KIVI LED TV User Manual
- June 4, 2024
- KIVI
Table of Contents
KIVI LED TV
User manual
LED TV
Please read this manual before using the device.
This operating manual applies to color KIVI LCD TV, designed to receive
broadcast television signals and contains the information necessary for the
consumer for correct and safe operation.
If you have any questions, functionality, as well as complaints, or
suggestions, please contact our online support service online chat, e-mail and
ringtones. On the extension of the warranty period, you can clear your
techniques for free service.
The warranty presupposes a free overhaul of the unit, complete in the course
of the warranty period.
Please use your smartphone to scan the QR code to contact the technical
support service through the proposed communication channels.
| |
---|---|---
https://m.me/220808125161757|
tg://resolve?domain=HelperKIVI_bot|
https://clc.to/ae1OUA
BY: 8 820 032 100 86
RU: 8 800 600 10 15| KZ: 8 800 070 01 70
UA: 0 800 606 600
---|---
This user manual is included with the TV. An electronic version is also available to users. This guide is available at doc.kivismart.com/manual and the QR code on the left.
Important notice regarding software
Software license included with the product
The software for this product is made up of multiple software components, and
each of these individual components is copyrighted by the developer.
This product uses a third-party software component specified in the User
Agreement.
All content, including images, software code, logos, graphics, sounds, and
services available through this device, belongs to third parties and is
protected by copyright, patents, trademarks, and/or other intellectual
property laws. Such content and services are provided solely for your
personal, non-commercial use. You may use content or services only with
permission from the content owner or service provider. Without limiting the
general meaning of the foregoing, you may not, unless permission is obtained
from the respective owner of the content or services, modify, copy, republish,
upload, publish, transmit, translate, sell, create derivative works, promote,
or in any way distribute any content or services obtained using this device.
By starting to use the device, you acknowledge that there is no transfer or
assignment of intellectual property rights to you, and this provision should
not be interpreted as a transfer (alienation) and (or) assignment of any
intellectual property rights. You acknowledge that you are liable in case you
violate the intellectual property rights of the third parties, in particular
copyright and related rights, as well as exclusive rights to an invention,
utility model, industrial design, or trademark. You acknowledge that you are
responsible for the legality of the use of applications that will be installed
by you or by third parties after you start using the device. The manufacturer
and/or the company importing of KIVI TM products shall under no circumstances
be liable for infringement of intellectual property rights of the third
parties if the such infringement was caused by the creation, upload, posting,
copying, or modification of information, materials, or images in the device
made by you or third parties after you start using the device.
Warnings
| The
TV is carrying high voltage. Do not try to disassemble the TV. Contact the
authorized service center for assistance.| 
| Do not place or drop any objects
on the surface of the TV. Do not spill liquid on the device.
---|---|---|---
To reduce the risk of ire or electric shock, do not expose the TV to rain or
moisture.| Do not place the TV on an unstable surface. TV falling may cause
injury or damage to the device.
Protect the TV from falling, bumps, and collisions with other objects, which
may cause injury and damage.| If you are not using the TV for a long time,
unplug the power plug.
Do not block the ventilation openings on the cabinet. The device should be
used by children only under adult supervision.| Do not expose the device to
direct sunlight or other heat sources. Do not place open
lame sources such as candles near the TV.
Do not place the TV on a power cord.| Observe the minimum distance between the
TV and surrounding objects. Do not overheat the
device.
Product name| KIVI LED TV
---|---
Warranty| 1 year
Service life*| 3 years
Operating temperature, °C| +15 – +35
Storage relative humidity,%| 45 – 75
Storage temperature,°C| +5 – +40
Atmospheric pressure, kPa / mm Hg.| 86 -106 / 650 – 800
Operating relative humidity,%| 55 – 70
Consumed power in off mode| <1 W or absent
*Service life is the calendar period of product use for its intended purpose, starting from its introduction into circulation, during which the manufacturer (importer/supplier – legal entity accepting claims) guarantees its safety, ensures the possibility of its use, and is responsible for significant shortcomings arising from his fault.
**The manufacturer’s plant depends on the country of sale. Detailed
information on the origin of the product in your region can be found on the
packaging label or on the product itself.
Safety rules and warnings
- Use a certified cable with the HDMI logo. Otherwise, it may result in connection errors or the image may not be displayed.
- In order to ensure safety and extend the life of the product, it is not recommended to use unlicensed software.
- Any damage, injury, or malfunction resulting from the use of unlicensed components or software is not covered by the warranty.
- Make sure that all screws in the stands or bracket are correctly inserted and tightened securely (if the screws are not tightened irmly enough, the TV may tilt after installation or be unstable).
Transportation
- The TV must be transported strictly in an upright position, without movement to the sides, in the box and packing materials in which the TV is delivered.
- Disconnect the power cord and all other cables before lifting or carrying the TV.
- When transporting, pay attention to the display marker on the box. Do not place the box on the side of the display.
- Transporting, unpacking, and carrying the TV is recommended to be done by two people.
- Hold the TV by the top and bottom of the cabinet. Never hold the device by the display or carry it by the stand.
Unpacking
Before using the TV, carefully remove the shipping tape without jerking so as
not to damage the TV panel. You can turn on the TV for up to 1 minute to check
the integrity of the matrix. This does not contradict the rules of operation.
Removing the shipping tape from the panels does not affect the warranty or
return policy. There may be inscriptions and symbols in the film. It is
recommended to remove the film before use. The list of damages that prevent
further use of the TV:
- the power cord or plug is damaged.
- the TV screen is damaged.
- if the TV gets wet.
- after the TV has been dropped.
The liquid crystal panel is a high-tech product. During operation, tiny black
or colored dots may appear on the panel, which are noticeable only when you
look at the screen closely at close range. Within certain limits, this effect
is normal for this type of display and does not affect the device’s performance
and image quality. An accurate assessment of the condition of the panel (and
other potential malfunctions of the device) is carried out only by an
authorized service center using special equipment.
Depending on the viewing position (left / right/top/bottom), the brightness
and color of the panel may change. This is due to the structural features of
the panel. This has nothing to do with performance and is not a malfunction.
**Class II This symbol indicates that this product is double
insulated between mains voltage and hazardous parts to the user. Only use
original spare parts for maintenance.
At the end of its useful life, this product must be returned to the relevant
drop-o point for recycling and disposal of the electrical and electronic
equipment.
By ensuring this product is disposed of correctly you help preserve natural
resources and prevent damage to the environment and human health that can
otherwise occur if not handled properly.
For more information on the drop-and disposal points of this type of
equipment, please contact your local municipal authority or your household
waste disposal company.
Terms and conditions for effective, safe use of goods**
- Read the manual carefully before using the TV. Keep this manual.
- Observe all safety precautions.
- Follow all the instructions.
- Do not use this device near water.
- Wipe the device with a dry cloth.
- Do not block the ventilation holes, install in accordance with the instructions.
- Do not install the device near heat sources.
- Do not neglect the integrity of the power plug. If your outlet does not fit, contact a specialist.
- Protect the power cord from accidental damage. The power cord must be positioned so that it cannot be stepped on or pinched on by objects placed on or near it. Particular attention should be paid to the places where the cord is connected to electrical outlets and devices.
- Use only compatible accessories.
- Turn off the device during lightning storms or when you are away for a long period.
- The service and repairs should be provided by qualified personnel. Do not use a device damaged in any way (moisture ingress, damaged cable, etc.).
- Do not cover the device and ventilation openings.
- Do not use near open sources of fire.
- Dispose of your device and accessories in accordance with applicable regulations and standards.
- Use the device in a dry, clean, ventilated area.
- Do not place containers with liquid on the device.
- Distance from heating devices should be at least 1m, air temperature from +15 ° С to 35 ° С, and relative air humidity 55–70%.
- Connect the TV using a relay or constant-voltage regulator to protect the TV from possible power surges.
- Do not attempt to use for this device any equipment/cables with connectors other than those specified by the manufacturer of this product with this device.
Rules for cleaning the surface of the TV
- If there is a shipping sticker on the TV screen, some dirt may remain after removing it. Remove dirt before watching TV.
- When cleaning, the outer surface of the product and the screen may be scratched. To prevent scratches, wipe the outside of the TV and its screen with a soft LCD cleaning cloth.
- Do not spray water or other liquids directly on the TV. Liquid entering the product may cause damage, fire, or electric shock.
- Use a soft dry cloth to clean the TV cabinet. Do not use flammable liquids (such as benzine, thinners) or detergents.
To remove stubborn stains, you may apply a small amount of screen cleaner to
the fabric. Turn off the TV and use a microfiber cloth to gently wipe the
screen to remove grease
and fingerprints. Clean the unplugged TV.
ATTENTION:
To reduce the risk of ire or electric shock, do not use this device in high
humidity.
ATTENTION
HAZARDOUS VOLTAGE!
ATTENTION
TO AVOID THE RISK OF THE ELECTRIC SHOCK, DO NOT DISASSEMBLE THE DEVICE. USE
THE SERVICES OF THE REPAIR SPECIALISTS.
This symbol indicates the electric shock hazard.
**** This symbol indicates the need to comply with the relevant instructions.
Specifications
Model reen size diagonally, inch/cm
Display resolution
Backlight type
pet do if power
mode, Orkin/gcm2
W USB 2.0 MI
DMI 2.1
Bluetooth
Composite
RCA input
Optic
audio output
.5 port (audio)
Ethernet CI
RF antenna
5 ohm IEC type)
Analog tuner
Digital tunerWiFi Supply
voltage
VESA standard, mm
VESA screw type| R740LW 32F790LW 55 U740LB ill – H740LB 32F740L8 43U790LW
55U790LW 40F740LB 43F740LB 50U740LB 65U740LB
---|---
32/81 32/81 40/102 43/109 43/109 50/127 55/140 65/165
HD FHD 1366×768 1920×1080| UHD 3840×2160
| Direct LED|
16:09
18| 18| 16| 21| 0,021
0,019| 21| 20| 0.020
2| 3
3| 4
HDMI 1.4a| HDMI 2.1
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
DVB-C, DVB-T2
b/g/n| a/b/g/n/ac
100-24013 – 50 lit
Hole depth for Vesa screws, mn
Width, height,
depth, mm
dimensions incl.
stand, mm Net| 200×100| 200×100| 200×2001100| 200×200| 400×200
M4| M4| M6| M6| M6| M6| M6| M6
730×427
x68| 730×427
x68| 901×511
x64| 912×530
x65| 1123×650
x62| 1123×650
x62| 1238×714
x61| 1455×837
x64
730×467
x180| 730×467
x180| 901×574
x231| 912×222
x588| 1123×711
x231| 1123×711
x231| 1238×776
x269| 1455×900
x313
4,2| 4,4| 6,4| 6,3| 11| 11| 12,9| 15,3
Installing the TV on a stand
The stand is recommended to be installed by two people.
Choose a smooth, flat surface on which you will perform the installation.
To protect the display and cabinet from damage, place a clean cloth on top of
the surface or use the shipping envelope that came with your TV. Place the TV
on the display, holding it so that the center of gravity is not at the corners
and sides. Remove the 4 ixing screws from the accessories package and ix the
stand with them according to the symbols indicated on them (L – left, R –
right). The instructions are drawn based on the front view of the TV.
** To avoid damage, mount the TV securely to the wall according to the
installation instructions.
Installing the TV on a bracket**
The TV is recommended to be installed on the bracket by two people or a
qualified technician.
he TV is not supplied with screws for mounting the device to the bracket.
Choose a smooth, lat surface on which you will perform the installation.
To protect the display and cabinet from damage, place a clean cloth on top of
the surface or use the shipping envelope that came with your TV. Place the TV
on the display, holding it so that the center of gravity is not at the corners
and sides. Mount the bracket elements using four screws matching the width of
the holes in the TV. To select a bracket, refer to the VESA parameters
indicated in this manual.
Connecting the antenna to the TV
Note:
The manufacturer, importer, and supplier is not responsible for damage to TV
components as a result of high voltage supply through the antenna port.
Input impedance: 75Ω
For stable reception of digital TV channels, we recommend using an outdoor
antenna with an amplifier (gain of 30 dB or more).
Front Panel
-
IR sensor for remote control
-
LED status indicator (blue – TV in standby mode, response to the signal of the IR remote control.
Inactive – TV is on or no power supply) -
Joystick control
RC (remote control) Operating range of the remote control (remote control) is up to 10 meters (in the absence of interference or other signal obstacles) To use the remote control, you first need to insert batteries as shown in the schematic picture (the schematic image of the remote control may dier from the real one). For correct operation of the remote control, point it at the IR (infrared) sensor of the TV. We recommend using only alkaline batteries.
Do not mix new batteries with old ones. This can cause overheating and battery
leakage. Batteries should not be exposed to direct sunlight, fire, or electric
heaters. Do not insert non-rechargeable batteries into the charger. Do not
store batteries in the remote for more than one month when not in use.
The terms HDMI and HDMI High-definition Multimedia Interface and logo HDMI are
trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Manufactured under license from DOLBY LABORATORIES. The DOLBY, DOLBY AUDIO,
and double D symbols are trademarks of DOLBY LABORATORIES.
Remote control (RC40)
Key assignment:
To put the TV on standby, turn off or turn on the power. To put the TV into
sleep mode, make a short press. To put the TV into standby mode, hold down the
button and confirm with OK
Choose from a variety of input sources.
Activation of the search menu.
Start playback. Pause playback.
Opens the settings menu.
Click to apply.
Press to navigate the OSD menu. OK confirms the selection.
Return to the previous menu.
Press to open or close the OSD menu.
Click to open the home page.
Adjust the sound level.
To access the next or previous channels.
To disable or enable audio output from the speaker.
Click to open YouTube.
Click to open NETFLIX.
Click to open KIVI Media.
Press to call the media service.
- Supplied with models 32H740LW, 32H740LB, 32F740LB, 40F740LB, 43F740LB
** Voice search function is available in RC40 / 60 remotes. The RC60 pointer controller can be purchased separately – this will expand the functionality of the complete RC40 remote control.
* Package contents and appearance may dier or may be changed manufacturer without notice.
Remote control/pointer (RC60)**
Key assignment:
To put the TV on standby, turn off or turn on the power. To put the TV into
sleep mode, make a short press. To put the TV into standby mode, hold down the
button and confirm with OK.
Choose from a variety of input sources.
Activation of the search menu.
Activating Pointer Mode.
Opening the settings menu
Click to apply.
Press to navigate the OSD menu. OK confirms the selection.
Return to the previous menu.
Press to open or close the OSD menu.
Click to open the home page.
Adjust the sound level.
To access the next or previous channels.
To disable or enable audio output from the speaker.
Click to open YouTube.
Click to open NETFLIX.
Click to open KIVI Media.
Press to call the media service.
- Supplied with models 32F790LW, 43U740LB, 43U790LW, 50U740LB, 55U740LB, 55U790LW, 65U740LB
** Voice search function is available in RC40 / 60 remotes.
*** Package contents and appearance may dier or may be changed manufacturer without notice.
Note:
1. While using the remote control in applications, not all buttons and symbols are supported, as the applications are made by third parties.
2. It is possible to adjust the speed of the joystick by simultaneously pressing the buttons:
– speed increase – pointer button + right;
– decrease speed – pointer button + left.
Note:
Unfortunately, the standard Google Gboard keyboard temporarily does not
support control with a remote-pointer. For comfortable use of the pointer with
an on-screen keyboard, please open the settings using the notification window
that appears when you press the pointer button on the remote. You will be
prompted to connect to the Internet by connecting the TV to a Wi-Fi network,
as well as authorization in Google Play and installation of the necessary
application for the pointer to work correctly. After installing it, just press
the pointer button on the control panel again.
If you have already connected the TV to the Internet when you irst turned it
on, wait about 5-10 minutes until the Leanback application appears in the
general list of applications (the “+” icon in the TV main menu). After that,
click on the pointer icon on the remote again.
Detailed instructions in the form of images are also available on the
kivismart.com website, in the 24 \ 7 Support section.
We are sorry for the inconvenience caused.
Connecting devices
This TV is compatible with the majority of video playback devices. You may
connect audio, video, and other devices to it according to this manual and
manuals of other devices.
The TV can be connected to the following devices: Blueray, Android TV Box,
Game console, Audio system, etc.
HD, FHD models
UHD models
DC IN Input for external power supply 12V 3A
USB Input for USB devices (500mA)
HDMI HDMI type input
Antenna connection port
CI CAM module connection port
Mini AV IN Composite audio/video input| L/R Composite audio input
VIDEO Composite video – input
LAN Ethernet – input
HEADPHONE Headphone out (3.5mm)
OPTICAL OUT Optical output
---|---
Note:
- Some adapters and devices may work improperly, as they transmit the signal in non-standard ways.
- All external devices should be connected when the TV is off.
- The maximum load on the USB port should not exceed 0.5A.
Connecting a CI Conditional Access Card
CAM – a CI Card Module can be purchased from your local digital cable service
provider and can be provided with information on using the CI Card. If you
have any difficulties when working with the CI card, please contact the
service provider.
Due to the constant improvement of the products, the names of individual menu
modes, the designation of some connectors on the connector panel and the place
of their application, as well as the performance of certain ergonomic TV
control functions, depending on the software version, may slightly dier from
those described and depicted in this manual. which does not significantly
affect the operation of the TV.|
Initial setup
When you turn on the TV for the first time, an installation wizard will prompt
you for basic settings.
Please follow the prompts on the screen.
Press▼▲ to select the system language and press the OK button to confirm the
selection.
Pairing the remote* control. Press the Left button at the same time ◄ and the
Menu button . Press OK after 5 seconds. After the remote control is paired,
you can use the remote control via Bluetooth, it will be possible to use voice
input. If you do not need to use the remote control by means of Bluetooth, you
can press the Back or Right button to skip this step.
Optional: Connect your Android phone to your TV to tune TV from your
smartphone, or select “Skip” to skip this step.
Press▼▲ to make a Wi-Fi connection, press the OK button, and enter the network
password. You can also use Ethernet (wired internet connection).
To use Google services, you should “Accept” the terms of use and log in with
your Google account (your Gmail mail).
Enter the 4-digit system password using the remote control buttons or the on-
screen keyboard. This password will be requested when the parental control
function is enabled. Remember or write down your password.
To select a TV use mode, press ▼▲ the button, and press OK to confirm. Confirm
the selected mode again, select “Yes” to confirm the selected mode, or select
“No”. to return to the previous step.
By activating the Chromecast function, your TV will be available to stream
content from smartphones connected to your home network. This function, like
some other settings, can be activated later.
To select the tuner mode for searching, press ▼▲, to select, and press OK to
confirm. The TV starts scanning the channels. Prior to this operation, make
sure that your antenna or provider cable is connected to the TV according to
the instructions.
Complete the TV setup by following the instructions on the screen.
Main screen
Press the HOME button to go to the main menu page.
– Open Google Assistant, start a voice search or use voice input.
– Frequently used applications (frequently used applications can be
added/removed/changed by you if necessary).
APPs: Tap to go to the Apps screen, where all installed apps are listed
(by default, the entire list is not visible on the Home screen).
Notification: Show notifications.
Inputs: Icon for selecting an input source.
Network & Internet: Icon for network settings such as Wi-Fi.
Settings: Here you can configure various system parameters.
Press ▼▲, select the gear icon, and press OK to enter System Settings.
Network and Internet
Press▼▲, to select Network & Internet. Press the OK button to configure.
Follow the instructions on the screen to set up.
Channel setup
Channels: Select channel sources on the screen.
Antenna: When you select Antenna as the source, the TV can receive analog
(ATV) or digital (DVB-T/DVB-T2) television.
Cable TV: When set to Cable TV, the TV can receive both analog and QAM
broadcast signals.
Adding channels to favorites. To add the desired channel to the list of
favorites, while watching press the Options button on the remote control, then
Up, and select the appropriate item. To display the list of favorite channels,
press OK and, after the list of channels appears, the Blue button on the
remote control while watching TV channels.
Antenna
Main menu -> Settings -> Channel -> Channel installation mode
Select a mode and select Antenna.
Go to Main Menu -> Settings -> Channel -> Channels.
Start scanning in the selected mode.
You can also manually tune the channels if necessary or change their
distribution in the list.
Note: The aspect ratio mode in the “Full Screen” image settings is
intended for use with external sources connected via HDMI (in particular, a
PC). The work of broadcast
channels with this setting may dier from standard work.
Cable
Main menu -> Settings -> Channel -> Channel installation mode
Select a mode, and select Cable TV.
Select Main Menu – Settings – Channel – Channels.
Select the channel scan mode, with a choice of local operators and the default
scan mode.
Channel scan: automatic search with the ability to set some parameters
(Advanced, Full, Fast).
Single RF Channel Scan: Manual Scan
Signal sources (inputs)
Inputs: Configuring TV operation with external devices.
Control HDMI devices: Activates the submenu of HDMI CEC functions. CEC/ARC:
Consumer Electronics Control (CEC) – consumer electronics management. ARC is
an updated CEC technology and stands for Audio Return Channel.
By connecting an ARC / CEC-enabled device to the HDMI ARC port on your TV, you
can control the power, volume, and other functions using your TV remote. In
most cases, it will also be easy to transfer the TV sound to the device
automatically, without turning on other built-in TV speakers. The connected
device must also support ARC for this function to work. Activate the function
in HDMI settings Automatically disconnect the device: disconnect HDMI devices
together with the TV.
Automatically turn on the TV: automatically turn on the TV with an HDMI
device.
HDMI EDID ver.: setting the EDID version.
Power
Auto power-off: switching the TV to sleep mode after 10, 20, 30, 40, 50, 60,
90, 120 minutes.
Sleep timer: TV power-off after 30 to 240 minutes, or the option turn off.
Without picture: TV backlight turn-off.
Picture
Image mode: Choose between Custom, Standard, Vivid, Sports, Movie, Game, or
Power Saving.
Adjustment: Tint / Sharpness / Gamma / Color Temperature / Advanced Video
Settings / Color Settings.
HDR: Enables recognition of TV HDR files. Improved video codec: Activation of
receiving 4K content from external devices. Default reset: Reset all picture
settings to factory default values.
Sound
Sound style: Choose between User, Standard, Live Sound, Sports, Movie, Music,
and News.
Equalizer: Adjusts the sound parameters manually.
Loudspeakers: Choose between audio output sources.
ARC support: In order to enable support for ARC mode, you need to go to
Settings -> Sound -> Speakers and select “External audio system”. ARC mode is
enabled by default.
Digital output: Select between sound modes: Auto, Skip, PCM, Dolby Digital
Plus, Dolby Digital.
Digital SPDIF latency: Adjusts digital audio output.
Automatic volume control:
Default reset: Reset all sound settings to factory default settings.
Reset
Press the OK button to enter the submenu. This operation will return the TV to
its original state.
Reset – Reset – Delete All
Remote control and accessories
In this menu, you can pair Bluetooth devices *.
To connect the standard remote control, follow the instructions for the
description of the remote control.
To pair other devices, make sure the device is in search or pairing mode.
Multimedia player
Play media files from internal memory or USB device.
From the TV Main Menu select MuliMediaPlayer to display video, photo or text.
When using a USB flash drive, you can view the corresponding files in the USB
section.
Note: TV menu, functions, applications, and system appearance may dier
from the real one.
The TV can also be compatible with wired and wireless joysticks, controllers,
keyboards, mice, and other devices that support the Android TV system. As well
as joysticks Microsoft Xbox One, Microsoft Xbox 360, Sony DualShock 4,
Logitech F310 / F510 / F710
- Bluetooth remote control pairing only applies to KIVI remote controllers that support this function.
Launcher KIVI media *
The KIVI media launcher consists of categories:
Home screen: Menu, TV channels Recommendations: Movies, Applications, System.
The menu screen contains the categories: Applications, TV channels, Movies,
Cartoons, Sports, Games, Benefits, and Settings.
When changing categories, the category screen and splash screen change.
To activate the TV channels, you must accept the user agreement and enter the
phone number.
After entering the phone number, confirm the activation with the code from
SMS.
KIVI Media settings. They are started by pressing the “Menu” button on the
remote control when the user is on the main screen of KIVI Media. Among the
features: Quick jump to the main TV settings, Quick jump to WiFi settings, The
ability to set a photo or video as a background for KIVI Media, Fix the
background – increases the priority of the set photo/video background so that
it is displayed on top of all posters in the available sections of the
launcher
*Launcher is started by the KIVI-media button
Troubleshooting
A smart TV is a technological device with software. In addition to malfunctions related to the hardware, in case of non-standard operation of the TV, first of all, try to disconnect the TV for 30 seconds. If this is observed in joint work with other external devices (set-top box, router, etc.), we recommend you disconnect the connected device.
Unstable or missing terrestrial /
cable TV signal| 1. Does not find channels, channels
are shown with image distortion or
sound interruptions (antenna)
2. Does not find channels, channels
are shown with image distortion or sound interruptions (cable)| 1. For stable
reception of DVB-T2 (digital) and ATV (analog) signals, we recommend using an
outdoor antenna with an amplifier (gain of 30 dB or more).
Additional power supply for the antenna input from the TV side is not provided
and cannot be supplied through the USB ports of the TV. Point the antenna
towards the nearest TV tower.
If an indoor antenna is used, raise it higher, rotate it around its axis, and
move it indoors. Make sure the Antenna is selected under Settings – Channel –
Channel Installation Mode.
Tune channels manually (manual tune will show signal level and quality). For a
stable picture and sound, the indicators should be 50% and higher. Check the
integrity of the cable.
2. When using cable TV (DVB-C) or a common house antenna, we recommend
connecting without using a splitter (splitter). If possible, connect the TV to
a different antenna cable.
Make sure Cable TV is selected under Settings – Channel – Channel Installation
Mode. Tune channels manually (manual tune will show signal level and quality).
Check the integrity of the cable. Use a signal preamplifier.
---|---|---
No sound output to external
speakers| 1. Connecting acoustics via Bluetooth
2. Connecting acoustics via HDMI
3. Connecting acoustics via AUX (3.5 headphone jack)
4. Connecting acoustics to optics| 1. Connect the acoustics via Bluetooth
through the Settings – Remotes and accessories – Add device menu. Follow the
operating instructions for the acoustics to select the audio input and switch
it to synchronization mode.
2. Connect the acoustics to the TV in the HDMI (ARC) connector. In the menu
Settings – Sound – Speakers select “External audio system”. In the Settings –
Device Settings – Inputs – HDMI EDID Version – set the value to “EDID 1.4” In
Settings – Device Settings – Sound – Digital Output – select Auto, Skip, PCM,
etc. according to the supported mode. Follow the instruction manual of the
acoustics for the correct order of connection and selection of the audio
input.
3. Make sure that the audio cable is fully connected to the TV in the 3.5
(HEADPHONE) jack. Follow the instruction manual of the acoustics for the
correct order of connection and selection of the audio input.
4. Connect the acoustics to the TV to the OPTICAL connector. In Settings –
Device Settings – Sound – Digital Output – select Auto, Skip, PCM, etc.
according to the supported mode. Follow the instruction manual of the
acoustics for the correct order of connection and selection of the audio
input.
Using the VOL button on the KIVI remote control, reduce the TV sound volume
until it is completely muted. Using the remote control from the acoustics,
increase the sound to the required level.
Using a web browser as a video viewer or listening to music can lead to its
closure and malfunction of the TV as a whole.
Use multimedia apps that are content-responsive. For example, YouTube,
Netflix, etc.
kivismart.com
Scan the QR code with your smartphone camera or Viber
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>