CC01 Series Calltou Wireless Caregiver Pager User Manual

: June 13, 2024
: CALLTOU

Product Information

The CALLTOU Caregiver Pager System is designed to provide a solution for monitoring and improving quality in long-term care for frail old people who require home care. The system consists of a receiver and a call button, allowing users to send help signals to
their family or caregivers. The receiver has a flash alarm volume button, forward and backward buttons, a speaker, and an AC plug. It has a 500 feet operating range in open areas and is equipped with a detachable lanyard, a red light indicator, a silicone cover, and a detachable bracket for wall mounting. The receiver has a waterproof grade of IP55, providing durability and reliability.

The system is extendable with additional receivers and call buttons, and it is compatible with other models of CallToU receivers and buttons. The package includes the receiver, call button (available in white or black), lanyard (available in white or black), a battery, a user manual, double-sided adhesive tape, and a screwdriver. For more information, please refer to our customer service.

Product Usage Instructions

Using Your Pager System – Pairing

Press the forward/backward button on the receiver to select your favorite melody.
Press and hold the volume button on the receiver until the LED light flashes with a ding to enter the pairing mode.

Using Your Pager System – Attach Lanyard

Slide the back cover of the call button according to the direction of the arrow.
Pin the lanyard onto the call button.
Press the call button quickly, and there will be a Ding-Ding sound, and the receiver light indicator will flash.
Press the call button again to confirm if the ringtone is the one you set. If it is, the pairing is done.

Using Your Pager System – Replacing Battery

Slide the back cover of the call button according to the direction of the arrow.
Open the button base by turning the screw with a screwdriver.
Replace the 23A 12V battery.
Close the button base, retighten the screws, and close the back cover.

Clearing Setting & Installation

To clear the settings:

Press and hold the Forward button on the receiver for 5 seconds.
Wait for a Ding sound and observe the receiver indicator flashing. This indicates that all previous settings have been cleared.

The transmitters will return to default settings, and any added/paired transmitters will be cleared.

Note: Battery life depends on how often you use it.

CALLTOU A Good Life in Old Age

Monitoring and Improving Quality in Long-term Care
As a growing number of frail old people in need of home care, delivering quality long-term care services, which are effective and responsive in time, has become a priority for every family.
“Call to You” is determined to provide perfect solutions that enable your loved ones to retain their independence and dignity in daily life, so they can live on their own and release your burden with peace of mind.
We “CallToU” focuses on professional home caregiver pagers for more than a decade, and have helped and cared for millions of ELDERLY and those in need to help timely.
“Call to you” gives more care for the elderly
You Need, We Here!

Anywhere in the Home

Connected Care

Deliver users’ help signal to their family or caregivers

What’s Included

NOTE

The CC01 series receivers and buttons are universal;
This system is extendable with more receivers and call buttons;
Other models of CallToU receivers and buttons can also be working together;
For more information please refer to our customer service.

At a Glance – Receiver

Flash Alarm
Volume Button(0-110db)
Forward Button
Backward Button
Speaker
AC Plug
500 feet operating range in open areas

At a Glance – Transmitter

Detachable Lanyard
Red Light indicator after pressing
Silicone cover
Detachable Bracket(wall-mounted)
Waterproof Grade: IP55

STEP 1
Press the “forward”/”backward” button on the receiver to select your favorite melody
STEP 2
Press and hold the volume button on the receiver until the LED light flashes with a “ding” to enter the pairing mode
STEP 3
Press the call button quickly, and there will be a “Ding-Ding”, and the receiver light indicator will flash
STEP 4
Press the call button again to confirm if the ringtone is the one you set. If it is, the pairing is done.

Video Guide

Transmitter receiver pairing
Suitable for adding/pairing additional Transmitters

STEP 1
Slide the back cover according to the direction of the arrow
STEP 2
Pin the lanyard
STEP 3
Slip the tip of the rope over the entire lanyard
STEP 4
Slide the back cover back (to where it was)

Video Guide

Attach Lanyard
Portable Necklace Lanyard

STEP 1
Slide the back cover according to the direction of the arrow
STEP 2
Open the button base by turning the screw with a screwdriver
STEP 3
Replace the 23A 12V battery
STEP 4
Close the button base, retighten the screws, and close the back cover

How to Clearing Setting

Press and hold the“Forward” button on the receiver for 5 seconds
Until there is a “Ding”, the receiver indicator will flash, then all the previous settings will be cleared
The transmitters will return to default settings (The set ringtone will default and added/paired transmitters will be cleared)

Installation Guide

Plug the receiver into a mains socket and switch the socket on.
Test the distance to ensure the range of use (the service distance is 500ft, the distance may vary due to the obstacles of the environment)
Fix the transmitter in place with (supplied) double-sided adhesive tape.(Clean the wall before sticking)

Specifications

For FAQs and more information, please visit:

www.calltou.com
[email protected]

Address:
room 605, building 2, hengdali factory, chidian Jinjiang, fujian,CN

Trouble-Shooting

The Receiver can not work with the transmitter?

If the Receiver can not work with the transmitter?
When the transmitter battery power is running out, the light will be weak, and cannot send out signals. Please replace the new battery.
When The pairing was accidentally cleared, please pair the transmitter and the button again. Please refer to” Using Your Pager
System-Pairing”.
When The distance between the transmitter and the receiver is beyond the working range, signals will not be received. Please keep a distance of 50-200 meters.
When there are obstacles near the transmitter and receiver, the signal transmission will be interfered with. Please stay away from obstacles like power supply TV microwave ovens,iron door, etc.

Precautions

Please test the working distance between the receiver and the transmitter before installation!
Please do not install the transmitter on the doors of metal. Metal will interfere with signals and affect the working range!
Please do not install the receiver near the TV, induction cookers, microwave ovens, and other electrical appliances with electromagnetic waves!
Please do not put the receiver and transmitter in water or fire to cause accidents!
In case of an idle product for a long time, please take out the battery to prevent the battery from dew and avoid malfunction!

A letter from CallToU

Many thanks for thinking of us and choosing us!
For everyone in CALLTOU family, it’s our honor to have us as our customers. It’s always a pleasure serving you and certainly looking forward to more in the future.
A Big Thank you for helping us to grow
Our customer service, especially in the after-sales phase, guarantees the satisfaction of our clients. In line with this strategy, we hope you share with us your feedback at any time, be it positive or negative. There is always room for improvement, so if we can serve you better in any way, please do inform us.
We provide 1-year limited product warranty to the original purchaser against manufacturing defects in materials and workmanship, not covering any normal wear and tear, improper handling, or accidental damage.
CallToU Customer Care Support Team

ELDERLY CAREGIVER PAGER
CCO1 HOME CAREGIVING — — MAKING HOME CARE EASY FOR EVERYONE