DRACOOL B09P17N7C9 Bluetooth Keyboard With Touchpad Instruction Manual

DRACOOL B09P17N7C9 Bluetooth Keyboard With Touchpad

Product Overview

Note:
Please adjust the keyboard within the allowed angle range as shown in the’, picture below. Otherwise it can be damaged.

1. Power ON/OFF
   Power ON: Toggle the switch to ON. The blue indicator will be on and then go off in 1 second, which indicates the keyboard has been turned on. After the keyboard is turned on, 7 colors of backlight will display in turn and then back to the color and brightness of last time use.
   Power OFF: Toggle the switch to OFF to power off the keyboard.

2. Pairing
   Step 1: Toggle the switch to ON. The blue indicator will be on and then go off in 1 second, which indicates the keyboard has been turned on.
   Step 2: Press the + simultaneously for 3 seconds. The indicator 3 will flash in blue, which indicates the keyboard is under pairing mode.
   Step 3: On the iPad, select Settings – Bluetooth – On. The iPad will display “Dracool Keyboard S” as an available device.
   Step 4: Select “Dracool Keyboard S” on iPad.
   Step 5: The indicator 3 will be on and lasts for 3 seconds and then it goes off, which means the keyboard has been paired successfully with iPad. If failed, it will be off in 3 minutes.

Note:

1. After a successful pairing, the Bluetooth keyboard will pair the iPad automatically next time. However, when interference occurs or the Bluetooth signal on iPad is unstable, the automatic pairing might fail. In the case, please ‘ do as following.
   • Delete all Bluetooth pairing records related to “Dracool Keyboard S” on your iPad.
   • Turn off Bluetooth on your iPad.
   • Follow pairing steps again to connect.
2. Touch the trackpad cannot wake up the keyboard in sleeping mode. To, wake it up, just press one of the keys please.

Keys and Function

Press and hold the key and another key simultaneously to perform a keyboard shortcut action. For example, to turn off the sound: Press and hold ,,then press

Touchpad Function

Notice: Please make sure bluetooth is connected and touchpad function is turned on!
Press key and at the same time to enable / disable the touch pad function.

Support gestures on iPadoS 14.5 or upgraded version, functions as below:

Press and hold the App with one hand, and then swipe with another hand to Drag Apps

Charging

When the battery is too low, the indicator will flash in red, and you need to charge it. You can use a regular cellphone charger to charge the keyboard or connect it to the USB port of a computer. It takes up to 3.5 hours for the keyboard to be fully charged.

1. It is NOT recommended using a Fast Charger to charge the keyboard.
2. The red indicator will be on when the keyboard is in charging, and goes off when charging ends.

Sleeping Mode

1. When the keyboard is left idle for 3 minutes, the backlight turns off automatically.
2. When the keyboard is left idle for 30 minutes, it goes into deep sleeping mode. The Bluetooth connection will be disrupted. The connection recovers if you press any key on the keyboard.

Product Specifications

Package Content

• 1 * Backlit Bluetooth Keyboard for iPad Air 4 10.9 2020 (4. Gen) / iPad Pro 11 2021/2020/2018 (3.Gen/2.Gen/1.Gen)
• 1 * USB C Charging Cable
• 1 * User Manual

Thank you very much for purchasing this backlit wireless Bluetooth keyboard.
Please email us if you have any questions about this product. We will do our best to assist you.
Email: support@dracool.net

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>