FIT 474DS Motor Panasonic Gx Force Instruction Manual

: June 3, 2024
: FIT

Table of Contents

PREFACE
ABOUT THESE OPERATING INSTRUCTIONS
SAFETY INSTRUCTIONS
PRODUCT AND TECHNICAL SPECIFICATIONS
CLEANING AND SERVICING
RECYCLING AND DISPOSAL
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Motor Panasonic Gx Force
Instruction Manual

PREFACE

Dear FIT customer,
The FIT system offers many useful functions and options and we are pleased that you have decided to choose our system.
Please read through the operating instructions carefully to ensure you use the system safely and get off to a quick start.
We hope you enjoy discovering the FIT’s functions and have a fun ride every time you use it.
Thank you for placing your trust in FIT.
Your FIT Team

ABOUT THESE OPERATING INSTRUCTIONS

2.1 MANUFACTURER
Biketec GmbH
Luzernstrasse 84
CH-4950 Huttwil
fit-ebike.com/en-en/
2.2 LANGUAGE
The original operating instructions are written in German. A translation is invalid without the original operating instructions.
2.3 DECLARATION OF CONFORMITY
Biketec GmbH hereby declares that the products described in these operating instructions comply with EU directives.
The complete EU Declaration of Conformity is available online at: fit- ebike.com/en-en/service/declaration/
2.4 ON INFORMATION
Different markings are used in the operating instructions to make them easier to read.
2.5 WARNINGS IN THESE OPERATING INSTRUCTIONS
Warnings indicate hazardous situations and actions. You will find the following warnings in the operating instructions:
DANGER
May lead to serious or even fatal injuries if ignored. Medium-risk hazard.
CAUTION
May lead to minor or moderate injuries if ignored. Low-risk hazard.
NOTICE
May lead to material damage if ignored.

SAFETY INSTRUCTIONS

3.1 GENERAL INFORMATION
Please read all safety instructions carefully. Failure to comply with the warnings or to take residual risks into account may result in electric shock, fire and/or serious injury.
Keep the operating instructions in a safe place and have them readily available to consult. Pass these instructions on if you provide your e-bike for someone else’s use.
When used in these operating instructions, the word “battery” refers to all original FIT e-bike batteries.
3.2 DRIVE UNITS
Do not make any changes that affect the power or the maximum speed that the drive supports, especially to increase it. You may endanger yourself and others and you may be using your e-bike illegally in public spaces.
Do not open up the drive unit yourself. Only qualified technical staff may repair the drive unit and only with original spare parts. This ensures that the drive unit remains safe. Unauthorised opening of the drive unit will void the warranty. All components fitted to the drive unit and all other e-bike drive components may only be replaced with components of an identical design or ones specifically approved by your e-bike’s manufacturer. This protects the drive unit from overloading and damage. When the push assist system is switched on, the pedals may possibly turn as well.
When the push assist system is activated, make sure that you are at a sufficient distance from the rotating pedals. There is a risk of injury. The brakes and the motor may become very hot during operation. There is a risk of burns or fire in case of contact. Never touch the brakes or the motor directly after a ride. Never place the e-bike on a flammable surface, such as grass or wood, or near flammable objects directly after use.
3.3 WHAT TO DO IN AN EMERGENCY
3.3.1 DANGEROUS SITUATION IN ROAD TRAFFIC
If you encounter any hazards or dangers in road traffic, apply the brake until the e-bike comes to a halt. The brake acts as an emergency stop system in such cases.

PRODUCT AND TECHNICAL SPECIFICATIONS

4.1 PANASONIC GX FORCE FIT ECO, PANASONIC GX FORCE FIT PRO, PANASONIC GX FORCE FIT PRO COASTER AND PANASONIC GX FORCE FIT ECO COASTER
Whether used for commuting in the city or excursions in the countryside, the Panasonic GX Force FIT provides riders with quiet, powerful assistance. Ideal for everyday use or longer trips with finely tuned assistance.

4.2 PANASONIC GX ULTIMATE FIT ECO AND PANASONIC GX ULTIMATE FIT PRO
Panasonic’s dynamic GX Ultimate motors deliver great power for steep climbs and an effortless start on slopes. With high-performance assistance up to 300% and a torque up to 95 Nm, the steepest climbs become gentle, rolling hills.

4.3 PROPER USE
All check lists and instructions for actions in these operating instructions met. The drive unit is designed to supply power to the e-bike only and must not be used for other purposes.
4.4 IMPROPER USE
Improper use refers to use which is not described under proper use or goes beyond proper use.
4.5 TECHNICAL DATA
4.5.1 PANASONIC GX FIT FORCE / PANASONIC GX FORCE FIT COASTER

Electric drive| Panaonic GX Force FIT Eco
Panaonic GX Force FIT Pro
Panaonic GX Force FIT Eco
Coaster
Panaonic GX Force FIT Pro
Coaster
---|---
Type| NUA233F (Eco)
NUA233F (Pro)
NUA234F (Coaster)
Part nos.| 500041 (Eco)
500041 & Upgrade 501058 (Pro)
500078 (Eco Coaster)
500078 & Upgrade 501058 (Pro
Coaster)
Axle profile| JIS 4-Kant
Max. torque| Nm 60 (Eco)
75 (Pro)
60 (Coaster)
Nominal voltage| V 36
Operating temperature Storage temperature| °C -10 to +40
Storage temperature| °C -20 to +50
Weight about| kg 3,2

4.5.2 PANASONIC GX ULTIMATE FIT

Electric drive| PANASONIC GX Ultimate FIT Eco
PANASONIC GX Ultimate FIT Pro
---|---
Type| NUA230F (Eco)
NUA230F (Pro)
Part nos.| 500042 (Eco)
500042 & Upgrade 501059 (Pro)
Axle profile| ISIS
Max. torque| Nm 70 (Eco)
95 (Pro)
Nominal voltage| V 36
Operating temperaturStorage temperature| °C -10 to +40
Storage temperature| °C -20 to +50
Weight about| kg 2,95

CLEANING AND SERVICING

5.1 CLEANING THE MOTOR
CAUTION

If water enters the motor, it will be permanently damaged.
Never immerse the motor in water.
Never clean with a pressure washer, water jet or compressed air.
Never use cleaning agents.
Carefully clean the motor with a soft, damp cloth.

TROUBLESHOOTING, FAULT CLEARANCE AND REPAIR
6.1 TROUBLESHOOTING AND FAULT CLEARANCE
6.1.1 DRIVE SYSTEM OR DISPLAY DOES NOT START UP
If the display and/or the drive system do not start up, proceed as follows:

Check whether the battery is inserted correctly. If it is not, insert the battery correctly.
Start the drive system.
If the drive system won’t start, remove the battery.
Clean all the contacts with a soft cloth.
Insert the battery.
Start the drive system.
If the drive system won’t start, remove the battery.
Fully charge the battery.
Insert the battery.
Start the drive system.
If the drive system won’t start, press the on-off button (operating element) for at least 8 seconds.
If the drive system does not start after about 6 seconds, press the on-off button (operating element) for at least 2 seconds.
Contact your specialist dealer if the drive system does not start.

6.1.2 ERRORS IN THE ASSISTANCE SYSTEM

Symptom	Cause	Remedy

Assistance is not
available.|

Is the speed too high?
Is the battery charged sufficiently?
The motor may become too hot during rides at high emperatures, up long inclines or when carrying a heavy oad for a long time. The rechargeable battery, isplay or operating element may be connected ncorrectly, or one or more of them may have a roblem.

| 1. Check display screen. The motor assistance is only active up to the maximum speed for which the e-bike is approved.
2. Check battery is charged.
3. Recharge the battery if it is almost flat.
4. Switch off the drive system.
5. Wait a moment and then check again.
6. Contact your specialist dealer.
Assistance is not
available.| Are the pedals being pushed?
Is the system switched on?
Is the level of assistance set to OFF?| 1. Your e-bike is not a motorbike. Push the pedals.
2. Press on-off button (operating element) to switch on the system.
3. Set the level of assistance to HIGH, STD, ECO orAUTO.
4. Contact your specialist dealer if you still feel that the no assistance is being supplied.
Symptom| Cause| Remedy
---|---|---
The assisted
journey distance
is too short.| The battery does not perform as well inwinterweather.
The journey distance can be shorter depending on he road conditions, the level of assistance and the otal light usage time. Is the battery fully charged?
The battery is a consumable. Repeated charging and ong periods of use cause the battery to degrade (loss of power). Are the tyres pumped to an|

This does not indicate a problem.
1. Check battery is charged.
2. Recharge the battery if it is almost flat.
3. If the distance covered with a fully charged battery has become shorter, the battery ay be affected. Replace the battery with a new one.
4. If the distance you can cover with one single charge is very short, replace the attery ith a new one.

It is difficult to
pedal.| Are the tyres pumped to an adequate pressure?
Is the level of assistance set to OFF?
The battery charge might be low Have you switched n the system with your foot on the pedal?| 1. Pump up tyres.
2. Set the level of assistance to HIGH, STD, ECO or AUTO.
3. Check battery is charged.
4. Recharge the battery if it is almost flat.
5. Switch on the system again without applying pressure to the pedals.
6. If assistance is still not supplied, contact your specialist dealer.

6.2 REPAIR
Special expertise and tools are required for many repairs. That is why only a specialist dealer may perform repairs.
6.2.1 ORIGINAL PART
The individual e-bike parts have been carefully selected and matched to one other. Only original parts must be used for maintenance and repair. Observe the operating instructions for the new components.
6.2.2 REPLACING THE LIGHTS
Replace components with ones in the right power class.
6.2.3 ADJUSTING THE HEADLIGHT
The headlight must be positioned so that its beam hits the road surface 10 m in front of the e-bike.

RECYCLING AND DISPOSAL

7.1 DISPOSAL
Mechanical and electrical devices, accessories and packaging should be taken for recycling in an environmentally responsible manner. Do not dispose of them in the ousehold waste!
For EU countries only: According to the European Directive 2012/19/EU on waste electrical and electronic equipment and its implementation in national law, chargers that an no longer be used must be collected separately and recycled in an environmentally responsible manner

Biketec GmbH
Luzernstrasse 84
CH-4950 Huttwil
T +41 62 959 53 00
[email protected]
fit-ebike.com