BRAINZ 38612 Woofer Speaker Instruction Manual
- June 14, 2024
- BRAINZ
Table of Contents
BRAINZ 38612 Woofer Speaker Instruction Manual
PLEASE READ THE INSTRUCTIONS CAREFULLY AND KEEP THEM FOR FUTURE REFERENCE
What you need
- DC5V/USB Cable (included)
- AUX Cable (optional, not included)
- Mobile phone, tablet, or laptop with Bluetooth (not included)
- TF/SD Card (optional, not included)
How to charge the Woofer speaker
Connect the provided cable to the speaker and plug the USB end into a power
source. Once you’ve done this, a red light will start glowing. This indicates
that the speaker is charging. The speaker is fully charged when the light on
the speaker goes out.
How to set up the device
Turn on the speaker by sliding the ‘Power’ button to ‘On.’ The speaker will
appear among your new Bluetooth connections on your phone as BRAINZ Speaker
S30. Click on it to connect your phone, and the speaker is ready for use.
Volume
To increase the volume, press and hold the + button on the top of the speaker.
To decrease the volume, press and hold the – button.
Switching between modes
Hold the ‘M’ button for 3 seconds to switch between modes (Bluetooth, USB,
AUX, or SD/TF).
USB
You can play your own music through the USB port. Insert a USB flash drive
into the designated access port of the Woofer speaker.
AUX
To use the AUX port, insert one end of your AUX cable into your phone and the
other end into the ‘AUX’ port of the speaker (this cable is not included). The
speaker will automatically switch to AUX mode and turn off Bluetooth.
SD
It’s possible to play music with your own SD card. Insert your SD card into
the ‘TF’ port.
Turning off
You can turn off the speaker by sliding the ‘Power’ button to ‘Off.’
Note:
Do not use a charger with a higher voltage than what is suitable for this
product.
This manual is valid for article number 38593.
For more information about this product, please visit : www.brainz-
electronics.nl
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>