Fortdows B0CM3G1PGL 1280×800 5G WiFi Android 11 Car Stereo Instruction Manual

Fortdows B0CM3G1PGL 1280×800 5G WiFi Android 11 Car Stereo

Toyota Camry 2007-2011 Central Control Disassembly and Operation

Post-installation rendering

Tools required for disassembly

1. crowbar

2. Screwdriver

3. STEP 1

4. You need to shift the gear lever to D gear , will start by unscrewing the shift knob it just unscrews counter­clockwise, and you have to remove the two side panels there are no

5. Remove the center piece and unplug all wires.

6. Remove the 2 screws securing the pocket remove the pocket.

7. Use a crowbar to remove the air outlet of the air conditioner.

8. Remove the 4 screws securing the radio.

9. Now you need to do is put your hand above it and one under and pull the whole radio casing it may be jammed a bit and you need to wiggle the whole thing, it will come out.

10. Kind tips We provide 7*24 hours of after-sales technical support to solve your installation and operation prob­lem.If you have any questions about the installation or the product itself, please contact us by message, we will reply your solution within 24 hours.

11. After-sales Email address: Fortdows.cam@gmail.com

12. Plug in the host’s power cord and other links.

13. Start using.

Features

• Applicable models: Toyota Camry  generation [year:2007-2011
• Screen size: 9″
• Processor: 4 cores
• Memory: 2GB [RAM]+32GB [ROM]
• Screen resolution: 1280*800
• Intelligent voice:built-in standard
• Control method: Touch screen
• Bluetooth version: 4.0
• Link method: WiFi, Bluetooth, USB Carplay Brief description of functions:
• Music: Built-in DSP
• Navigation: Built-in GPS navigator
• Phone: Support Bluetooth phone hands-free Radio frequency band: FM/AM
• Built-in Protocol Box: Steering Wheel Controls HD rear view camera: unobstructed reversing Connection method: wireless 105 Carley and wired Android Auto connection/Phone Mirror ­Link

Carley Connect method

Method 1: How to use the carplay?

1. At the same time, turn on the Bluetooth of the phone, and connect the phone with the host. [Bluetooth password: 0000]

2. Turn on the main page and open “Zlink5” app.

3. After opening “Zlink5”, Check the iphone,
   “Use CarPlay car?” will pop up, click to select “Use CarPlay”.

4. The initial connection may take 1 to 5 minutes due to the large number of mobile phone file in­formation.

Method 2: How to use Andriod auto or Car­play[wired]?

1. Be sure your android’s phone has be installed the ‘android auto’ app.
2. Connect the phone with the radio via original usb cable.
3. Turn on the main page and open “Zlink5” app.

Note:
If you want to Reset this Radio, please enter the Factory password: 1617 or 3368.

FCC warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two condi­tions

1. This device may not cause harmful interference and
2. This device must accept any interfer­ence received including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>