N S KEY C2800T Digital Cabinet Lock User Manual

N S KEY C2800T Digital Cabinet Lock User Manual

Before Operation

The locker has 3 levels of p remission: Top level: Owner code • 1.

Secondary level: Master code •1. Service code • 1

Basic level: Temporary code • 1 User code • 10

Working mode: Public mode & Private mod e.

All code can be copied lo other locker by 1996 1B c arid, except Tempera rye code.

All code must be set as 4. 9 digits.
It will not au tome tidally lock after Owner code, Master code & Temporary code unlocked.
It will automatically lock after U seer code & Service code unlocked.

Product Components

The product components may change depending on the installation environment.

Reset Pins of Outdoor Body

I Names of Individual Parts (Outdoor Body)

Names of Individual Parts (Indoor Body)

Setting

Reset

To short the reset pins of PCB and hold until white light is bright and 3 sounds beep. After resetting, all code will be deleted and the Owner code revert lo 123456 and in public mode.

Change Owner code

1. Touch the keypad and enter two random code.
   If Riri: I+!,,■ ..!·I

2. Enter”‘
   + 1 + #

3. Enter Owner code + #
   I·, ::Hi5 • ·it + a

4. Enter new Owner code(4•9 digitals}+#
   new Owner code(4-9 d191tals) ·1/1

5. Then locker will make 3 sounds beep and light Nash, Owner code has been changed successfully.
   Cl· B

Set/Change Master code by Owner code

1. Touch the keypad and enter two random code.
   • I, lei, ill::.2· ·I

2. Enter
   • + 2 + #

3. Enter Owner code + #
   l· I’ lie+ t l • II

4. Enter new Maslar code(4-9 dlg1tals) + #
   new Master code(4-9 digitals) •1/1

5. T hen locker successfully.
   Cl· B

D. Set/Change Service code

1. Touch the keypad and enter two random code.
   • I,+IH, H ·I::.2·1·1

2. Enter
   • + 99 + II

3. Enter Owner code + it
   l• d:l=ii5+tl · II

4. Enter new Service code(4-9 digitals)+#
   new Service code(4-9 digitals) •1/1

5. Then locker will make 3 sounds beep and light Oat, Service code se U changed successfully.
   Cl ·f J

E. Set/Change user code by Owner code

1. Touch the keypad and enter two random code.
   + l, ”l· l r l, I+ l::l+Hi

2. Enter
   • + 3 + #

3. Enter Owner code + II
   1•1• 1+1s+t1 + a

4. Enter ID number(01-10) +#,Enter new Service code(4-9 digitals)+ II
   l l· W@ Wi +II• ·II

5. Emler new permanent code(4-9 digitals) + #
   new user code(4-9 dlg1tals) •1/1

6. Then locker wall make 3 sounds beep and light flash, user code set/changed successfully.
   Cl·BI

Change Master code by Master code

1. Touch the keypad and enter two random code.
   • IM ·IH ,l· l· i::H+i

2. Enter
   •+ 6 + #

3. Enter Master code + II
   IM® M l· II

4. Emler new Master code(4-9 digitals)+#
   new Maslar code(4-9 digitals) ·1/1

5. Then locker will make 3 sounds beep and light Nash. Master code set/changed successfully.
   Cl ·II

G. Set/Change user code by Master code

1. Touch the keypad and enter two random code.
   t, + h d ·IH, H· l::ii+I
   2. Enter
   • + 7 + #
   3. Enter Master code + #
   l{@Ml·II
   4, Enter ID number{Ol-10) +#,Enter new user code(4-9 digitals) + #
   1•@m@®’WI •a• • a
   5. Then locker will make 3 sounds beep and light Nash, user code set/changed successfully.
   Cl ·B

Delete code

Delete user code by Owner code

1. Touch lye keypad and enter two random code.
   · i,1 :·l t I, l+ l::l·+N

2. Enter•
   + 5 + #

3. Enter Owner code + #
   l· J• !:H ii +M • II

4. Enter correspond 10 number(01-10) +#,which you want to delete.
   correspond 10 number(01-10) . a

5. Then locker will make 3 sounds beep and light flash. user code deleted successfully.
   Cl·■
   B.

Delete Master code

1. Touch the keypad end enter two random code.
   li + IM·IH,H MH +i

2. Enter”‘
   + 4 + #

3. J, Enter Owner code+#
   i· MI Hi i+ t i + II

Then locker will make 3 sounds beep and light flash , Master code deleted successfully.
al+ B

Delete Service code

1. Touch the keypad and enter two random code.
   + IM ·IS ‘,l+ l::H+i

2. Enter*
   + 00 + #

3. Enter Owner code + #
   l· M:Hi··i·tl + II

4. Then locker will make 3 sounds beep and light flash . Master
   code deleted successfully. al +II

Delete user code by Master code

1. Touch the keypad and enter two random code.
   r, + ld.· lei, I+ l::i!+ti

2. Enter *
   + 5 + #

3. Enter Master code + #
   11,@i &if l! l t l + II

4. Enter correspond ID number(01-10) +#,which you want to delete.
   correspond ID number(01-10) +a

5. Then locker will make 3 sounds beep and light flash, user code is deleted successfully.
   CIJ+B

Switch Mode

A. Set Public mode

1. Touch the keypad and enter two random code.
   it + ld.· elf i:l+J,,f··l·I
   2. Enter
   + 88 + #
   3. Enter Owner code + #
   M· M, Him + a
   4 . Then locker will make 3 sounds beep and light flash , Public mode set successfully.
   al +II
   8 . Set Private mode
   1. Touch the keypad and enter two random code.
   + I, l· lei ,ill::IH·I
   2. Enter + 77 + #
   3. Enter Owner code -+ #
   M· h:Hi·+tl + II
   4. Then you will hear three tone beeps and light is flash , Private
   mode is set successfully.

Set silence .!!Japed

1. Touch the keypad and enter two random code.
   t, · ld.· life ,l + l::H+fi

2. Enter*
   + 11 + #

3. Enter Master code +
   # expr, .. ,., • 11

4. Then locker will make 3 sounds beep and light flash , non-silence mode set successfully.
   al +II

Lock/Unlock

Unlock with Owner code or Master code

1. Under the lock status, Touch the keypad and enter two random
   code.

2. Enter Owner/Master code + #
   M·M4@Hii+M + II

3. Locker will unlock while make 1 beep sound.
   al+~ @

Lock with Owner code or Master code

1. Under the unlock status, Touch the keypad and enter two random
   code.

2. Enter Owner/Master code + #
   M•M.t;¥Mi?+M + a

3. Locker wil1 Lock while make , beep sound.

Lock with Teem~ array code (under public mode)

1. Under the unlock status in public mode, Touch the keypad and
   enter two random code.

2. Enter Temporary code + #
   819::IM .. [·t l + a

3. Locker will Lock while make 1 beep sound. al·(:]

Unlock with Temporary code (under public mode)

1. Under the lock status in public mode, Touch the keypad and
   enter two random code .
   (:]+ t i

2. Enter Temporary code +
   # l d ::\Wii +M + II

3. Locker will unlock while make 1 beep sound.
   a+~

Lock with User code (under private mode)

1. Under the unlock status in public mode, Touch the keypad and
   enter two random code.

2. Enter User code + #
   + II

3. Locker will Lock while make 1 beep sound.
   Cl ·r:1

Unlock with User code (under private mode)

1. Under the lock status in public mode, Touch the keypad and enter two random code.

2. Enter User code + #
   M+ Hl··l• M + II

3. Locker will unlock while make 1 beep sound.
   Cl·

Lock with Service code (under public mode)

1. Under the unlock status in public mode, Touch the keypad and enter two random code.

2. Enter Service code + #
   E1irii!i2·1·1 + II

3. Locker will Lock while make 1 beep sound.
   Cl· EI

Unlock with Service code (under public mode)

1. Under the lock status in public mode. Touch the keypad and enter two random code.

2. Enter Service code + #
   iii,1¥.£+1 + II

3. Locker will unlock while make 1 beep sound.
   Cl·

NOTE
External Power Back-up
In case the batteries run out completely, please insert the 9V power backup- battery-case to the emergency socket or connect 9V battery to the electric- pole, then unlock the lock.
(Power back-up connector needs to buy separately)

Alarm Function
Low Battery Alarm: When the battery village drop to DC 4.2V±0.2V, locker will make 8 beep sounds and light flash while opening, the batteries need lo replace. Incorrect Key Alan: Touch any incorrect key, 3 Beeps are sounded; touch any incorrect key 3 times, white light will on, and the alarm last for 60 seconds. Anti-pick Alarm: In lock state, if latch be pressed, light will on, and alarm last for 60 seconds.

How to use sync kit
Place the 18 key (Ds1996) on the reader Then connect sync kit to external socket (Sync kit needs to buy separately)

Synchronizing information(Locker to 18 key}

1. Put bib key and bib reader. Touch the keypad and enter two random code.
   it · h@·or i: H· l::if+i

2. Enter•
   + 66 + #

3. Enter Owner code + #
   l ·M: HI+ I • II

4. Then locker will make 3 sounds beep and light Hash successfully, made the information of locker lo 18 key.
   Cl·■·loll

Synchronizing inform nation(IB key to Locker)

1. Put bib key and 18 reader, Touch the keypad and enter two random code.
   it· ld. ·ph., ilia::HI

2. Enter•
   + 55 + #

3. Enter Owner code + #
   Hi: HI +I· II

4. Then locker will make 3 sounds beep and light Hash successfully, made the information of locker to 18 key.
   Cl·■· loll

Programming Gulden

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>