PHILIPS 46677582876 Selectable Color Temperature Integrated LED Flush Mount Instruction Manual
- June 14, 2024
- Philips
Table of Contents
PHILIPS 46677582876 Selectable Color Temperature Integrated LED Flush
Mount
Manual Part A 01
Installation
INSTALLATION OR ASSEMBLY INSTRUCTIONS
SAFETY INSTRUCTIONS
- This manual B contains definitions of all potentially applicable parameters & specifications with icons, as per International norms and safety standards.
- However not all of them may apply to the product you purchased – please refer to the icons on the additional Manual A, for the ones that are particularly applicable to this product.
- To ensure correct and safe installation, usage, and functioning of the product, always follow these instructions carefully and keep them for future reference.
- Always switch off the power before installation, maintenance, or repair activities.
- Always consult a professional in advance, for choosing the right fastener for a secure mounting of the product. Take into account the weight of the product and the material of the mounting surface.
- If in doubt, consult a qualified or licensed electrician or contact your retail outlet. Ensure the product is always installed according to relevant regulations. Certain regulations indicate that electrical products must be installed only by a licensed electrician (e.g. ANSI/NFPA 70, and the
- Canadian Electrical Code, Part I, in nonhazardous locations).
- Always tighten the terminal screws firmly. It is highly recommended to regularly check and re-tighten the terminal screws over time.
- Maintain interior lighting with a dry cloth duster, do not use abrasives or solvents. Avoid liquids on all electrical parts.
- If the product is mounted on a metallic surface, this surface must be bonded to the protective earth conductor or the equipotential bonding conductor of the installation.
- Always consider all technical specifications of the product. Verify the stated icons on the identification label on the product and the icons shown in part A of these safety instructions.
- Keep packaging materials out of children’s reach. (e.g. plastic bags,…)
- ATTENTION: Below you will find all the explanations with numeric references to the icons in front of these safety instructions:
- The product should only be installed indoors.
- Alterations in design and technical specifications are reserved.
MIN 75°C SUPPLY CONDUCTORS
- CAUTION – RISK OF FIRE THIS PRODUCT MUST BE INSTALLED UNDER THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
- Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips.
- N.V. and are used under license Signify North America Corporation 400 Crossing Blvd, Suite 600 Bridgewater, NJ 08807, USA © 2023 Signify Holding Signify
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>