jibe JCL102 LED Downlight User Guide
- June 4, 2024
- jibe
Table of Contents
jibe JCL102 LED Downlight
Introduction
JCL102 LED recessed downlight adopts super slim and compact design, perfectly suitable for the narrow ceiling installation. IP65 rating front cover design, suitable for damp environment. Traditional diamond plaited surface lens design ensures the high light transmittance and uniform lighting output. T-shape heat sink greatly increases the radiation area and improves cooling efficiency. The fitting could be rotated from 0 to 30 degree in horizontal direction, which can expand the illumination area.
- Up to 70% energy saving compared to standard CFL
- Long lifetime of 40,000 hours
- Triac dim, 0-10V dim, DALI dim
- 36°/60° wide beam angle
- Ø68-72mm cutout
- CCT: 2700K 3000K 4000K 5000K
- No UV/IR light
- Environment friendly, without Mercury or any other hazardous substances
Application notes
- Professional electrician for installation only
- Switch off before installation
- Do not touch when in use
- Keep away from hot steam and corrosive gas
Application Areas
It is designed for general lighting applications in offices, supermarkets, shops, schools, hotels, etc. It is also widely used for public areas, such as stairways, lobby, reception, corridors, etc.
Product Information
Technical Specifications
Model| Voltage| Power| Power Factor| Lumen
(±5%)| Beam angle| CCT| Lifespan| CRI|
Dimmable| Dimension
---|---|---|---|---|---|---|---|---|---|---
JCL102A-2.5-5W| AC230V| 5W| ≥0.9| 465| 36°/60°| 2700K| 40000h| ≥80| No|
Ø8030mm cutout Ø68-72mm
JCL102A-2.5-5W| AC230V| 5W| ≥0.9| 480| 36°/60°| 3000K| 40000h| ≥80| No|
Ø8030mm cutout Ø68-72mm
JCL102A-2.5-5W| AC230V| 5W| ≥0.9| 530| 36°/60°| 4000K| 40000h| ≥80| No|
Ø8030mm cutout Ø68-72mm
JCL102A-2.5-5W| AC230V| 5W| ≥0.9| 530| 36°/60°| 5000K| 40000h| ≥80| No|
Ø8030mm cutout Ø68-72mm
JCL102A-2.5-5W-D| AC230V| 5W| ≥0.9| 460| 36°/60°| 2700K| 40000h| ≥80| Yes|
Ø8030mm cutout Ø68-72mm
JCL102A-2.5-5W-D| AC230V| 5W| ≥0.9| 475| 36°/60°| 3000K| 40000h| ≥80| Yes|
Ø8030mm cutout Ø68-72mm
JCL102A-2.5-5W-D| AC230V| 5W| ≥0.9| 525| 36°/60°| 4000K| 40000h| ≥80| Yes|
Ø8030mm cutout Ø68-72mm
JCL102A-2.5-5W-D| AC230V| 5W| ≥0.9| 520| 36°/60°| 5000K| 40000h| ≥80| Yes|
Ø8030mm cutout Ø68-72mm
JCL102A-2.5-5W| AC230V| 5W| ≥0.9| 345| 36°/60°| 2700K| 40000h| ≥90| No|
Ø8030mm cutout Ø68-72mm
JCL102A-2.5-5W| AC230V| 5W| ≥0.9| 370| 36°/60°| 3000K| 40000h| ≥90| No|
Ø8030mm cutout Ø68-72mm
JCL102A-2.5-5W| AC230V| 5W| ≥0.9| 410| 36°/60°| 4000K| 40000h| ≥90| No|
Ø8030mm cutout Ø68-72mm
JCL102A-2.5-5W| AC230V| 5W| ≥0.9| 380| 36°/60°| 5000K| 40000h| ≥90| No|
Ø8030mm cutout Ø68-72mm
JCL102A-2.5-5W-D| AC230V| 5W| ≥0.9| 345| 36°/60°| 2700K| 40000h| ≥90| Yes|
Ø8030mm cutout Ø68-72mm
JCL102A-2.5-5W-D| AC230V| 5W| ≥0.9| 365| 36°/60°| 3000K| 40000h| ≥90| Yes|
Ø8030mm cutout Ø68-72mm
JCL102A-2.5-5W-D| AC230V| 5W| ≥0.9| 400| 36°/60°| 4000K| 40000h| ≥90| Yes|
Ø8030mm cutout Ø68-72mm
JCL102A-2.5-5W-D| AC230V| 5W| ≥0.9| 375| 36°/60°| 5000K| 40000h| ≥90| Yes|
Ø8030mm cutout Ø68-72mm
Driver data Sheet
| Driver data | DIM | Non dim |
|---|---|---|
| Input rated Voltage | AC230V | AC230V |
| Frequency | 50Hz | 50Hz |
| Input Voltage | AC200-240V | AC200-240V |
| Efficiency | ≥78% | ≥78% |
| Total load Wattage | 5W±0.5W | 5W±0.5W |
| Power Factor | ≥0.9 | ≥0.9 |
| Rated input current | ≤0.028A | ≤0.03A |
| Full load output Voltage | DC28-38V | DC28-40V |
| Rated output current | 130mA | 130mA |
| Output current range | 130mA±5% | 130mA±5% |
| Power tolerance | ±5% | ±5% |
| Current output tolerance | ±5% | ±5% |
| Dimming range | 8%-100% | — |
| Dimmer | Triac dimmers | — |
| Short circuit protection | PASS | PASS |
| Over voltage protection | PASS | PASS |
| Over temperature protection | PASS | PASS |
| THD | ≤20% | – |
| Withstand voltage | AC3750V | AC3750V |
Fixture Compatibility
Rated Wattage| Electrical Classification| Ingress Protection|
Operating Temp| Operating Humidity| Storage Temp
---|---|---|---|---|---
5W| Ⅱ| IP65| -20oC~45oC| 0~90%| -20oC~65oC
Spectral Distribution
Photometric Diagram
Polar Diagram Comparison
Driver lifetime & LED light decay rate
Temperature
- The testing is operated at 25°C
- The lifetime of capacitor, minimum of 5,000 hours if operated at 105°C, will be doubled whenever the temperature drops 10°C
- The highest withstand temperature of IC, MOS could be 120°C
- The highest withstand temperature of LED junction temperature is 150°C
Installation
Install requirements
A-gap above the fitting| 25mm
B-gap to the building material| 25mm
C-gap to the thermal insulation| 50mm
1. Open a hole according to the cutout size of led downlight.
|
2. Use screw-driver to open the driver terminal cover, feed the main AC wire L. N. in terminal block respectively, then fix the cover back.
---|---
3. Connect the downlight with driver, hold back the spring clip then push the downlight into the hole.
| 
4. Make sure the downlight fixed tightly in ceiling, turn on the power (Fig 1).
Packaging Information
|
SIZE(CM)
| N.W/pc (KGS)|
G.W.(KGS)
|
Q’TY(PCS)
---|---|---|---|---
Carton
|
52.552.515
|
0.24
|
15
|
50
| CTNS| Q’TY(PCS)| VOLUME(CBM)
---|---|---|---
20” standard
container
| 660| 33000| 28
40” standard
container
| 1320| 66000| 56
www.jibe.lighting [email protected]
© 2019 Jibe Lighting – all rights reserved
Jibe reserves the right to alter material, dimensions and characteristics
without prior notice.
Read installation instructions carefully. Technical information on the
installation instruction has precedence over the information in the brochure.
Our general terms and conditions shall apply notwithstanding any stipulation
to the contrary to all the orders and agreements with Jibe.
You can obtain a copy of these conditions on demand.
For latest information and specifications of the full product range
visit www.jibe.lighting
JIBE LIGHTING — HEADQUARTERS Hogebrinkerweg 14V – 3871 KN Hoevelaken
Netherlands Tel : +31 (0)33 844 7111
[email protected] –
www.jibe.lighting