FIRST LOVE E17 Cordless Vacuum Cleaner User Manual

FIRST LOVE E17 Cordless Vacuum Cleaner

Product Usage Instructions

Cautions: Please read the following cautions before using the appliance:

• Read the user manual carefully before using the appliance.
• Ensure that all parts are properly connected before operating.
• Do not use the appliance near water or other liquids.
• Avoid using the appliance on hot surfaces or near open flames.
• Do not use the appliance for any purpose other than its intended use.
• Keep the appliance away from children and pets.
• If any issues or questions arise during usage, contact our after-sales service.

Parts Name

attachment.
Brush Release Button| Button to release and attach the brush combo or crevice
brush.
Electric Brush| Attachment for cleaning carpets and other surfaces.
Motor and Dust Cup Release Button| Button to release and detach the motor and dust cup
assembly.
Trigger Button| Button to activate the vacuum suction.
Max Speed Switch| Switch to adjust the suction power between low and high
speed.
Battery Pack| Rechargeable battery pack for powering the vacuum cleaner.
Battery Pack Release Button| Button to release and detach the battery pack.
Battery Quantity Indicator Light| Indicates the remaining battery level.
Charging Port| Port for connecting the charger to recharge the battery
pack.
Brush Combo| Attachment with a combination of brush and crevice tool.
Crevice Brush| Attachment for cleaning narrow spaces and corners.
Charger| Device for charging the battery pack.
Wall Mount| Mounting accessory for storing the handheld component on the
wall.

Parts Connection

Battery Pack Assembly

• Insert the battery pack into the bottom of the body until you hear a click locking sound. Pay attention to the correct direction.

Motor and Dust Cup Assembly

• Clamp the hook at the bottom of the motor dust cup assembly into the corresponding part of the host housing, and rotate it in the specified direction until you hear a click locking sound.

Connection of Ground Brush to Metal Pipe

• Insert the brush connector into the metal connector until you hear a click locking sound.

Connection of Metal Tube to Handheld Component

• Insert the metal connector into the interface of the handheld component and hear the click locking sound.

Connection of Ground Brush to Handheld Component

• Insert the brush connector into the interface of the handheld component until you hear a click locking sound.

Attachment Connection to Handheld Components

• Insert the attachment into the interface of the handheld component until you hear a click locking sound.

Use of Wall Mount

1. Take out the hanger and secure it to the wall.
2. Fix the hook at the bottom of the handheld component to the corresponding position of the hanger.

Please read the instructions carefully before using the appliance.

Preface

Thank you for choosing this appliance, hope you will enjoy it.
This user manual involves how to use the appliance safely and correctly，please read it carefully before using to get an ideal operating result. This user manual is updating till printing，brand FIRST LOVE .reserves the right of revising and explaining.We will continue to improve the appliance and the right of revising this manual without any notice.

If there is any question and suggestion during using please be feel free to contact with our after-sell service.

• 1-888-234-6666
• support@firstlovehome.com
• https://www.firstlovehome.com/

Precautions

Cautions

Before use, carefully read all the contents in this manual book.

1. This is a dry type rechargeable handheld vacuum cleaner. It can not be used to vacuum water, detergent, and other liquids, and wet surface articles. Liquids will damage the cleaner, such as short current or motor burning down.
2. Big particles will result in motor burning down or tube congestion.
3. Do not use or store the vacuum cleaner in unfavorable conditions such as high temperature or low temperature. It is recommended to use the vacuum cleaner indoors with an ambient temperature of 0-40 ° C. Store it in a cool and dry place and do not allow long-term sunshine.
4. When using a new battery or the battery for the first time after long-term storage, please fully charge the battery. Please ensure to charge and discharge at least once every three months when the machine is not used for a long time.
5. When your vacuum cleaner is fully charged and needs cleaning or maintenance, unplug the chargerwithout pulling the power cable.
6. When the battery capacity decreases and the service time of the machine becomes shorter, a new battery pack can be purchased for replacement.
7. Waste battery pack should be safely recycled, do not throw away.
8. The lithium battery in the battery base can only be used on the unit, not for other purposes. Only the built-in charging adapter can be used to charge. Do not remove the battery pack or contact it with liquid to avoid damage or short circuit. Do not place the battery pack near high temperature objects or open flames. Do not insert the battery pack with sharp objects or damage the battery pack.
9. When the vacuum cleaner fails to work or related accessories are damaged in the process of use, in order to avoid danger, users should not disassemble or assemble by themselves. They must go to the designated maintenance point for professional maintenance or contact our after-sales service personnel for inspection and maintenance.
10. Do not allow children to use, play with the unit and charge the battery pack to avoid accidents.

Parts name

1. dust cup
2. dust cup release button
3. tube release button
4. conductive tube
5. brush release button
6. electric brush
7. motor and dust cup release button
8. trigger button
9. max speed switch
10. battery pack
11. battery pack release button
12. battery quantity indicator light
13. charging port
14. brush combo
15. crevice brush
16. charger
17. wall mount

What’s in box

Parts connection

1. Battery pack assembly
   • Insert the battery pack into the bottom of the body until you hear a “click” locking sound. Pay attention to direction (as shown).
2. Motor and dust cup assembly
   • Clamp the hook at the bottom of the motor dust cup assembly into the corresponding part of the host housing, and rotate it in the direction shownby the arrow until the locking sound of “click” is heard. (As shown in the figure)
3. Connection of ground brush to metal pipe
   • Insert the brush connector into the metal connector until you hear a “click” locking sound. (As shown in the figure)
4. Connection of metal tube to hand held component
   • Insert the metal connector into the interface of the handheld component and hear the “click” locking sound. (As shown in the figure)
5. Connection of ground brush to handheld component
   • Insert the brush connector into the interface of the handheld component until you hear a click locking sound. (As shown in the figure)
6. Attachment connection to handheld components
   • Insert the attachment into the interface of the handheld component until you hear a “click” locking sound. (As shown in the figure)
7. Use of wall mount
8. Take out the hanger and secure it to the wall.
9. The hook at the bottom of the handheld component is fixed at the corresponding position of the hanger. (As shown in the figure)

How to use

Power on (low speed), high speed, power off

• Install the machine, pull the trigger and the switch in turn, can realize the recycle switch of power on(low speed), high speed, power off .

Use of accessories (use of 2-in-1 combined brush)

1. Insert the 2-in-1 combined brush into the suction port of the main machine, and then push the brush head forward to lock it, then you can clean furniture, home appliances, bookshelves, cabinets, combing tables, computer keyboards and other places.
2. Insert the 2-in-1 flat suction into the suction port of the host machine, and then push the brush head back to the end to clean the bed, curtain, sofa surface and other places.

Use of accessories (use of crevice brush)

• Insert the crevice brush into the suction mouth of the host machine to clean the cracks of the sofa and the skirting line of the wall.

The use of electric floor brush

• First insert the electric brush into one end of the conductive tube, and then insert the other end of the conductive tube into the host interface to clean the floor, carpet, tile and other places.

Charging

1. This machine can only be charged with its own charger, please confirm the charger before charging.
2. Insert the plug of the charger into the power socket, and plug the output end into the charging socket of the battery pack to charge. When charging normally, the indicator light shows “blinking blue”, and when fully charged, the indicator light shows “blue light”.
3. When the battery is low, charge it in time and unplug the charger in time after the battery is fully charged.
4. You can charge the battery pack directly or the installed host.

Cleaning and parts replacement

Clean after daily use

1. Press the release button of the lock on the top of the motor dust cup assembly to separate the motor dust cup assembly from the body assembly, and then press the release button on the bottom cover of the dust cup to open the bottom cover, and dust can be poured (suggestion: Dust can be poured after each use).

Clean the dust cup

1. Press the release button of dust cup bottom cover to open the dust cup bottom cover, you can dump the garbage in the dust cup. After dumping the garbage, close the bottom cover of the dust cup until it is locked (as shown in the picture)
2. Hold the dust cup with one hand and the motor assembly with the other hand and rotate counterclockwise until the dust cup assembly can be removed. (As shown in the figure)
3. Remove the filter in the direction of the arrow and clean or replace the filter. (As shown in the figure)
4. Pull the metal handle by hand and remove the filter for cleaning or cleaning. (As shown in the figure)
5. After cleaning the filter, please put it in a ventilated place to dry and then use it fully(soak the filter with soapy water first and then rinse it with clean water. Do not rub it repeatedly to avoid damaging the internal structure of the filter). (As shown in the figure)

Clean the electric floor brush

1. Push down the left slide button of the ground brush and lift the roller brush handle to remove the roller brush. (As shown in the figure)
2. Remove and clean the roller brush, and then assemble it in the opposite order to disassemble it. Reset the handle of the roller brush.

Note: After a long time of use, the rollers of the brush may be entangled with long floccule such as hair, which needs to be cleaned in time so that the vacuum cleaner can work more effectively.

Q & A

Please check the following points before consulting the maintenance department.

Suction reduction

| Dust cup is full Dust cup filter plate

accumulated dust electric

brush air duct blocked

Roll brush block

| Pour the dust out of the dust cup

Clean or replace the dust cup filter

Clean up the garbage inside the electric brush

The charging indicator light is dead when charging| The charging connector is not fully inserted into the charging port of the battery pack| Insert the charging connector completely into the charging port of the battery pack

Insufficient use time after charging

| Insufficient charging time Battery aging| Charge according to standard time

Purchase new batteries at designated repair points

Roller stuck| Inhalation of excessive volume of foreign body Intertwining excessive hair and fibers| Clean the roller brush and restart the machine

Technical parameters

Circuit diagram

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>