DREO DR-HTF007S Smart Silent Tower Fan User Manual

June 14, 2024
DREO

Smart Tower Fan
USER MANUAL

DR-HTF007S Smart Silent Tower Fan

Thanks for Choosing DREO!
Your support means the world to us. We hope you enjoy our product as much as we did creating it.

EXTEND YOUR WARRANTY FOR FREE
Visit dreo.com/warranty to extend your warranty for free by registering your product. If you have any product issues, we always stand ready to help.

uk-support@dreo.com
www.dreo.com

FOLLOW US TO DISCOVER MORE
Find us on social media to stay connected and find new inspiration.
Join the Dreo community on Facebook: facebook.com/groups/dreohome

IMPORTANT SAFETY INSTRUCTIONS

**** READ ALL CAUTIONARY MARKINGS ON THE APPLIANCE AND SAFETY INSTRUCTIONS IN THE USER MANUAL BEFORE USE.

Do not cover the air inlet and outlet  while in operation. Do not use the fan naer flammables and combustibles.

General Safety

  1. The appliance can be used by children aged from 8 years and above and persons with reduced physical,sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a sale way and understand the hazards involved Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
  2. Use the appliance as described in the user manual only. Any other use not recommended in the user manual may cause fire, electrical shock, or personal injury. Ensure that the fan is switched off from the supply mains before removing the guard.
  3. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

Operation Safety

  1. Place the appliance on a flat, dry surface before use.
  2. Do not immerse in water and any other liquids.
  3. Do not use the appliance until the base is installed.
  4. Do not insert your fingers, pencil and any other objects into the grilles while in operation.
  5. Do not dismantle, repair, or modify. All servicing should be performed by qualified personnel.

Electricity Safety

  1. Make sure that the voltage of your electricity supply is the same as that  indicated on the appliance.
  2. Always unplug before cleaning or leaving the appliance unused for a long period of time. Keep your hands dry when plugging/unplugging.
  3. Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair.
  4. Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
  5. WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
  6. WARNING – If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

Wireless TechnologyKabellose Technologie: Wi-Fi
Operation Frequency Band(syBetriebsfrequenzband(en): 2412 ~ 2472MHz
RF Output Power/RF-Ausgangsleistung: 18.78 dBm
Hereby, Shenzhen Hesung Innovation Technology Co.,LTD, declares that this DR- HTFOO7S is in compliance with the essential requirements and other relevant provisions of RE Directive 2014/53/EU.Hiermit erklart Shenzhen Hesung Innovation Technology Co., LTD, dass DR-HTFOO7S den wesentlichen Anforderungen und anderen einschlagigen Bestim- mungen der RE Richtlinien 2014/53/EU.
Gentle Reminder:

Check the appliance regularly and refer to TROUBLESHOOTING or contact our customer support if it shows any of the following signs:
– Power cord or plug is damaged.
– Loud noise, unusual smell or excessive heat.
Specifications

Model DR-HTF007S
Input AC 220V-240V 50Hz
Rated Power 35W
Battery Type CR2025

ASSEMBLING YOUR TOWER FAN

Assembly Instructions
When using the appliance for the first time, remove the wraps and attach the Darts by following the steps below. DREO DR-HTF007S Smart Silent Tower
Fan - Assembly 1Keep two base halves in a crossed position, then insert pegs on one half onto the slots on the other half.DREO DR-HTF007S Smart Silent Tower Fan - Assembly
2 Press down on edges to click two base halves together.  Run the cord through the center hole.DREO DR-HTF007S Smart Silent
Tower Fan - Assembly 4Fit the base onto the bottom of the fan by aligning the arrows on the underside.DREO DR-HTF007S Smart
Silent Tower Fan - Assembly 5Rotate the base clockwise to lock in place.DREO DR-HTF007S Smart Silent Tower Fan - Assembly
6Thread the cord through the cord keepers before putting the fan upright.
DREO DR-HTF007S Smart Silent Tower Fan - Assembly 6 CAUTION
– Do not operate the tower fan if the base has not been installed.
– Make sure to thread the cord through all rear cord keepers.
Package ContentsDREO DR-HTF007S Smart Silent Tower Fan - Package
Contents

CONNECTING TO YOUR TOWER FAN

https://bc.dreo.com/app/?model=htf007s&region=eu
Before connecting the appliance to your mobile device, please scan the QR code on the left or go to the app store and search “Dreo”, then select and download the app. ** You can use the Dreo app to connect your smart tower fan to Amazon Alexa or Google Home. Please follow the in-app instructions to set up your voice assistant.
NOTE:** You must create a Dreo account to access voice assistants.

  1. Launch Dreo and sign in or create account by following in-app instructions.

  2. Enable Bluetooth on your mobile device and plug in your tower fan.

  3. Tap + Add Device and select the tower fan you want to link.

  4. Hold the Oscillation button   for 5 seconds to start WiFi connection settings.
    (Tip: The WiFi icon will keep flashing when pairing.)

  5. Follow in-app instructions to complete WiFi connection.

  6. You’re now ready to control the appliance on your app.
    (Tip: To restart connection settings, hold the Oscillation button again for 5 seconds.)

KNOWING YOUR TOWER FAN

Control Panel

Mode Button
Switch between NormalNaturaySieep/Auto Mode
Fan Speed Button
Adjust airflow volume (1-4 levels)
Power Button
Turn power on/offTim
Button
Select to set a timer (O-8h)
Oscillation Button
Adjust airflow direction
Long press and at the same time for 5s to reset to factory settings.
Note: When the fan Is on standby, long press the Mode button and Fan Speed button 10s to turn off WIFI connection and enter Low Power Standby Mode.
LED Display

DREO DR-HTF007S Smart Silent Tower Fan - LED Display NOTE:
– Display will turn off after 1 minute (after 5 seconds in sleep mode).
– Wake up the display with any button.![DREO DR-HTF007S Smart Silent Tower Fan

Getting the Most out of Your Tower Fan

  1. It’s not an air conditioner.
  2. Remove any tall obstacles that might block the airflow from the fan.
  3. Combine with your AC unit to get cooler air throughout the room.
  4. Position the tower fan closer to you to get more direct airflow.
  5. Place a bucket of ice in front of the fan for an extra cooling boost.

USING YOUR TOWER FAN

General OperationsDREO DR-HTF007S Smart Silent Tower Fan - General
Operations Working Modes
Sleep Mode (Mute Auto On)
Fan speed decreases every 30 minutes.
Speed decreases by two levels at most and will remain constant if at level 1:
For level 4: 4 3 2
For level 3: 3 → 2 1
For level 2: 2 1
For level 1: 1
Auto Mode
Fan speed adapts to the ambient temperature.
Normal Mode
Fan runs at the constant speed.
Natural Mode
Fan runs at alternating speeds.
Additional Features

| Timer
When the fan is ON/OFF, touch the timer button repeatedly to set a timer from 1 to 8 hours. When the timer ends, the fan will stop/start running automatically. To cancel, set the time to 0 hour.
Note: When the auto off timer is enabled, display will return to fan speed after 3 seconds.
---|---
| Mute
Method 1:
Short press the mute button on the remote control to turn on/off button sounds.
Method 2:
Long press the mode button on the control panel to turn on/off button sounds.
| Memory
If the fan is turned OFF or disconnected from power, it will operate under the previous settings (except the timer setting) when it is turned ON again.
| Firmware Update
Check the firmware version on the Dreo app and update reguarly for the fan to work more efficiently.
Display will show “UP” during the update process. Do not operate until the update is completed.

Remote ControlDREO DR-HTF007S Smart Silent Tower Fan - Remote
Control Battery ReplacementDREO DR-
HTF007S Smart Silent Tower Fan - Battery Replacement

  1. Press the locking button to popout the battery holder.
  2. Replace with the same battery type with the (+) side facing up.
  3. Push in the holder until securely locked into place.

Note: If the indicator on the remote control doesn’t turn on any more, please consider replacing the battery.

BATTERY WARNING
KEEP OUT OF REACH OF CHILDREN
Swallowing can lead to chemical burns, perforation of soft tissue, and death. severe burns can occur within 2 hours of ingestion. Seek medical attention immediately.

WARNING
Chemical Burn Hazard. Keep batteries away from children.
This product contains a lithium button/coin cell battery. If a new or used lithium button/coin cell battery is swallowed or enters the body, it can cause severe internal burns and can lead to death in as little as 2 hours. Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the battery, and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. The cells must be disposed of properly, including keeping them away from children. Even used cells may cause injury.

CLEANING AND MAINTENANCE

Outer Surface
Gently wipe off the dust with a soft, dry cloth. BaseDREO DR-HTF007S
Smart Silent Tower Fan - Base Press on the lock sign here and rotate counterclockwise to release the base from the fan, then press the tabs on the edges to detach the base halves from each other.
CAUTION

  1.  Always unplug the fan before any cleaning or maintenance to avoid the risk of fire, electric shock, or injury to persons.
  2. Do not immerse in water or get water inside the motor housing.
  3. Do not use any chemical agents when cleaning the fan.
  4. Store in a cool, dry place and cover it to protect from dust.

Rear Grille
WARNING
Turn off the appliance and unplug before any cleaning and maintenance.

  1. Remove the screw on the top of the rear grille with a Philips screwdriver.
  2. Lift up the grille and pull it out.
  3. Clean the dust on blades using a vacuum cleaner or air duster. Rinse the rear grille under running water or with a clean, damp cloth.
  4. Dry up, then install the grille and the screw back by following the reverse order of disassembly.

TROUBLESHOOTING

My fan won’t turn on!
Make sure that the cord is connected to a powered outlet and the mains voltage corresponds with the voltage indicated on the fan.
My fan is shaky and wobbling!

  1. Place the fan on a flat, level surface.
  2. Incorrect installation might also cause shakiness. Please refer to the assembly instructions in page 3-4 .Note that the power cord must be run through all rear keepers.

My fan is making vibration and noise!

  1. Place the fan on a flat, level surface.
  2. Be sure not to insert anything into the air inlet and outlet.

If your problem is not listed or still persists, please contact our Customer Support (see page 15)
Correct Disposal of this product
This marking indicates that this product should not be disposed of with other household waste throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources To return your used device, please use the return and collection system or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

DREO CUSTOMER CARE

Default 24-Month Warranty
This appliance is covered by Dreo warranty for 24 months from the date of its original purchase.
Extend Your Warranty
Extend your warranty by registering your new appliance on our website https://dreo.com/warranty.

The warranty will not apply in cases of:

  1. Accident, misuse, or repairs performed by unauthorized personnel.
  2. Any unit that has been tampered with or used for commercial purposes.
  3. Normal wear and tear of wearable parts.
  4. Use of force, damage caused by external influences.
  5. Damage caused by non-observance of the User Manual, e.g. connection to an unsuitable mains supply or noncompliance with the instructions.
  6. Partially or completely dismantled appliances.
  7. Defects caused by or resulting from damages from shipping or from repairs, service, or alteration to the product or any of its parts that have been perform ed by a repair person not authorized by Dreo.

We can only provide after-sales service for products that are sold by Dreo or Dreo authorized retailers and distributors. If you have purchased the appliance from a different place, please contact your seller for return and warranty issues.
uk-support@dreo.com
www.dreo.com

www.dreo.com
Shenzhen Hesung Innovation Technology Co., LTD
26F, Bldg A7, Creative City, Shenzhen, China

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals