer of energy and limited directionality. The dome’s beryllium guarantees exceptional performance in terms of lightness, damping and rigidity, to provide a silky, detailed and precise treble. Tweeter included in ICW8 and ICW10 products. Speaker driver with Fiber IP cone: All cones in the speaker drivers from the 1000 Series range are made using Fiber IP sandwich technology. IP Fibre is a non-woven, glass fibre cone. The sandwich layers increase damping and make the products from the 1000 Series very versatile. The co-molded Santorini® surround of the speaker driver ensures reliability in harsh environments and long-term stability.
Protection grille: Easy to fit and good integration. Does not rust.
Indoor/outdoor mode filtering: The performance of the speaker driver can be adapted depending on whether it is part of an indoor or outdoor system. To do this, click a button on the rear panel of the speaker driver (fig. 3).
IP65 certification: The product is fully sealed against the ingress of dust and is protected against water jets.
Choosing an amplifier
It is not an excess of amplifier power that can damage your loudspeaker and drivers, but rather a lack of power. In fact, if the volume is too high, the amplifier saturates and generates parasite signals that may destroy the tweeter. The dynamic capacity and definition of Integration 1000 Series loudspeakers are high enough to reveal the strengths and weaknesses of whatever amplifier is connected to them.
It is recommended to use an amplifier that delivers 20% more power than the system’s total power to avoid a surge or damage to the products. Your retailer will guide you depending on your tastes and budget. Ensure that you follow the recommendations for your amplifier in order to correctly connect each 1000 Series product.
Loudspeaker positioning
The loudspeakers in the 1000 Series range have been developed to deliver the most faithful sound reproduction for any style of music. Nonetheless, a few simple rules should be followed to optimise their performance and to guarantee good tonal balance and a realistic sound image.
For the purposes of improvement or to take into account any legal or regulatory changes, FOCAL-JMLab reserves the right to modify the technical specifications of its products without prior notice. Where applicable, the images shown are intended for illustration purposes only, and may differ slightly from the product sold.
Use in multiple loudspeaker systems (ceiling)
For use in multiple loudspeaker systems (each loudspeaker working independently of the others), the loudspeakers can be installed according to your requirements and the constraints of the space. However, take care not to install the loudspeakers too close to a wall or a corner, to avoid excessive low-frequency levels. The angled brackets for ICW6, ICW8, ICW SUB10 (sold separately), allow them to be installed close to the wall with directionality of the sound dispersion.
Pre-installation wiring
You can only install your speakers once you have wired them up. Make sure you leave enough cable length to be able to connect your product with ease. We recommend using a cable with a marker to ensure the polarity of the speaker drivers is respected (+/-). Choose good quality cables with a cross-section appropriate for their length: your dealer will be able to advise you.

INSTALLATION

The methods of installing and mounting loudspeakers to any surface (wall, ceiling, etc.) depend on the conditions and standards of installation, the layout, safety and cabling in force and applicable to the surfaces and/or brackets to which they are fixed. In addition, the products may vibrate and damage the brackets in which they are installed. For this reason, the relative installation operations must be performed by a qualified professional who is familiar with installation and safety standards. Focal does not provide any end-of-use warranty for a given bracket or installation, as installing the loudspeakers is the customer’s sole responsibility. Focal is therefore not liable in any capacity whatsoever in the event of an incident, unhooking, fall, accident and/or any other result or damage of any kind related to the installation of loudspeakers.
Before installing the loudspeakers, ensure that the intended positions on the ceiling/wall/ground are not obstructed, by the routes of air vents for example, or any cables that may interfere with the installation. Use the appropriate tools to help you determine suitable locations for the installation.
These products are IP65 certified, meaning they have increased water resistance and are fully dustproof. To protect their lifespan, however, we do not recommend exposing them to permanently running water, and never immerse them in water.
After heavy rainfall, we recommend waiting a few hours before turning them on again; allowing them to dry-out naturally will restore nominal audio functioning.
It is possible to install our speaker drivers in our angled brackets (6”, 8”, 10”) available as accessories. This will allow you to angle the speaker driver installed by 30°.

Existing construction

• Ensure that the ceiling/wall is thick enough to allow the product to be installed.

• You can only install your loudspeakers once you have wired them up. Link them with the cable connector supplied to ensure they are fully sealed (fig. 2). Make sure you leave enough cable length to connect your product with ease (approximately 19 3/4
  “/ 50cm) (fig. 3). We recommend using a cable with a marker that ensures the polarity of the speaker drivers is respected (+/-). Choose good quality cables with a cross-section appropriate for their length: your dealer will be able to advise you.

• The loudspeaker is fitted to the wall and ceiling using rotating brackets. To do this, place the loudspeaker into the cut-out opening and turn the screw on the mounting brackets clockwise to tighten it using a Phillips screwdriver or a screw-gun. If using a screwdriver, make sure that the tightening torque is set to a low value to avoid damaging the mounting brackets (fig. 5). The loudspeaker is adequately attached when you feel resistance at the end of tightening.

New construction

• Use a suitable tool to cut a circular opening in the ceiling/wall (fig. 1).
• Prepare the cables and make sure you leave enough cable length to be able to connect your product with ease (approximately 19 3/4 “/ 50cm). Link them with the cable connector supplied to ensure they are fully sealed (fig. 2). We recommend using a cable with a marker to ensure the polarity of the speaker drivers is respected (+/-). Choose good quality cables with a cross-section appropriate for their length: your dealer will be able  to advise you (fig. 3).
• The loudspeaker is fitted to the wall using rotating brackets. To do this, place the loudspeaker into the cut-out opening and turn the screw on the mounting brackets clockwise to tighten it using a Phillips screwdriver or a screw-gun. If using a screwdriver, make sure that the tightening torque is set to a low value to avoid damaging the mounting brackets (fig. 5). The loudspeaker is adequately attached when you feel resistance at the end of tightening.

SPECIAL PRECAUTIONS

Maintenance
To clean your 1000 Series loudspeakers, simply dust using a dry cloth. If the loudspeaker is marked, we recommend that you use just a damp duster. Never use solvents, detergents, alcohol or corrosive products, scrapers or scouring utensils to clean the surface of the loudspeaker.
Paint
The grille on the 1000 Series products can be painted to blend in with your environment. For best results, clean the surfaces you want to paint with a gentle detergent to remove any traces of grease and sand them gently with a very fine-grit sandpaper (around 300 grit). Remove the grille and paint it using a paint gun. We recommend adding protection behind the grille so as not to risk painting other elements. The paint used can be the same type as the paint used on the walls . Ensure that you do not clog the grille with paint, as this would alter the unit’s sound quality.
Running-in period
The speaker drivers used are complex mechanical assemblies which need a running-in period to operate at their best and to become acclimatized to the temperature and humidity of your environment. This running-in period varies depending on the conditions in question and may take several weeks. To reduce this time, we recommend operating your speaker drivers for about 20 hours at a moderate volume. Once the speaker drivers’ characteristics have totally stabilised, you will be able to enjoy your Integration Marine 1000 Series loudspeakers’ performance to the full.
Warranty terms and conditions
Outside France, Focal equipment is covered by a warranty for which the terms and conditions are determined or implemented locally by the official Focal distributor for each country, in accordance with the laws in force in the region in question.
Correct elimination of this product.
**** This marking indicates that within the EU this product should not be disposed of with other household wastes. To prevent any risk to the environment or human health, please recycle them responsibly to encourage the reuse of material resources. To return your used device, please use the return and collection systems available, or contact the retailer where you purchased the product. They can recycle this product safely.

1000 SERIES MARINE
1000 ICW8 MARINE/ 1000 ICW10 MARINE/
1000 SUB ICW10 MARINE
Demurrage rapider
Quick Start

GO TO THE USER MANUAL

https://www.focal.com/usermanual/marine-1000-series

|
---|---

IMPORTANT SAFETY INSTRUCTIONS!

| The methods of installing and mounting loudspeakers to walls, ceilings or any other surface depend on the conditions and standards of construction, refurbishment, safety and cabling in force and applicable to the brackets involved. In addition, the products may vibrate and damage the brackets in which they are installed. For this reason, the relevant installation operations must be performed by a qualified professional who is familiar with installation and safety standards. Focal does not provide any end-of-use warranty for a given bracket or installation, as installing the loudspeakers is the customer’s sole responsibility. Focal is therefore not liable in any capacity whatsoever in the event of unhooking, fall, accident and/or any other result or damage of any kind related to the installation of loudspeakers.
---|---
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all the instructions.
5. After removing the product from its packaging, throw the bag away out of the reach of children. They could play
with the bag, which could present a suffocation risk.
6. To clean your device, only use gentle cleaning products and never chemical products or abrasive detergents.
7. To avoid damaging your hearing, do not listen to loudspeakers at high volumes for long periods of time.
Listening to loudspeakers at high volumes can cause damage to the user’s ears and may lead to hearing problems (temporary or permanent deafness, buzzing in the ears, tinnitus, hyperacusis). Exposure to excessive
volumes (over 85dB) for more than one hour can cause irreparable damage to your hearing.
8. Some users who are not self-sufficient enough to use the product on their own without danger, particularly  children under 14 or people with some types of
disabilities, must be supervised and/or accompanied when using the device.
9. If a subwoofer is installed, it is important to secure the system by attaching the enclosure solidly. We recommend that you attach the enclosure to the floor or a wall for safety. If the subwoofer is not properly secured, it could become a projectile in the event of an accident. This point is even more paramount if the enclosure is installed in an open space.
10. If cords or connectors are supplied, use them properly as described in this user manual without substituting them or modifying them.
(CEJ 60417-6044)| 11. If the kit or connector includes a fuse, it must only be replaced by a fuse of the same rating.
12. Use accessories recommended by the manufacturer.
13. Do not install the product in areas liable to submersion.
14. Do not operate it nearby radiators or place it nearby other devices that produce a lot of heat.
15. Never put or leave metallic objects (such as coins or metal tools) inside the loudspeaker.
16. If the product emits smoke or an unusual smell, immediately turn off the power supply (put it in standby mode) and stop using it. Then contact your retailer as soon as possible.
17. Do not attempt to repair this device yourself. All maintenance tasks should be performed by a qualified professional. Maintenance is required in case of any kind of damage to the device (damaged cable or plug, spillages or objects inserted into the product, if the device malfunctions or overturns, etc.).
18. After any maintenance or repair work on the device, ask the maintenance technician to test it to check that it is
working safely.
19. If the product is damaged in any way its IP certification will no longer be valid, so if any liquid or solid comes into contact with the product then it could
present a danger to the user or could damage a third party electronic device connected to the product.
20. When used in a nautical setting: when sailing and manoeuvring, be sure to use your audio system at a reasonable volume so as not to compromise your
safety or that of others. At anchor, be sure to respect the regulations in force on noise pollution.| 21. Your loudspeakers use a tweeter with an inverted dome made from beryllium.
Please read the information contained in the specific booklet on beryllium carefully. Certain precautions should be taken to avoid exposure to unnecessary
risks:
a. The beryllium dome must never come into contact with abrasive materials.
b. If the beryllium dome is damaged in any way, use the protective adhesive strip supplied to cover the entire
surface area of the dome, as soon as possible. You will find the adhesive strip in the plastic packet containing the
leaflet for the pure Beryllium inverted dome tweeter. Contact your retailer to disassemble and replace the tweeter.
c. If the dome is broken, any beryllium particles should be carefully collected using sticky tape and then placed in
a hermetically sealed plastic bag and sent back to the retailer along with the loudspeaker.
For more information, please refer to the safe use manual in the box. You can also address your questions directly to: beryllium@focal.com

REGISTER YOUR PRODUCT ONLINEwww.focal.com/warranty
BERYLLIUM
Precautions for use

FOCAL-JMLab is a public limited company which has its headquarters at 108, rue de l’Avenir at La Talaudière (42). It is registered in the commercial register of companies of Saint-Étienne under the number 344 394 309 000 35.
This notice is for a tweeter with an inverted dome made from pure beryllium, with the capacity to augment the bandwidth to 40kHz.
Due to the potential danger associated with beryllium, which is the material the tweeter is made from, certain precautions for use must be taken by the user of the speakers to avoid the risk of absorbing the aforementioned material as described below.
However, in solid form and according to the knowledge available on the date on which this notice was produced, the risk is limited, as the main danger posed by the substance occurs when it is inhaled or absorbed in the form of vapours or microparticles.

Characteristics of Beryllium

cause pulmonary lesions following repeated exposure or prolonged exposure by inhalation
Ocular irritation – Category 2| H319: Causes serious ocular irritation
Toxic to certain specific organs, single exposure Category 3| H335: May irritate the airways
Skin sensitization – Category 2| H315: May cause skin irritation
Skin sensitization – Category 1| H317: May cause skin allergies

Precautions for use

The following precautions for use must be scrupulously followed.
2.1. The tweeters contain a beryllium dome and must therefore be handled with caution.
Users of the speakers must particularly ensure that the grille or all other protective parts of the tweeter are cared for and the beryllium must under no circumstances be removed from its original location.
As a general rule, speakers must be kept out of the reach of children and specifically access to the tweeter and to the beryllium dome must be prevented.
2.2. The Beryllium dome must never come into contact with abrasive materials At room temperature, beryllium is a stable product; however it does react with sulphuric acid, hydrochloric acid and hydrofluoric acid to release hydrogen.
Conditions to avoid: high temperatures, sparks, naked flames or other ignition sources. Beryllium is not compatible with oxidizing agents and also particularly bromine pentafluoride and performic acid. It will explode when heated with magnesium.
In its finely divided form, beryllium is a moderately flammable product. In a confined space, a cloud of metal dust can explode in the presence of an ignition source. In the event of a fire, beryllium emits smoke and highly toxic fumes.
In the event of a fire, the extinguishing agents which are stipulated are special powders for metal fires or if these are unavailable, other inert powders. It is also advisable to wear adequate personal protection to prevent contact with the substance or its combustion products as well as an integral self-contained respirator with pressure regulator or which is pressurised.
2.3. As a general rule, contact with skin or eyes, inhalation or ingestion of all or part of the beryllium dome should be avoided. The manufacturer stresses that the absorption of beryllium through the respiratory, cutaneous or digestive tract may cause severe physical disturbances.

Instructions in case of damage to the dome

If the beryllium dome is damaged in any way, it should be covered as soon as possible. We recommend that you contact the retailer to have the tweeter dismantled and replaced by trained personnel at the distributor.
If the dome is broken, any beryllium particles should be carefully collected and then placed in a hermetically sealed plastic bag. It should be sent back to the retailer at the same time as the speaker.

First aid

In case of inhalation: If beryllium or beryllium dust is inhaled, bring the affected person outside or to an aerated place and put them in a semi-seated position so that they can breathe comfortably. If the person is not breathing, administer artificial respiration. In case of respiratory difficulties, give the person oxygen. Transfer the person to the nearest medical services or call an anti-poison centre.
In case of contact with the eyes: Rinse immediately using plenty of water for 15 minutes or until all of the product has been removed. Remove contact lenses if the person in question is wearing them and if they can be removed easily. We recommend that you contact a doctor.
In case of contact with skin: Remove any contaminated clothes and shoes quickly; throw away clothes and shoes. Wash the skin with soap and water for at least 15 minutes. Clean any cuts and injuries quickly and carefully. Any particles of beryllium which have accidentally become lodged underneath the skin must be removed. Consult a doctor.
In case of ingestion: If the victim is conscious, rinse out their mouth with water and ask them to drink several glasses of water for dilution purposes. Seek medical assistance immediately. Never give liquids to a person who is unconscious or having convulsions. Vomiting should only be induced on the orders of a doctor or an anti-poison centre. Consult a doctor rapidly.

At the end of the speaker’s service life

This Focal product has been designed and manufactured using high-quality components which can be recycled and reused.
** This symbol means that electrical and electronic devices, when they come to the end of their service life, must be disposed of separately from household waste.
This device must not be disposed of in nature or with household waste. Please return it to the waste disposal facility or recycling centre.
For more information about beryllium, please contact us directly at the following address: beryllium@focal.com
Correct elimination of this product.
** This marking indicates that within the EU this product should not be disposed of with other household wastes. To prevent any risk to the environment or human health, please recycle them responsibly to encourage the reuse of material resources. To return your used device, please use the return and collection systems available, or contact the retailer where you purchased the product. They can recycle this product safely.

https://www.focal.com/regulatory-product-information
Scan QR code for information on packaging disposal
Focal-JM lab ® – BP 374 – 108, rue de l’Avenir – 42353 La Talaudière Cedex – France – www.focal.com
Tel. (+33) 04 77 43 57 00 – Fax (+33) 04 77 43 57 04 – SCCG – 13/06/2023 – v6 – CODO1450
Use this adhesive label to seal the face of the Beryllium tweeter in case of damage to the dome. Focal-JMlab® – BP 374 – 108, rue de l’Avenir – 42353 La Talaudière cedex – France – www.focal.com
Tel. (+33) 04 77 43 57 00 – Fax (+33) 04 77 43 57 04 – SCCG – 25/10/2022 – v1

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>