DRAGRO B0BCKDS21M Electric Cordless Weed Wacker User Guide
- June 14, 2024
- DRAGRO
Table of Contents
DRAGRO B0BCKDS21M Electric Cordless Weed Wacker
INSTALLATION INSTRUCTION
- Open the telescopic rod
- Align and insert
- Rotary tightening
- Align the grass baffle with the card slot
- Put the cover on
- Completion Steps
- The saw blade must be aligned with the 4 raised slots in the head, and the saw teeth must be installed in the direction shown in the figure, otherwise, it will not work
- After putting in the saw blade correctly, put in the spacer first and then tighten the nut.
- Check the saw blade gear direction again, it must be as shown
- Install the iron bar of the grass stopper
- Install the handrail 1
- Install the handrail 2
- Installation completed
- If the working environment is dominated by weeds, it is recommended to use this blade to avoid clogging and improve work efficiency
- If the weeds a re too dense, you can remove the wheels and put on the baffle to work
- circular saw blades are great for cutting thicker shrubs, branches, and saplings To avoid damage to the blade, please choose the correct blade when weeding.
- To start the machine you need to press two buttons at the same time Start the machine and start working
- Press the black button to extend the pole
- 90° adjustment by pressing the black button
Note:
- Please read this instruction manual carefully before use
- If you find a problem that is not described in the manual, please do not disassemble the device in a hurry.
- After-sales Contact:dragro@thelookol.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>