KIVI 40F740NB 40 Inch FHD Google Android TV User Manual
- June 10, 2024
- KIVI
Table of Contents
KIVI 40F740NB 40 Inch FHD Google Android TV
General Information
The KIVI Color LCD TV is a product with the following specifications :
- Product Name: KIVI Color LCD TV
- Warranty Period: Not specified
- Relative Humidity while storing: Not specified
- Atmospheric Pressure, KPA / mmHg: Not specified
- Relative Humidity while operating: Not specified
- Electricity Consumption in off mode: Not specified
Product Features
The KIVI Color LCD TV features:
- Channel->channel setup mode menu.
- Manual channel configuration.
- Stable image and sound quality with indicators at 50% or higher.
Remote Control
The KIVI Color LCD TV comes with a remote control for easy operation.
Connection Ports
The KIVI Color LCD TV has various connection ports including:
- Not specified
When Something Goes Wrong
If you experience any issues with the KIVI Color LCD TV, please contact the support service for assistance.
Product Usage Instructions
- To configure channels, go to the Channel -> Channel setup mode menu.
- If using cable TV (DVB-C) or a common house antenna, it is recommended to connect without a splitter. If possible, connect to another antenna cable. Select an antenna in the Settings -> Channel -> Channel setup mode menu to configure the channels manually for stable image and sound quality.
Hello there! It’s me, your KIVI color LED-TV, and I will tell you how to use me safely.
If you still have any questions about my settings, functionality, or have any
complaints or suggestions, please contact the support service.
To chat, scan the QR-code or call by phone numbers.
GENERAL INFORMATION ABOUT ME
PRODUCT NAME
| ****
KIVI COLOR LCD TV
---|---
Warrantyperiod| 2 years
Operating temperature,°C| +15 – +35
Relative humidity while storing, %| 45 – 75
Temperaturewhile storing,°C| +5 – +40
Atmospheric pressure, KPA / mmHg| 86 – 106 / 650 – 800
Relative humidity while operating, %| 55 – 70
Electricity consumption in off mode| ****
<1 W or missing
Recommendation only for countries where EU directives apply. This device complies with the standards and meets the requirements of Directive 2014/53 / EU.
- Service life – the calendar period of use of products for their intended purpose, starting from commissioning, during which the manufacturer (importer/supplier-legal entity accepts the claims) guarantees safety, ensures the possibility of its use and is responsible for any defects caused by its fault.
- The manufacturing plant depends on the state of sale. Detailed information about the origin of the product in your region can be found on the label, packaging, or product.
TO BE SAFE WITH ME
- Make sure that all screws in the supports and bracket are properly tightened.
- I do not recommend using unlicensed software.
- Use a certified cable with the HDMI logo.
TO TRANSPORT ME:
- I will be in an upright position, full completeness and packaging. Do not place the box on the side of the display.
- Hold me by the top and bottom of the body, not by the display or stand.
DON’T USE ME IF:
- The power cord, plug, or screen is damaged.
- I fallen myself or your favorite cat fallen on me.
TO USE ME EFFECTIVELY AND SAFELLY:
- Read and follow all instructions and precautions.
- If your outlet doesn’t fit, please, contact a specialist.
- Please connect me to power supply using a voltage stabilizer or relay only.
TO KEEP ME CLEAN:
- Wipe me with a cloth designed for the care and maintenance of the LCD screens.
- Do not spray liquids directly on me.
- If you touch me with greasy or sticky hands, turn me off,apply screen cleaner to a microfiber cloth, and wipe me down.
This symbol indicates that I have double isolation between the mains voltage
and dangerous parts for you.
Friends, unfortunately, I am not eternal. Therefore, at the end of my term, I
shall be handed over to the receiving point of electrical and electronic
equipment. For more detailed information about receiving and disposal points,
please contact local municipal authorities or a household waste disposal
company.
Tiny black or colored spots can appear on my liquid crystal panel while in
operation.
Depending on the viewing location, brightness, and color of the panel can
change. And it is absolutely Okay.
WHO AM I? MY FEATURES
FEATURES
Model
| 32H730NB
32H740NB
| 40 F 730 N B
40 F 740 N B
| 43U 730N B
43U 740N B
| 50U 730N B
50U 740N B
| 55U 730N B
55U 740N B
| 65U 730N B
65U 740N B
---|---|---|---|---|---|---
Diagonal screen size, inches/cm| ****
32/81
| ****
40/102
| ****
43/109
| ****
50/127
| ****
55/140
| ****
65/165
Resolution| HD
1366х768
| FHD
19201080
| UHD
3840×2160
USB 2.0| 2| 3
HDMI| 3| 4
HDMI| HDMI 1.4a| HDMI 2.1
Wi-Fi| b/g/n| a/b/g/n/ac
VESA standard, mm| 200×100| 200×200| 300×300| 400×300
VESA bolts| M4| M6| M6| M6| M6| M6
Width, height, depth, mm| 720x425x62| 899x512x62| 962x558x83.5|
1116x643x80| 1231x720x82| 1450x842x83
Dimensions with stand, mm| 720x465x180| 899x574x231|
962x620x233| 1116x706x265| 1231x774x265| 1450x905x333
Net weight, kg| 4,2| 6,4| 7,5| 9,1| 11| 16,7
*Indicators of power supply, power consumption related to the operation of “Home” TV Mode, indicators mode “store” may differ upwards. **The complete set, appearance and specifications of the product may differ or may be changed by the manufacturer without prior notice
INSTALL MY ANTENNA AS SHOWN BELOW
INPUT IMPEDANCE: 75 Ω
For stable reception of digital TV channels, I recommend using an external
antenna with an amplifier (the gain ratio of 30 dB or more).
NOTE:
The manufacturer, importer, or supplier are not responsible for damage to my
components due to high voltage supply through the antenna port.
- The terms HDMI, HDMI High-definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI and Microsoft Administrator, Inc.
- Manufactured under DOLBY LABORATORIES license. The DOLBY, DOLBY AUDIO, and Double D symbols are trademarks of DOLBY and laboratories.
- This product is manufactured, distributed, serviced and warranted exclusively by SHENZHEN MTC CO., LTD. “JVC” is a trademark of JVCKENWOOD Corporation, used by this company is under license. ”Sound by JVC”. Sound certificated by JVC.
REMOTE CONTROL
NOTE:
- The manufacturer may change The complete set and appearance may differ or may be changed by the manufacturer without prior notice.
- Remote control has CE certification.
- TVs come with RC18 remotes for models 32H730NB, 40F730NB, 32H740NB, 40F740NB and RC20 for models 43U730NB, 50U730NB, 55U730NB, 65U730NB, 43U740NB, 50U740NB, 55U750N74B, 65U740N74
-
Remote control
(RC) range — up to 10 meters.. -
To make it work – insert the alkaline batteries and point it at me.
-
Do not mix new batteries with old ones, and do not leave the remote control near a heat source.
-
If you don’t use the remote control for more than one month, get the batteries out of there.
I HAVE TO APOLOGIZE FOR SOME INCONVENIENCES!
Unfortunately, the standard Google Gboard keyboard temporarily does not support the remote control pointer. THEREFORE:
- Open Settings using the notification window that appears when you click on the pointer button on the remote control.
- Connect the Wi-Fi, log in to Google Play, and install the necessary app for the pointer to work correctly.
- After installing it, click on the pointer button on the remote contro
- If you have already connected me to the Internet before – wait about 5-10 minutes, while the Ieanback app will appear in the general list of programs (the “+” icon in the main menu).
- After that, press the pointer button on the remote control
IF ANYTHING:
When using a remote control pointer in applications, not all buttons and
symbols are supported.
You can adjust the speed of the pointer by pressing the buttons
simultaneously:
- Speed increase – pointer button + right;
- Speed reduction – pointer button + left.
Detailed instructions with images are also available on the website kivismart.com, in the “24/7 support” section
CONNECTION PORTS
CONNECTING DEVICES
I am compatible with most devices for video and audio playback and can be connected to a Bluray, game console, stereo system, etc.
-
USB
Input for USB devices (500mA) -
HDMI
HDMI input -
Antenna
Antenna connection port -
CI
CAM module connection port -
Mini AV IN
Composite audio/video input -
VIDEO
Composite video input -
LAN
Ethernet input -
HEADPHONE
Headphone output (3.5 mm) -
OPTICAL OUT
Optical output
NOTE
- All external devices should not be connected after you turn me off.
- The maximum load on the USB port should not exceed 0.5 A.
- The TV supports ARC, CEC. 2K supports HDMI 1.4 a, 4K supports HDMI 2.1.
CONNECTING A CI CONDITIONAL ACCESS CARD
A CAM module with a CI conditional access card can be attached to a digital
cable broadcasting service provider along with information for use.
The names of individual menu modes, the designations of some connectors and
places of application, and the performance of individual ergonomic control
functions may differ slightly from those described and depicted in this
manual..
WHEN SOMETHING GOES WRONG
In addition to hardware-related malfunctions, if there are any non-standard operations, power me off for 30 seconds.
Unstable or missing broadcast / cable TV signal| 1. I’m on the antenna, but I cannot find channels, and I broadcast channels with image distortion or audio interruptions.| 1. For stable reception of DVB-T2 (digital) and ATV (analog) signals, use an external antenna with an amplifier (gain 30 dB and more).
Additional power to the antenna input is already transmitted and cannot be supplied via my USB ports.
Point your antenna toward the nearest TV tower.
If you are using a room antenna, raise it higher, rotate it around your own axle, and move it around the room.
---|---|---
| | Make sure that you have selected an antenna in the settings ->Channel ->
channel setup mode menu.
| | Configure the channels manually.
| | For a stable image and sound, the indicators shall be from 50% or higher.
| | Check the integrity of the cable.
| 2. I’m cable, but I don’t find channels, and I broadcast channels with
image distortion or audio interruptions.| 2. If you are using cable TV
(DVB-C) or a common house antenna, I recommend connecting without a splitter.
If possible, connect me to another antenna cable. Make sure that you have
selected an antenna in the Settings -> Channel -> Channel setup mode menu.
Configure the channels manually. Check the integrity of the cable. Use a signal amplifier.
Sound is
not played on external speakers
| 1. Connecting speakers via Bluetooth| 1. Connect Bluetooth speakers via the Settings menu – Remote controls and accessories
– Add a device.
2. Connect speakers via HDMI| 2. Connect the speakers to me via the HDMI (ARC) Jack.
In the Settings menu -> Sound -> Speakers — select “External audio system”. In the Settings menu –> Device Settings -> Inputs – > HDMI EDID version
– set the value to “EDID 1.4”.
| | In Settings menu -> Device Settings – > Sound -> digital output – select
Auto, Skip, PCM, etc.
| 3. Connect speakers via AUX (3.5 mm headphone jack)| 3. Make sure that the
audio cable is inserted all the way into the 3.5 jack.
| 4. Connecting speakers via optics| 4. Attach the speakers to the OPTICAL
connector.
In the Settings menu – > Device Settings – > Sound -> Digital output-> select Auto, Skip, PCM, etc.
Use the VOL button on the remote control to turn down the sound volume until it is completely turned off. Use the remote control from the speakers to increase the
sound to the desired level.