JIBE SR-SB9001K8-CCT RF+Bluetooth CCT Wall Mounted Remote Instructions
- June 6, 2024
- jibe
Table of Contents
JIBE SR-SB9001K8-CCT RF+Bluetooth CCT Wall Mounted Remote
Function introduction
Product Data
| Output | RF+Bluetooth signal |
|---|---|
| Operation Frequency | 2.4GHz |
| Power Supply | 3V(1xCR2450 battery) |
| Operating temperature | 0-40°C |
| Relative humidity | 8% to 80% |
| Dimensions | 80x80x13.6mm |
- RF+Bluetooth CCT remote
- Control 1 zone of RF+Bluetooth receiver
- Enables to save and recall 2 scenes for each zone
- Easy & quick pairing to the RF+Bluetooth receivers by simply pushing the buttons
- Mesh network for further control distance, receivers can transmit signal to each other
- Each remote can control numerous receivers
- Each receiver can be paired to max. 8 remote controls
- The controlled receiver status can be quickly synchronized to the smart APP
- Transmission range between every two neighbor devices up to 30m
- Bluetooth low power consumption technology, long battery life
- Waterproof grade: IP20
Safety & Warnings
- This device contains a button lithium battery that shall be stored and disposed properly.
- DO NOT expose the device to moisture.
Pair with RF+Bluetooth receiver
Installation
- Remove battery insulator
- Install the controller to wall(2 methods)
Method 1: Stick 3M glue on the back of the bracket and then stick the bracket to the wall
Method 2: Screw the bracket to the wall
After the bracket is fixed,clip the frame and control part to the bracket in sequence
The key part of this controller is a universal, standard size design switch element that can be integrated in numerous frames by different manufacturers as below list:
- BEKER: S1, B1, B3, B7 glass
- GIRA: Standard55, E2, Event, Esprit
- JUNG: A500, Aplus
- MERTEN: M-smart, M-Arc, M-Plan
Read User Manual Online (PDF format)
Loading......