SoundCore Flare Mini Gen 2 Portable Speaker A3167012 User Manual

SoundCore Flare Mini Gen 2 Portable Speaker A3167012

USER MANUAL

At a Glance

① Power Button
② Light Effects Button
③ Volume Up Button
④ Multi-function Button
⑤ Micro-USB Charging Port
⑥ Microphone
⑦ Volume Down Button
⑧ Bluetooth Button

Charging

• Use a certified micro-USB charging cable and charger to prevent any damage.
• Fully charge this speaker before the first use to prolong the lifespan of the builtin battery.
• Disconnect this speaker from the charger when fully charged. Do not charge for extended periods.

Powering On/Off

• This speaker will power off automatically after 30 minutes if no device is connected.

Using Your Speaker

Bluetooth Mode

With this speaker, you can enjoy music through your Bluetooth-enabled devices.

• This speaker can pair with up to 2 mobile devices via Bluetooth. To pair with another Bluetooth device, press the Bluetooth button to re-enter Bluetooth pairing mode.
• This speaker can only connect and play music on one mobile device at a time.
• Each time you power on your Soundcore speaker, it will automatically connect to your last connected device if available within the Bluetooth range. If not, press the Bluetooth button to enter Bluetooth pairing mode.

TWS (True Wireless Stereo) Mode

Two identical Soundcore Flare Mini speakers can pair up with each other for true wireless stereo sound.

Note: Unavailable between a new generation speaker and an old one.

1. Connect one Soundcore speakers with your smartphone or tablets.
2. On both Soundcore speakers, press and hold the Bluetooth button for 2 seconds to enter TWS pairing mode.
→ The speakers start searching for each other to establish the TWS connection.

• To exit the TWS mode, press and hold the Bluetooth button for 2 seconds.

Button Controls

Light Effects

This speaker is equipped with light effects for a party mood.
Press the light effect button to turn on or switch among multiple music-sync light effects.
To turn the light effects off, press and hold the light effect button for 2 seconds.

• You can also check all available light effects in the Soundcore app.

Soundcore App

Download the Soundcore app to enhance your experience.

Product information: Check the product name and software version, or read the user manual.
Firmware update: You will be informed once a new version of firmware is detected when you connect the speaker with the app.

Battery status: Indicates the remaining battery level of your speaker.
Volume control: Adjust the volume level via the app without pressing the buttons on the speaker.
EQ settings: There are 4 EQ settings you can choose from in the app to optimize your experience while enjoying different music genres.

• Soundcore Signature: Normal EQ mode with well-balanced sound.
• Voice: Voices stand out more clearly from other ambient sounds.
• Balance: No enhancement for high-frequency and low-frequency sounds.
• Treble Boost: High frequencies are enhanced.

Set Auto-power off time: Set an auto-power off time (5/10/30/60 minutes, 30 minutes by default), the speaker will automatically power off when time is up.
Light effects: Besides the music-sync light effects (Phasing beats, Bouncing beats, Party), you can also choose your favorite light effects (Chill, Energy, Bedtime, Spring) from in the app.
Voice prompt: Mute or restore the voice prompt while powering on/off.

Reset

You might need to reset this speaker when you encounter any connection problems or function issues.
Press and hold the Bluetooth Button and Volume + Button for 2 seconds simultaneously.

Specifications

Specifications are subject to change without notice.

DOWNLOAD

SoundCore Flare Mini Gen 2 Portable Speaker A3167012 User Manual – [Download PDF]

SoundCore Flare Mini Gen 2 Portable Speaker A3167012 QSG – [Download PDF]

A3167 Soundcore Flare Mini Declaration of Conformity – [Download PDF]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>