HumanCentric 101-1015-V2 VESA Mount Adapter Bracket Instruction Manual
- June 14, 2024
- HumanCentric
Table of Contents
HumanCentric 101-1015-V2 VESA Mount Adapter Bracket
WARNING
To reduce the risk of injury to persons, read all important precautions and
warnings listed below. HumanCentric assumes no responsibility for personal
injury or property damage sustained by or through the use of this product:
- Read all instructions carefully.
- Incorrect installation may lead to damage or serious injury. Ensure the product is secured before use.
- If using a VESA stand or VESA arm, ensure it can support the combined weight of the bracket, monitor, and any mounted devices.
VESA Mount Adapter for Acer™ Monitors
- Model 101-1015-V2cks.
- Tools needed for installation
- Phillips head screwdriver
- A friend to help you hold the monitor (recommended)
Compatible with models
- Fits Acer™ models R240HY bids (Does not R240HY Abmidx), SB220Q, RT240Y, R221Q, R231bmid, RT270, G227HQL, G237HL, G257HL, G257HU, G247HYL
Additional models may also be compatible. Check our online listings for the most recent compatibility updates
Warning
Depending on your model, the stand may look different. Do not unscrew the base
or stand part to remove it.
REMOVE BASE FROM MONITOR
To remove the monitor neck, press down on the top of the monitor neck until it releases. You may need to apply a lot of pressure.
ATTACH BRACKET TO MONITOR
Side tre is got let it to at our pored.
ATTACH MONITOR/BRACKET ASSEMBLY TO VESA MOUNT.
Use the four included VESA screws to attach the adapter bracket to the VESA
mount.
Note: You should have a friend hold the monitor while you affect it to
the VESA mount