BURDA PERFECTCLIME RCA200VINDU Patented Heating and Cooling Devices Instructions

: June 3, 2024
: BURDA PERFECTCLIME

Table of Contents

SAFETY INFORMATION:
LOCATION:
POWER CORD:
CLEANING:
TECHNICAL DATA:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TERM2000 INDUSTRY IP67
RCA200VINDU
INSTRUCTIONS FOR USE

Subject to errors and technical changes!

Dear Customer,
please read the following information carefully before using the appliance for the first time for your own safety and to ensure correct use.

SAFETY INFORMATION:

Only connect the appliance to a properly installed socket-outlet with earthing contact.

Possibly a slow-blow C-fuse is necessary if experience problems by switching on to overloaded fuses.

Only connect the appliance to a.c. mains as specified on the rating plate.
Never touch live parts! Danger to life!
Never operate the appliance with wet hands!

Danger to life!

Never use the appliance if the appliance or cord is damaged. Risk of injury!
Do not store or use any flammable materials or sprays in the vicinity of the appliance when the appliance is in use. Fire hazard!
Do not use the appliance in flammable atmospheres (e.g. in the vicinity of combustible gases or spray cans)! Explosion and fire hazard!!
Important! Do not insert any foreign objects into the appliance openings! Risk of injury (electric shock) and damage to the appliance!
Attention! Do not look longer time into the light!
Attention! The unit completely becomes very hot when the appliance is in use! Place the appliance so that it cannot be touched by accident. Risk of burns!
Do not place any items of clothing, hand towels or similar over the heater to dry. Risk of

overheating and fire hazards!

The swivel bracket must not be adjusted while the appliance is in use! Risk of burns! Allow the appliance to cool down before adjusting the bracket.
The appliance is not intended for use by young children or infirm persons without supervision! Young children should be supervised to ensure that they do not play with the appliance!
The socket outlet must be accessible at all times to enable the main plug to be disconnected as quickly as possible! These instructions for use belong to the appliance and must be kept in a safe place.
When changing owners, these instructions must be surrendered to the new owner!
The appliance must be allowed to cool down before being carried and stored!

LOCATION:

The radiating element is designed for wall-and-ceiling type operation with permanent connection and must be installed at least 2,1 m (2000W) above the ground!
The appliance should only be used mounted horizontally or vertically on a wall.
A minimum distance of 150 cm must be maintained between the front grille and flammable items (e.g. curtains), walls, and other structures.
The appliance must not be mounted directly on flammable materials.
The equipment should never be placed nor mounted directly under a wall socket!
As the appliance radiates heat, no objects such as furniture should be placed between the appliance and the person using the appliance!
The heater can be installed face down.

POWER CORD:

The power cord must not come into contact with hot appliance parts!
Never pull the plug out of the socket at the cord! Never move the appliance by pulling at the cord or use the cord for carrying purposes!
Do not coil the cord around the appliance! Do not use the appliance with the cord coiled!
Do not crush the cord or drag it over sharp edges or place it on overheated hotplates or naked flames!

INSTALLATION:

The appliance should be fitted and connected by a qualified electrician.
Prior to starting any electrical work, the voltage must be switched off to make sure that the wiring is dead!
Only switch on the appliance when installation is complete.

SWITCHING ON FOR THE FIRST TIME:

After switching on the appliance for the first time and following extended periods of nonuse, the appliance may smell for a short time.

CLEANING:

First, disconnect the equipment from the power supply system!
After the appliance has cooled down, the housing can be wiped dry.
Do not touch the quartz rods with your fingers, since stains could build up from such a contact.
The reflector should be cleaned regularly
Do not use any abrasive or caustic cleaning agents!
Never immerse the appliance in the water! Danger to life!

AFTER-SALES SERVICE:

All repairs must be referred to authorized personnel! Therefore, you should contact your specialized dealer or customer service.
Important! Any tampering with the appliance will invalidate the warranty.
Repairs carried out improperly and by unqualified persons may have serious consequences for the user!

TECHNICAL DATA:

Rated voltage: 230 V/50 Hz
Rated output: 1000W/1650W/2000W
Dimensions (LxWxD): 50,2/61,5×9,5 x 12,5cmWeight about: 2,0/2,3 kg
Protective system: IP67

Burda Worldwide Technologies GmbH
Rudolf-Diesel Straße 18 – 65760 Eschborn
T: +49 6173 324240 – F:+49 6173 3242424
E:info@burdawtg.de – www.burdawtg.com