CallToU CC28 Caregiver Pager Wireless Call Button User Manual
- June 14, 2024
- CALLTOU
Table of Contents
CallToU CC28 Caregiver Pager Wireless Call Button
A Good Life in Old Age
Monitoring and Improving Quality in Long-term Care
As a growing number of frail old people in need of home care, delivering
quality long-term care services, which are effective and responsive in time,
has become a priority for every family.
“Call to You” is determined to provide perfect solutions that enable your
loved ones to retain their independence and dignity in daily life, so they can
live on their own and release your burden with peace of mind.
We “CallT oU” fucus on professional home caregiver pagers for more than a
decade, and have helped and cared for millions of ELDERLY and those in need to
help timely.
“Call to you” gives more care for the elderly You Need, We Here!
For FAQs and more information, please visit:
www.calltou.com
[email protected]
Anywhere in The Home Connected Care
Deliver users’ help signal to their family or caregivers
Product diagram
Feature
-
ON/OFF
① Power on: Hold for 5 second, receiver will beep with number ”00” on the display
② Power on: Hold for 5 second, receiver will beep with number ”–” on the display. -
Adjust the volume
Press once to adjust the volume (default from level 1). There are 5 levels from 0-120dB.
Note: When power off, all setting will remain the same for the Memory Function. -
Ringtone switch
Push to switch from 2 ringtones, “Ding-dong” and Alarm sound When triggered, will ring for 90 second before it stops, or you can press any key on the receiver to stop ringing. -
Vibration
When triggered, the receiver will vibrate 10 times, and stop for 3 seconds, then vibrate again then stop, lasting 90 seconds 90 second before it stops, or you can press any key on the receiver to stop it. -
Low battery warning
When voltage is low, the receiver will flash red or blue. Red means the receiver needs battery changing, and the Blue light means the transmitter need battery changing.
Operating Instructions
How To Use?（Paired Before Delivery）
1. Firstly, put the batteries in the receiver.
2. Hold for 5 seconds to turn on the receiver, and you will have 00 on the
display screen.
How To Pair?（Paired Before Delivery）
Step 1 Hold Setting button for 5 seconds, and there will be a “Ding”,
meaning it’s under pairing mode.
Step 2 Choose a number for the transmitter by pressing /
(forward/backward) The number you choose will display on the screen.
Step 3 Press the transmitter once to pair with receiver. If the pairing is successful, there will be a“DingDing” from receiver, the number appears on the display screen.
Pair to more transmitter/ receivers
If you want to pair more transmitter/ receivers, just repeat step 1-3 one by
one.
One receiver can work with 20 transmitters. One transmitter can pair to one
number on the receiver.
Clearing All Settings
Hold Volume button for 5 seconds to reset receiver to default mode. The
receiver will ding with number “01” on the screen, meaning clearing is done.
If you want to pair the them again, just repeat step 1-3 one by one.
Battery Replacement
- Push the Backclip down.
- You need a screw driver to remove the cover.
- Replace 3AAA batteries in the slot, pain attention to the right terminal ends. Then put the cover back and secure with the screws.
1. You need a screw driver to remove the cover from the back.
2. Replace 12v23A batteries in the slot, pain attention to the right terminal
ends. Then put the cover back and secure with the screws.
Install
- Fix the transmitter of the button to certain place. Tape up the back clip with 3M tape, or fix it with screws.
- Then place the transmitter on the back clip.
Transmitter lanyard mounting
Specifications
| Receiver| Transmitter
---|---|---
Power| 4.5V| 12V23A Battery
Frequency| 433Mhz| 433Mhz
Working Range| 500ft/150m| 500ft/150m
Waterproof Level| N/A| IP55
Operating Temperature| -30℃-70℃/-22℉-158℉
Q&A
Q: Why does the receiver doesn’t work?
-
Press volume button to check if receiver works probably. it’s might be under the mute mode. If it worked, meaning the receiver is ok. If not, refer to the customer service problem with receiver.
-
Press transmitter to check if light indicator works probably.
If it worked, meaning the transmitter is ok. If not, try to replay batteries and check again. If still not working, refer to the customer service problem with transmitter. -
If receiver and transmitter are ok, try pairing again by repeating Step 1-3.