SUNNY HEALTH FITNESS SF-T7705SMART Folding Incline Treadmill User Manual

SUNNY HEALTH FITNESS SF-T7705SMART Folding Incline Treadmill

IMPORTANT SAFETY INSTRUCTION

• When using an electrical appliance, basic precautions should always be followed, including the following:
• Read all instructions before using this treadmill.
• DANGER– To reduce the risk of electrical shock:
• Always unplug this appliance from the electrical outlet immediately after using and before cleaning.
• WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons:

1. The treadmill should never be left unattended when plugged in. Unplug from the outlet when not in use and before putting on or taking off parts.
2. Use this treadmill only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
3. Never operate this treadmill if it has a damaged cord or plug if it is not working properly, if it has been dropped or damaged, or dropped into water. Return this treadmill to a service center for examination and repair.
4. Keep the cord away from heated surfaces.
5. Never operate the treadmill with the air openings blocked. Keep the air openings free of lint, hair, and similar items.
6. Never drop or insert any object into any opening.
7. Do not use outdoors.
8. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
9. To disconnect, turn the treadmill off, then remove the plug from the outlet.
10. Connect this treadmill to a properly grounded outlet only. See grounding instructions.
11. This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Keep children under the age of 13 away from this machine.
12. Household use only.
13. REMOVE THE CONTROL BOX (OR KEY, OR SAFETY PIN, AS APPLICABLE) WHEN NOT IN USE, AND STORE IT OUT OF REACH OF CHILDREN.
14. Do not carry this appliance by supply cord or use the cord as a handle.

FCC Statement

CAUTION:
To avoid Injury, use extreme caution when stepping onto or off the running belt. Read the instruction manual before using it.
IC CAUTION: This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

IC Radiation Exposure Statement:
This equipment complies with Canada’s radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
SAVE THESE INSTRUCTIONS

We thank you for choosing our product. To ensure your safety and health, please use this treadmill correctly. It is important to read this entire manual before assembling and using the treadmill. Safe and effective use can only be achieved if the treadmill is assembled, maintained, and used properly. It is your responsibility to ensure that all users of the treadmill are informed of all warnings and precautions.

1. Before starting any exercise program, you should consult your physician to determine if you have any medical or physical conditions that could put your health and safety at risk or prevent you from using the treadmill properly. Your physician’s advice is essential if you are taking medication that affects your heart rate, blood pressure, or cholesterol level.
2. Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop exercising if you experience any of the following symptoms: pain, tightness in your chest, irregular heartbeat, shortness of breath, lightheadedness, dizziness, or feelings of nausea. If you do experience any of these conditions, you should consult your physician before continuing with your exercise program.
3. Keep children and pets away from the treadmill. The treadmill is designed for adult use only.
4. Use the treadmill on a solid, flat level surface with a protective cover for your floor or carpet. To ensure safety, the treadmill should have at least 8 feet (240CM) of free space behind it and 2 feet (60CM) on each side. Do not place the treadmill on any surface that blocks air openings. To protect the floor or carpet from damage, place a mat under the treadmill.
5. Ensure that all nuts and bolts are securely tightened before using the treadmill. The safety of the treadmill can only be maintained if it is regularly examined for damage and/or wear and tear.
6. Always use the treadmill as indicated. If you find any defective components while assembling or checking the treadmill, or if you hear any unusual noises coming from the treadmill during exercise, discontinue use of the treadmill immediately and do not use until the problem has been rectified.
7. Wear suitable clothing while using the treadmill. Avoid wearing loose clothing that may become entangled in the treadmill.
8. Do not place fingers or objects into the moving parts of the treadmill.
9. The maximum weight capacity of this unit is 220 lbs (100 kgs).
10. The treadmill is not suitable for therapeutic use.
11. To avoid bodily injury and/or damage to the product or property, proper lifting and moving are required.
12. Your product is intended for use in cool and dry conditions. You should avoid storage in extremely cold, hot, or damp areas as this may lead to corrosion and other related problems.
13. This treadmill is designed for indoor and home use only; it is not intended for commercial use!
14. Insert the power plug directly into the socket.
15. Read the manual before operating the treadmill.
16. Speed changes do not occur immediately. Set your desired speed using the adjustment keys on the main console. The speed will increase gradually.
17. While on the treadmill, move with caution as distractions may cause you to lose balance and stray from walking in the center of the running belt. This may result in serious injury.
18. This unit starts at a very low speed. To begin use, hold onto the handrails and stand on the side rails while it starts up, then step onto the running belt once it’s in motion.
19. Always hold the handrail when making changes in the settings.
20. A safety key is provided for emergency use. The treadmill will function only if the safety key is inserted into the console. In case of emergency, remove the safety key to immediately stop the running belt and shut off the treadmill. The display screen will reset once the safety key is reinserted.
21. The console control keys are precisely set and require very little finger pressure to use. To avoid damaging these keys, do not use excessive pressure when operating these controls.
22. This treadmill is designed for adult use only! Children should not be allowed to use or play near this treadmill. When present, children should always be supervised by an adult.
23. Women who are pregnant or nursing should consult a physician before attempting to begin any exercise program.
24. Always stay hydrated during and after exercise.

IMPORTANT NOTE: The running belt must be lubricated before the first use! Please see Page 10 for instructions on how to properly apply lubricant.

PRE-ASSEMBLY CHECKLIST

Before you start to assemble, please make sure all parts are included.

HARDWARE PACKAGE

Ordering Replacement Parts (U.S. and Canadian Customers only)

• Please provide the following information for us to accurately identify the part(s) needed:
• The model number (found on the cover of the manual)
• The product name (found on the cover of the manual)
• The part number found on the “EXPLODED DIAGRAM” and “PARTS LIST” (found near the end of the manual)

ASSEMBLY INSTRUCTIONS

• We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669).
• STEP 1: Open the carton and remove the contents. Place the Main Frame (No. A02) on level ground, and ensure that you have a work area that is clean and has adequate space.
• Do not cut the Packing Belt (No. F) until the assembly is complete!
• STEP 2: Loosen the Bolt (No. E09) on the Base Frame (No. A01) by using Allen Wrench (No. B04) and remove the Safety Block (No. B09).
• STEP 3: Lift the Console (No. D01) along with Left and right Upright Tubes (No. A04 & No. A05) upward (in the direction specified by the arrows on the diagram to the left).
• NOTE: When lifting, avoid puncturing the wires inside the Left and right Upright Tubes (No. A04 & No. A05) as this will cause damage.
• STEP 4: Support the Left and right Upright Tubes (No. A04 & No. A05) with your hands to prevent them from falling.
• Attach the Left and right Upright Tubes (No. A04 & No. A05) to the Base Frame (No. A01) using 6 Bolts (No. E09) and 6 Washers (No. E30). Secure by using Allen Wrench (No. B04).
• STEP 5: Attach the Console (No. D01) to the Left and right Upright Tubes (No. A04 & No. A05) by using 4 Bolts (No. E09) and 4 Washers (No. E30). Secure using Allen Wrench (No. B04).
• STEP 6: Attach the Left and right Upright Tube Covers (No. C20 & No. C21) to the Base Frame (No. A01).
• STEP 7: You may now cut the Packing Belt (No. F).
• Insert the pin end of the Safety Key (No. C26) into the Console (No. D01).
• The assembly is complete!
• IMPORTANT NOTE! You will need to lubricate your treadmill before the first use.

MAINTENANCE & CARE

• General cleaning will help prolong the life and improve the performance of your treadmill. Keep the unit clean and maintained by dusting the components regularly. Cleaning the two exposed sides of the Running Belt (No. C23) will prevent dust from accumulating underneath. Keep your running shoes clean so that dirt from the shoes does not wear the Running Board (No. D20) and Running Belt (No. C23). Clean the surface of the Running Belt (No. C23) with a clean damp cloth. Keep liquids away from electrical parts and the Running Belt (No. C23).
• To better maintain the treadmill and prolong its life, it is suggested that the treadmill be powered off for 10 minutes every 2 hours and fully powered off whenever not in use.

CENTERING THE RUNNING BELT:

• Place the treadmill on level ground and set it at 3-5 MPH to check if the Running Belt (No. C23) drifts from the center.
• If the Running Belt (No. C23) moves to the right, turn the right adjusting bolt ¼ turn clockwise, then turn the left adjusting bolt ¼ turn counter-clockwise. If the Running Belt (No. C23) does not move, repeat this step until it centers. Refer to Figure A.
• Over time, the Running Belt (No. C23) will loosen. To tighten the Running Belt (No. C23), turn the left & right adjusting bolts one full turn clockwise, check the tension of the Running Belt (No. C23). Continue this process until Running Belt (No. C23) is at the correct tension. Make sure to adjust both sides equally to ensure correct belt alignment. Refer to Figure C.

LUBRICATING THE TREADMILL

IMPORTANT NOTE:

• You will need to lubricate your treadmill before the first use.

RUNNING BELTS & TREADMILL LUBRICANT:

• Lubricating the Running Board (No. D20) and Running Belt (No. C23) is essential as friction affects the life span and operations of the treadmill. Inspect the Running Belt (No. C23) and Running Board (No. D20) regularly. If you find any wear on the
• Running Board (No. D20), please contact us at: support@sunnyhealthfitness.com.
• WARNING: Always unplug the treadmill from the electrical outlet before cleaning, lubricating, or
  repairing the unit.

HOW TO LUBRICATE:

1. Raise the Running Belt (No. C23) up on one side and apply lubricant to the Running Board (No. D20). Use a rag to thoroughly wipe the lubricant over the Running Board (No. D20). Repeat this process for the other side.
2. The moving parts should turn freely and quietly. Abnormal moving parts will affect the safety of the equipment. Inspect and tighten bolts regularly.
3. To better maintain the treadmill and prolong its lifespan, it is suggested that maintenance be done regularly.
4. DO NOT LOOSEN OR MAKE ANY ADJUSTMENTS TO THE RUNNING BELT WHILE APPLYING LUBRICANT. A loose Running Belt (No. C23) will result in the runner sliding off during use, while too tight of a Running Belt (No. C23) will negatively affect the motor’s performance and create more friction between the roller and Running Belt (No. C23). The most suitable tightness for the Running Belt (No. C23) is when it is pulled out 50-75mm from the Running Board (No. D20).

The following timetable is recommended:

• Light user (less than 3 hours/ week)
• Medium user (3-5 hours/ week)
• every six months
• every three months
• Heavy user (more than 5 hours/ week) every two months

FOLDING INSTRUCTIONS

FOLDING:

• NOTE: Please make sure the incline is at ZERO when folding and unfolding.
• Place your hand at position “P” and lift the Main Frame (No. A02) until the Air Pressure Cylinder (No. B05) “K” locks into the tube.
• When the Air Pressure Cylinder (No. B05) successfully locks into the tube, you will hear a clicking sound.

UNFOLDING:

• Before lowering the Main Frame (No. A02), ensure that the space directly underneath it is clear of any objects.
• Hold the Main Frame (No. A02) at position “P” with one hand. Next, using your foot, firmly push against the Air Pressure Cylinder (No. B05) “K” and press down on the Main Frame (No. A02).
• Once the Main Frame (No. A02) has been pushed down, it will automatically continue to steadily lower itself until it reaches level ground.
• (Please keep everyone and all pets away from the treadmill when unfolding the treadmill.)

HOW TO MOVE THE MACHINE

• Before attempting to move the treadmill, make sure that it has been properly folded. Unplug the power cord.
• To tilt, start by placing one hand at position “P” to support the top end of the treadmill. Next, place one foot at position “M” to hold the bottom end of the treadmill steady.
• With your foot at “M”, slowly tilt the top of the treadmill downward toward the ground. Once the treadmill reaches a low enough point, the transportation wheels of the treadmill will touch the ground.
• To transport, hold the treadmill at position “P” and tilt until the transportation wheel’s “M” can move on the ground.

IMPORTANT ELECTRICAL INFORMATION

• WARNING: This treadmill requires a power source of 10 amps (100-120V) to properly
  operate. For your safety, as well as the safety of others, please verify that the power source is correct before plugging in the equipment. Any power source above or below this level could cause significant damage to the equipment and/or user.
  GROUNDING METHODS:
  This product must be grounded. Grounding provides a path of the least resistance to electrical current to reduce the risk of electric shock. The plug must be plugged into an appropriate outlet that is properly installed and grounded under all local codes and ordinances. Ensure that the product is connected to an outlet that contains the same configuration as the plug. Do not use an adapter for this product.
  This product is for use on a nominal 100-120V circuit and has a grounding plug that looks like the plug illustrated in Sketch A.

DANGER:

• Improper connection of the equipment can result in the risk of electric shock. Check with a qualified electrician or serviceman if you are unsure whether the product has been properly grounded. Do not modify the plug provided with this product. If it will not fit the outlet, have a proper outlet installed by a qualified electrician.

WARNING!

1. NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. Route the power cord away from all moving parts of the treadmill, including the elevation mechanism and transportation wheels.
2. NEVER operate the treadmill using a generator or UPS power supply.
3. NEVER remove any cover on the treadmill without first disconnecting the power cord.
4. NEVER expose the treadmill to rain or moisture. This treadmill is not designed for outdoor use or use in any high-humidity environment.

GROUNDING METHOD

THE DISPLAY CONSOLE

QUICK START:

1. Insert the pin end of the Safety Key (No. C26) into the Console (No. D01).
2. Press the START button, and the system will automatically display a 3-second countdown. Once the countdown reaches zero, the Running Belt (No. C23) will start at the initial default speed of 0.5 MPH.
3. To adjust the speed, you can use the SPEED +/- BUTTONS or QUICK SPEED BUTTONS 2, 4, & 6 MPH.
4. To adjust the incline, you can use the INCLINE UP/DOWN BUTTONS or QUICK INCLINE BUTTONS 3%, 6%, &12%.

NOTE: The maximum speed on this treadmill is 9 MPH.

CONTROL FUNCTIONS:

1. Press the Speed Button to reduce the running speed.
2. Press the Speed Button to increase the running speed.
3. Press the Incline Button to reduce the incline level.
4. Press the Incline Button to increase the incline level.
5. Pressing a Quick Speed Button will adjust the speed to the corresponding speed indicated (2, 4, or 6 MPH).
6. Press the 3%, 6%, 12% Quick Incline Keys to instantly change the incline to 3%, 6%, 12%.
7. Pressing the Stop Button will stop the running belt of the treadmill.
8. Holding the Pulse Sensors located on the handles with both hands for 5 seconds will calculate and display the runner’s heartbeats per minute (BPM) on the computer display screen.

WINDOW DISPLAY:

• SPEED/ PULSE: The speed range is 0.5-9.0 MPH. 0.5 MPH is the default running speed.
• When the runner holds both hands on the pulse sensors (located on the handles), the system will calculate the runner’s heart beat and display it in this window. The pulse range is 50-200 beats/min.
• NOTE: This data is just for reference and cannot be used for medical purposes.
• TIME: Displays the time elapsed (0:00-99:59 MINS). If the time reaches 99:59, the treadmill will stop smoothly and display “End” then automatically reset to 0:00 after 5 seconds. When in Countdown Mode, it will count from the setting time to 0:00. When the clock reaches 0:00, the treadmill will stop smoothly and display “End” then automatically reset itself after 5 seconds.
• When in Countdown Mode, it will count from the setting time to 0:00. When the clock reaches 0:00, the treadmill will stop smoothly and display “End” then automatically reset itself after 5 seconds. Maximum Countdown time is 99:00 minutes: seconds.
• DISTANCE: Displays the distance traveled (0.0-99.9 MILES). When the clock reaches 99.9, it will reset to 0.00 and begin counting again from 0.0. When in Countdown Mode, it will count down from the setting data to 0.00. When it reaches 0.00, the treadmill will stop smoothly and display “End” and automatically reset to the initial setting after 5 seconds. When setting PROGRAMS, the speed is programmed in intervals; PROGRAMS are from P1-P9-FAT.
• CALORIES/INCLINE: Displays the number of calories burned from 0 to 999 KCAL and the incline level from 0-15. When the count reaches 999, it will reset and start back from 0. When in Countdown Mode, it will count down from the desired setting to 0. Once it reaches 0, the treadmill will stop smoothly and display “End”, then automatically reset to the initial setting after 5 seconds.
• STEPS: Counts steps that the user has walked. When it displays steps, it will count from 0 to 99999.
• When it reaches 99999, it will count again from 0.
• MATRIX: The matrix window will display a 0.25 MILES running track. Once you finish running the lap, the treadmill will beep and show the number of laps you’ve completed.

FUNCTION KEYS

• PROGRAM: Press the PROGRAM button to set your desired interval setting. Programs are displayed as P1-P9 and FAT and the various intervals are shown on the face of the treadmill. P1-P9 are preset programs.
• MODE: When stopped, press this button to select a Countdown Mode.
• 10:00 MINS is the set Countdown for TIME.
• 1.0 MILE is the set Countdown for DISTANCE.
• 50 KCAL is the set Countdown for CALORIES.
• When setting each Countdown Mode, you can press the speed +/– buttons to increase or decrease from the set data. Press START to start the treadmill.
• START: To start the treadmill, insert the pin end of the safety key into the console and then press the START button. This treadmill requires the safety key to start. 0.5 MPH is the default start speed.
• STOP/PAUSE: This button has functions of STOP and PAUSE. During running, press this button, and the treadmill will pause, and all data will be kept, a window will show “PAU”; Under pause mode, if you press the “START” button, the treadmill will continue to work. If you press the “STOP” button, the treadmill will stop and all data recover to the initial setting.
• SPEED +/– BUTTONS: Press the +/- buttons to increase or decrease the speed in increments of 0.1 MPH. Pressing and holding either of these buttons for a duration of over ½ of a second will increase or decrease the speed continually.
• INCLINE UP/DOWN BUTTONS: Press this button to adjust the incline. When the treadmill is running, press the Up & Down buttons to increase or decrease the incline in increments of 1/time. Pressing and holding either of these buttons for a duration of over ½ a second will increase or decrease the incline continually. The incline levels range from 0-15.
• 2, 4, & 6 (QUICK SPEED BUTTONS): These buttons are preset to 2, 4, or 6 MPH speeds for convenience.
• QUICK INCLINE BUTTONS 3%, 6%, 12%: These buttons are quick incline presets that allow you to select an automatic running incline of 3%, 6%, and 12% instantly with a push of a button.

APP CONNECTION:

1. Scan the QR code below to download the SunnyFit app onto your mobile device.
2. If this is your first time using the SunnyFit app, follow the in-app instructions to register for your free SunnyFit account and log in.
3. Ensure that the Bluetooth function is turned on from your mobile device.
4. To connect the equipment to the SunnyFit app:
   • a. From the “Workout” tab, press on the “Search” button to search for your equipment.
   • b. Once your equipment appears on the list, tap the “Select” button to confirm.
   • c. Note: If your equipment does not appear on the “Searching for Equipment” list, check the
   • EXERCISE CONSOLE on your equipment to ensure that it is not in sleep mode and your phone’s Bluetooth function is on, then tap “Retry” to search again.
   • d. Once your equipment shows up on the “Workout” tab as “Currently Selected”, your equipment is now ready to display, track, and record your equipment’s workout stats on the app!
5. If you are unable to replicate these steps or have any other issues with the SunnyFit app, please contact SunnyFit support at support@sunnyfit.com, or use the in-app “Contact Us” form to request support (“Me” tab -> “Contact Us”).

LUBRICATION REMINDER:

• Your treadmill needs lubrication maintenance every 188 MILES. The system will release a beeping sound every 10 seconds and display an “OIL” icon on your LCD display to remind you when it’s time.
• Please read the LUBRICATING THE TREADMILL on Page 10 to learn the proper steps to lubricate your treadmill. Apply the lubricant to the middle of the running board on both sides. After application,
• press and hold the STOP button for 3 seconds to clear the “OIL” reminder.

INTERVAL PROGRAMS (P1-P9):

• Press the PROGRAM button to select an interval setting. Programs are displayed as P1-P9. Select the desired program, and the console will display a countdown starting from 10:00 MINS, press SPEED+/- or INCLINE UP/DOWN buttons if you wish to increase or decrease the exercise time. Press the START button to start the interval program. The interval program is divided into 10 sections. Each exercise time equals the setting time divided by 10. When the speed enters the next interval, the treadmill will beep, and the speed will be changed according to the set interval. Press SPEED +/- or INCLINE UP/DOWN buttons to change the SPEED and INCLINE. After finishing one program, the system will beep and display “End”. The treadmill will gradually come to a stop, then automatically reset to the initial setting after 5 seconds.

| TIME INTERVAL= setting time/10
---|---
1| 2| 3| 4| 5| 6| 7| 8| 9| 10
P1| SPEED| 1.2| 2.5| 1.8| 2.5| 1.8| 3.1| 2.5| 1.2| 3.1| 1.8
INCLINE| 1| 2| 3| 3| 1| 2| 2| 3| 2| 2

P2

| SPEED| 1.2| 3.1| 2.5| 3.7| 2.5| 3.7| 2.5| 1.2| 2.5| 1.2
INCLINE| 1| 2| 3| 3| 2| 2| 3| 4| 2| 2

P3

| SPEED| 1.2| 3.1| 2.5| 3.1| 2.5| 3.1| 2.5| 1.2| 1.8| 1.2
INCLINE| 1| 2| 2| 3| 1| 2| 2| 2| 2| 1

P4

| SPEED| 1.8| 3.7| 4.3| 3.1| 5| 3.1| 5.6| 3.7| 2.5| 1.8
INCLINE| 2| 2| 3| 3| 2| 2| 4| 6| 2| 2

P5

| SPEED| 1.8| 3.7| 4.3| 3.1| 5| 3.7| 4.3| 3.7| 2.5| 1.8
INCLINE| 1| 2| 4| 3| 2| 2| 4| 5| 2| 1

P6

| SPEED| 1.2| 5| 3.7| 2.5| 3.1| 5.6| 4.3| 3.1| 2.5| 1.8
INCLINE| 2| 2| 6| 2| 3| 4| 2| 2| 2| 1

P7

| SPEED| 1.2| 3.7| 4.3| 2.5| 2.5| 4.3| 2.5| 1.2| 2.5| 1.2
INCLINE| 4| 5| 6| 6| 9| 9| 10| 12| 6| 3

P8

| SPEED| 1.2| 2.5| 3.7| 5| 4.3| 5| 3.7| 1.2| 1.8| 1.2
INCLINE| 3| 5| 4| 4| 3| 4| 4| 3| 3| 2

P9

| SPEED| 1.2| 2.5| 3.1| 3.1| 3.7| 3.1| 3.7| 1.8| 1.8| 1.2
INCLINE| 3| 5| 3| 4| 2| 3| 4| 2| 3| 2

BODY MASS INDEX:

• Press the PROGRAM button until the window displays FAT to access Body Mass Index. Press MODE to enter F-1, F-2, F-3, F-4, F-5.
• F-1 SEX, F-2 AGE, F-3 HEIGHT, F-4 WEIGHT, F-5 is Body Mass Index
• Press SPEED +/- buttons to set F1-F4 (refer to the chart below). Once you have finished setting F1-F4, press MODE. This will enter you into the set up for F-5 (Body Mass Index). To set F-5, hold the pulse sensors located on the handrails with both hands and hold them for 3 seconds. The window will display your Body Mass Index. The Body Mass Index is used to test the relation between your height and weight. It is only for reference not suitable for the medical use. The Body Mass Index is suitable for both male and female.
• NOTE: General Body Mass Index score is 20-25%
• Underweight Below 19.0
• Normal 19.0 – 25.0
• Overweight 26.0 – 29.0
• Obesity 30.0 – and above

BODY MASS INDEX (BMI) CHART:

TREADMILL FUNCTIONS

SAFETY LOCK FUNCTION:

• Removing the Safety Key (No. C26) from the console while the treadmill is running will cause it to stop immediately. Once the treadmill reaches a full stop, the window display of the console will show “- – -” and the buzzer will beep 3 times. To start the treadmill again, insert the pin end of the Safety Key (No. C26) into the console and press the START button.

POWER SAVE FUNCTION:

• When the treadmill has been inactive for 10 minutes, it will enter Power Saving Mode. While the treadmill is in this mode, the window display of the console will be turned off. To turn it back on, press any button.

POWER ON:

• Flick the power switch to this symbol to turn on the treadmill.

POWER OFF:

• Flick the power switch to this symbol to turn the treadmill off at anytime. This includes during exercise.

SAFETY NOTE:

• We recommend that you maintain a slow speed at the beginning of a session and hold the handrails until you have become familiar with the treadmill.
• Insert the pin end of the Safety Key (No. C26) into the Console (No. D01) and attach the opposite end (containing the safety clip on it) to your clothing before starting your workout. To end your workout, press the STOP button or remove the Safety Key (No. C26) and the treadmill will stop immediately.

EXERCISE INSTRUCTIONS

GETTING STARTED:

• Before starting any exercise program, you should consult your physician to determine if you have any medical or physical conditions that could put your health and safety at risk or prevent you from using the equipment properly.
• Be aware of your body’s signals. Incorrect or excessive exercise can damage your health.
• Stop exercising immediately if you experience any of the following symptoms: pain, tightness in your chest, irregular heartbeat, shortness of breath, lightheadedness, dizziness, or feelings of nausea.
• Get to know your treadmill. Before attempting to use the treadmill take some time to stand alongside and familiarize yourself with the controls.

1. Once you get on, you can stand with your feet on the side rails and stabilize yourself by holding onto the handrails.
2. Next, attach the clip end of the Safety Key (No. C26) to your clothes and insert the magnetic end of the key into the Console (No. D01).
3. Press the START button to start the treadmill.
4. The treadmill will start at the system default setting speed of 0.5 MPH. When you feel comfortable, you may slowly increase this speed.
5. When you are finished with your exercise, press the STOP button to stop the treadmill or you can remove the pin end of the Safety Key (No. C26) to stop the treadmill.

TROUBLESHOOTING

of the rear roller (See page 9).
Computer not working| Wires from the console and bottom control board are not properly connected.| Check wire connections from the console to the bottom control board.
Transformer is damaged.| If the transformer is damaged, contact customer service.
E01    or    E13:    Message failure| Wires from the console and bottom control board are not properly connected.| Check wire connections from the console to the bottom control board. If the wire has been punctured or damaged, you will need to replace it. If the problem is not rectified, you may need to replace the control board.
E02:          Burst          clash protection| Incoming voltage is lower than 50% of the required voltage.| Check that the incoming power supply is the correct voltage.
E03: No speed sensor signal| Speed sensor signal cannot be received by the control board.| Check that the sensor wire is properly connected. If damaged, replace wire. Check to see if the magnetic sensor is damaged, replace if necessary.
E05: Current overload protection (Self Protecting System)| The incoming voltage is too low or too high. The control board is damaged.| Restart the treadmill. Check the incoming voltage to ensure it’s correct. Check the control board, replace if damaged.
A moving part of the treadmill is stuck and therefore, the motor is unable to rotate properly.| Inspect moving parts of the treadmill to ensure that they are operating correctly. Check the motor, listen for strange noise and check for a burning smell. Replace the motor if necessary.
E06: Motor Abnormality| The motor wire is not connected, or the motor is damaged.| Check motor wires to see if the motor is connected. If the wire has been punctured or damaged, you will need to replace it. If the problem is not rectified, you may need to replace the motor.
---|---|---
E08: Control Board Abnormality| The control board is  not connected.| Check the upper and middle wires to see if the control board is connected. If the wire has been punctured or damaged, you will need to replace it. If the problem is not rectified, you may need to replace the control board.
E10: Motor Abnormality| The motor is damaged, or a moving part of the treadmill is stuck and therefore the motor is unable to rotate properly.| Inspect moving parts of the treadmill to ensure that they are operating correctly. Replace the motor if necessary.

• NOTE: If you are unable to resolve an issue using the troubleshooting guide above, please contact Customer Service at support@sunnyhealthfitness.com.

EXPLODED DIAGRAM

PARTS LIST

• CONNECT WITH US FOR FITNESS ARTICLES, VIDEOS & WORKOUTS
• WWW.SUNNYHEALTHFITNESS.COM
• support@sunnyhealthfitness.com

Documents / Resources

| SUNNY HEALTH FITNESS SF-T7705SMART Folding Incline Treadmill [pdf] User Manual
SF-T7705SMART Folding Incline Treadmill, SF-T7705SMART, Folding Incline Treadmill, Incline Treadmill, Treadmill
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>