KRAMER VP-2xl Computer Graphics Video and Stereo Audio User Manual

June 14, 2024
Kramer

KRAMER VP-2xl Computer Graphics Video and Stereo Audio

Product Information

Specifications

  • Model: VP-2xl, 1:2 VGA Distributor VP-6xlN, 1:6 UXGA Distributor
  • Brand: Kramer Electronics, Ltd.
  • High bandwidth of 340MHz
  • HDTV compatible

Introduction

Welcome to Kramer Electronics (since 1981): a world of unique, creative and affordable solutions to the infinite range of problems that confront the video, audio and presentation professional on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 500-plus different models now appear in 8 Groups, which are clearly defined by function.
Congratulations on purchasing your Kramer VP-2xl 1:2 VGA Distributor and/or Kramer VP-6xlN 1:6 UXGA Distributor.

This VP-2xl is ideal for:

  • Dual monitor desktop multimedia or teleconference systems
  • Presentation systems requiring a local monitor and projector operating simultaneously
  • Schools, churches, A/V technicians, rental/staging

The VP-6xlN is ideal for:

  • Any professional system requiring high-quality computer graphics (up to at least UXGA) distribution to multiple monitors/projectors
  • Expanding and creating larger systems

Getting Started

  • Unpack the equipment carefully and save the original box and packaging materials for possible future shipment
  • Review the contents of this user manual
  • Use Kramer high-performance high resolution cables

Overview

About the VP-2xl
The VP-2xl 1:2 VGA Distributor is a high performance, desktop size, distribution amplifier for computer graphics signals, with resolutions ranging up to at least UXGA, and unbalanced stereo audio signals. It takes one computer graphics input, and an unbalanced stereo audio input, and outputs two computer graphics and two unbalanced stereo audio signals. The VP-2xl:

  • Has a high bandwidth of 340MHz
  • Includes an AUDIO LEVEL control knob to adjust the audio signal level
  • Includes a VGA LEVEL control knob to adjust signal level, compensating for cable loss over long distances
  • Is HDTV compatible

About the VP-6xlN
The VP-6xlN 1:6 UXGA Distributor is a high-performance computer graphics video amplifier for computer graphics video signals with resolutions ranging up to at least UXGA, and is HDTV compatible. It takes one input, provides correct buffering and isolation, and distributes the signal to six identical outputs. The VP-6xlN features:

  • High bandwidth of 340MHz
  • HDTV compatible

Connecting the Distributors

Connecting the VP-2xl
To connect the VP-2xl 1:2 VGA Distributor, follow these steps:

  1. Connect the computer graphics input source to the input port of the VP-2xl using a high-resolution VGA cable.
  2. Connect the unbalanced stereo audio input source to the audio input port of the VP-2xl using an appropriate audio cable.
  3. Connect the output ports of the VP-2xl to the desired display devices (monitors or projectors) using high-resolution VGA cables.
  4. Adjust the AUDIO LEVEL control knob and VGA LEVEL control knob  as necessary to optimize audio and video signal levels.

Connecting the VP-6xlN

To connect the VP-6xlN 1:6 UXGA Distributor, follow these steps:

  1. Connect the computer graphics input source to the input port of  the VP-6xlN using a high resolution VGA cable.
  2. Connect the output ports of the VP-6xlN to the desired display devices (monitors or projectors) using high resolution VGA cables.

Technical Specifications

VP-2xl 1:2 VGA Distributor

Specification Value
Bandwidth 340MHz
HDTV Compatibility Yes

VP-6xlN 1:6 UXGA Distributor

Specification Value
Bandwidth 340MHz
HDTV Compatibility Yes

FAQ

  • Q: What is the bandwidth of the VP-2xl and VP-6xlN distributors?
    The bandwidth of both distributors is 340MHz.

  • Q: Can the VP-2xl and VP-6xlN distributors handle HDTV  signals?
    Yes, both distributors are HDTV compatible.

  • Q: What kind of input and output cables should I use?
    We recommend using high performance high resolution cables for optimal performance.

Models:

  • VP-2xl, 1:2 VGA Distributor
  • VP-6xlN, 1:6 UXGA Distributor

Introduction

Welcome to Kramer Electronics (since 1981): a world of unique, creative and affordable solutions to the infinite range of problems that confront the video, audio and presentation professional on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 500-plus different models now appear in 8 Groups1, which are clearly defined by function.
Congratulations on purchasing your Kramer VP-2xl 1:2 VGA Distributor and/or Kramer VP-6xlN 1:6 UXGA Distributor.

This VP-2xl is ideal for:

  • Dual monitor desktop multimedia or teleconference systems
  • Presentation systems requiring a local monitor and projector operating simultaneously
  • Schools, churches, A/V technicians, rental/staging

The VP-6xlN is ideal for:

  • Any professional system requiring high quality computer graphics (up to at least UXGA) distribution to multiple monitors/projectors
  • Expanding and creating larger systems.

The package includes the following items:

  • VP-2xl 1:2 VGA Distributor2 or VP-6xlN 1:6 UXGA Distributor
  • This user manual

Getting Started

We recommend that you:

  • Unpack the equipment carefully and save the original box and packaging materials for possible future shipment
  • Review the contents of this user manual
  • Use Kramer high performance high resolution cables5
  1. GROUP 1: Distribution Amplifiers; GROUP 2: Video and Audio Switchers, Matrix Switchers and Controllers; GROUP 3: Video, Audio, VGA/XGA Processors; GROUP 4: Interfaces and Sync Processors; GROUP 5: Twisted Pair Interfaces; GROUP 6: Accessories and Rack Adapters; GROUP 7: Scan Converters and Scalers; and GROUP 8: Cables and Connectors
  2. With a power adapter
  3. With a power cord
  4. Download up-to-date Kramer user manuals from the Internet at this URL: http://www.kramerelectronics.com
  5. The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com

Overview

Section describe the VP-2xl and VP-6xlN, respectively.

About the VP-2xl

The VP-2xl 1:2 VGA Distributor is a high performance, desktop size, distribution amplifier for computer graphics signals, with resolutions ranging up to at least UXGA, and unbalanced stereo audio signals. It takes one computer graphics input, and an unbalanced stereo audio input, and outputs two computer graphics and two unbalanced stereo audio signals. The VP-2xl:

  • Has a high bandwidth of 340MHz
  • Includes an AUDIO LEVEL control knob to adjust the audio signal level
  • Includes a VGA LEVEL control knob to adjust signal level, compensating for cable loss over long distances
  • Is HDTV compatible

About the VP-6xlN

The VP-6xlN 1:6 UXGA Distributor is a high performance computer graphics video amplifier for computer graphics video signals with resolutions ranging up to at least UXGA, and is HDTV compatible. It takes one input, provides correct buffering and isolation, and distributes the signal to six identical outputs. The VP-6xlN features:

  • A video bandwidth of 500MHz that ensures transparent operation at all  graphics resolutions
  • ID Bit control underside switches
  • A front panel trimmer for UXGA equalization

To achieve the best performance:

  • Connect only good quality connection cables, thus avoiding interference, deterioration in signal quality due to poor matching, and elevated noise- levels (often associated with low quality cables)
  • Avoid interference from neighboring electrical appliances and position your Kramer unit away from moisture, excessive sunlight and dust

Your Distributors

This section includes a description of the:

  • VP-2xl 1:2 VGA Distributor
  • VP-6xlN 1:6 UXGA Distributor

The VP-2xl 1:2 VGA Distributor

# Feature Function
1 POWER Switch Illuminated switch for turning the unit ON or OFF
2 AUDIO LEVEL Knob Turn to control the output audio level
3 VGA LEVEL Knob Turn to control the VGA/XGA output level
4 AUDIO IN (R, L) RCA Connectors Connect to the right and left audio

source
5| VGA IN HD15F Connector| Connect to the VGA/XGA source
6| AUDIO OUT 1 (R, L) RCA Connectors| Connect to the right and left audio acceptor 1
AUDIO OUT 2 (R, L) RCA Connectors| Connect to the right and left audio acceptor 2
7| VGA OUT 1 HD15F Connector| Connect to the VGA/XGA acceptor 1
VGA OUT 2 HD15F Connector| Connect to the VGA/XGA acceptor 2
8| 12V DC| +12V DC connector for powering the unit

The VP-6xlN 1:6 UXGA Distributor

# Feature Function
1 POWER Switch Illuminated switch for turning the unit ON or OFF
2 UXGA EQ. Trimmer Adjusts1 the video EQ. (equalization) compensation
3 UXGA INPUT HD15F Connector Connect to the computer graphics (UXGA)

source
4| UXGA OUT HD15F Connectors| Connect to the computer graphics (UXGA) acceptors (from 1 to 6)
5| Power Connector with FUSE| AC connector enabling power supply to the unit


# Feature Function
1 ID BIT 4 Switch Slide to the left to set to ON2; to the right to set to

OFF
2| ID BIT 11 Switch| Slide to the left to set to ON2; to the right to set to OFF

Insert a screwdriver into the hole and carefully rotate it, to trim the level
The default. Enabling the notebook or laptop to output a VGA signal to an external VGA monitor

Installing on a Rack

This section describes what to do before installing the VP-6xlN on a rack and how to rack mount. To rack-mount the VP-2xl, see the Rack Adapters user manual for detailed instructions.

Before Installing on a Rack

Before installing on a rack, be sure that the environment is

within the recommended range:


Operating temperature range| +5 to +45 Deg. Centigrade
Operating humidity range| 5 to 65 % RHL, non-condensing
Storage temperature range| -20 to +70 Deg. Centigrade
Storage humidity range| 5 to 95% RHL, non-condensing

How to Rack Mount

To rack-mount the machine:

  • Attach both ear brackets to the machine. To do so, remove the screws from each side of the machine (3 on each side), and replace those screws through the ear brackets.
  • Place the ears of the machine against the rack rails, and insert the proper screws (not provided) through each of the four holes in the rack ears.

Note that:

  • In some models, the front panel may feature built-in rack ears
  • Detachable rack ears can be removed for desktop use
  • Always mount the machine in the rack before you attach any cables or connect the machine to the power
  • If you are using a Kramer rack adapter kit (for a machine that is not 19″), see the Rack Adapters user manual for installation instructions (you can download it at:
    http://www.kramerelectronics.com)

When installing on a 19″ rack, avoid hazards by taking care that:

  1. It is located within the recommended environmental conditions, as the operating ambient temperature of a closed or multi unit rack assembly may exceed the room ambient temperature.
  2. Once rack mounted, enough air will still flow around the machine.
  3. The machine is placed straight in the correct horizontal position.
  4. You do not overload the circuit(s). When connecting the machine to the supply circuit, overloading the circuits might have a detrimental effect on overcurrent protection and supply wiring. Refer to the appropriate nameplate ratings for information. For example, for fuse replacement, see the value printed on the product label.
  5. The machine is earthed (grounded) in a reliable way and is connected only to an electricity socket with grounding. Pay particular attention to supply connections other than direct connections to the branch circuit (for example, the use of power strips), and that you use only the power cord that is supplied with the machine.

Connecting the Distributors

The following sections describe how to connect the:

  • VP-2xl 1:2 VGA Distributor
  • VP-6xlN 1:6 UXGA Distributor

Connecting the VP-2xl
To connect the VP-2xl, as the example in Figure 4 illustrates:

  1. Connect a computer graphics source (for example, a computer) to the INPUT HD15F connector and to the R and L AUDIO IN RCA  connectors.
  2. Connect the OUTPUT HD15F connectors to up to1 two acceptors (for example, a display and a projector) and connect the R and L AUDIO OUT RCA connectors to audio acceptors (for example, two amplifiers with speakers).
  3. Connect the 12V DC power adapter to the power socket and connect the adapter to the mains electricity (not illustrated in Figure 4).
  4. If required, adjust the AUDIO LEVEL and the VGA LEVEL.

Connecting the VP-6xlN
To connect the VP-6xlN, as the example in Figure 5 illustrates:

  1. Connect a computer graphics source (for example, a computer) to the UXGA INPUT HD15F connector.
  2. Connect the UXGA OUTPUT HD15F connectors to up to1 six acceptors (for example, display 1 to display 6).
  3. Connect the power cord2 (not shown in this illustration).
  4. Adjust3 the UXGA EQ. cable compensation equalization level, if required.
  5. Set the ID BIT switches 4 and 11 on the underside to ON (by sliding them to the left). This would enable a notebook or laptop (if connected instead of a computer) to output an UXGA signal to an external VGA monitor.

When not all outputs are required, connect only the outputs that are required and leave the other outputs unconnected
We recommend that you use only the power cord that is supplied with this machine
Use a screwdriver to carefully rotate the trimmer, adjusting the appropriate level

Technical Specifications

INPUTS:| VIDEO: 1 VGA/XGA on an

HD15F connector

| AUDIO: 1 audio stereo 1Vpp/10kO on RCA connectors
---|---|---
OUTPUTS:| VIDEO: 2 VGA/XGA on HD15F

connectors

| AUDIO: 2 audio stereo 1Vpp/150O on RCA connectors (max.output 5 Vpp.)
BANDWIDTH:| VIDEO: 340MHz| AUDIO: 100 kHz
DIFF. GAIN:| 0.04%
DIFF. PHASE:| 0.07 Deg
VGA LEVEL CONTROL:| -0.7 to + 5.1dB
AUDIO CONTROL:| -55dB to + 6dB
AUDIO THD:| 0.02%
AUDIO 2nd HARMONIC:| 0.003%
VIDEO S/N RATIO:| VIDEO: 77dB| AUDIO 85dB
DIMENSIONS:| 16.5cm x 12 cm x 4.5 cm (6.5” x 4.7” x 1.8”, W, D, H.)
POWER SOURCE:| 12VDC, 100mA
WEIGHT:| 0.7 kg. (1.5 lbs.) approx.
ACCESSORIES:| Power supply
OPTIONS:| VA-50P rack mountable power supply with six 12VDC outlets. RK-50RN rack adapter
INPUTS:| 1 XGA on an HD15F connector
---|---
OUTPUTS:| 6 XGA on HD15F connectors
MAX. OUTPUT LEVEL:| 1.7Vpp
BANDWIDTH:| 500MHz
DIFF. GAIN:| 0.09%
DIFF. PHASE:| 0.01 Deg.
K-FACTOR:| <0.05%
S/N RATIO:| 72dB
CONTROLS:| 0 to +10dB EQ.
COUPLING:| DC
POWER SOURCE:| 100-240 VAC, 50/60Hz, 18VA
DIMENSIONS:| 19 inch (W), 7 inch (D) 1U (H) rack mountable
WEIGHT:| 2.7 kg. (6 lbs.) approx.
ACCESSORIES:| Power cord

LIMITED WARRANTY

Kramer Electronics (hereafter Kramer) warrants this product free from defects in material and workmanship under the following terms.

HOW LONG IS THE WARRANTY
Labor and parts are warranted for seven years from the date of the first customer purchase.

WHO IS PROTECTED?
Only the first purchase customer may enforce this warranty.

WHAT IS COVERED AND WHAT IS NOT COVERED
Except as below, this warranty covers all defects in material or workmanship in this product. The following are not covered by the warranty:

  1. Any product which is not distributed by Kramer, or which is not purchased from an authorized Kramer dealer. If you are uncertain as to whether a dealer is authorized, please contact Kramer at one of the agents listed in the Web site www.kramerelectronics.com.
  2. Any product, on which the serial number has been defaced, modified or removed.
  3. Damage, deterioration or malfunction resulting from:
  4. Accident, misuse, abuse, neglect, fire, water, lightning or other acts of nature
  5. Product modification, or failure to follow instructions supplied with the product
  6. Repair or attempted repair by anyone not authorized by Kramer
  7. Any shipment of the product (claims must be presented to the carrier)
  8. Removal or installation of the product
  9. Any other cause, which does not relate to a product defect
  10. Cartons, equipment enclosures, cables or accessories used in conjunction with the product

WHAT WE WILL PAY FOR AND WHAT WE WILL NOT PAY FOR
We will pay labor and material expenses for covered items. We will not pay for the following:

  1. Removal or installation charges.
  2. Costs of initial technical adjustments (set-up), including adjustment of user controls or programming. These costs are the responsibility of the Kramer dealer from whom the product was purchased.
  3. Shipping charges.

HOW YOU CAN GET WARRANTY SERVICE

  1. To obtain service on you product, you must take or ship it prepaid to any authorized Kramer service center.
  2. Whenever warranty service is required, the original dated invoice (or a copy) must be presented as proof of warranty coverage, and should be included in any shipment of the product. Please also include in any mailing a contact name, company, address, and a description of the problem(s).
  3. For the name of the nearest Kramer authorized service center, consult your authorized dealer.

LIMITATION OF IMPLIED WARRANTIES
All implied warranties, including warranties of merchantability and fitness for a particular purpose, are limited in duration to the length of this warranty.

EXCLUSION OF DAMAGES
The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall not be liable for:

1. Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss of time, commercial loss; or:
2. Any other damages, whether incidental, consequential or otherwise. Some countries may not allow limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations and exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights, which vary from place to place.
NOTE : All products returned to Kramer for service must have prior approval. This may be obtained from your dealer.

This equipment has been tested to determine compliance with the requirements of:

  • EN-50081: “Electromagnetic compatibility (EMC); generic emission standard.
    • Part 1: Residential, commercial and light industry”
  • EN-50082: “Electromagnetic compatibility (EMC) generic immunity standard.
    • Part 1: Residential, commercial and light industry environment”.
    • CFR-47: FCC Rules and Regulations:
    • Part 15: “Radiofrequency devices
    • Subpart B – Unintentional radiators”

CAUTION!

  • Servicing the machines can only be done by an authorized Kramer technician. Any user who makes changes or modifications to the unit without the expressed approval of the manufacturer will void user authority to operate the equipment.
  • Use the supplied DC power supply to feed power to the machine.
  • Please use recommended interconnection cables to connect the machine to other components

For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback.

Safety Warning:
Disconnect the unit from the power supply before opening/servicing. Kramer Electronics, Ltd.
Web site: www.kramerelectronics.com
E-mail: info@kramerel.com
P/N: 2900-000097 REV 4

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals