UNILOOK WB-234WS-EN 2K Security Camera Wireless Outdoor User Manual

UNILOOK WB-234WS-EN 2K Security Camera Wireless Outdoor User Manual

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference.
2. this device must accept any interference received, including interference that may cause undesired operation. Any changes or ( ( modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, this equipment should be installed and operated with minimum distance between 20cm the radiator your body:
Use only the supplied antenna.

Packing list

1. Camera*1
2. Bracket*1
3. Mounting kit*1
4. USB charging cable *1
5. Operation instruction*1

Product Appearance

Camera

Quick start

The smart battery camera supports battery-powered supply and AC-powered supply.

Download and install the App

The wireless smart battery camera supports Android and iOS App.
Method   1: Download ‘VicoHome’ APP from APP Store(iOS) or Google Play (Android).
Method 2: Scan APP QR code to download it.
For your best experience, please scan the QR code below with your mobile phone, install the app, and follow the instruction to complete the user registration.

Download App

Scan QR code or go to the link to download and install the

Add the device
Sign in to the App connect to Wi-Fi and add the device according to the prompts (please bring the device close to the router when configuring).

Set up the camera

1. Click the “Add Camera Now” in the App and enter the Wi-Fi network name and password that you want the camera to connect.

To ensure a longer distance connection, the camera only supports the 2.4Ghz Wi-Fi with stronger wall penetration capability and does not support Wi-Fi for enterprise-level authentication currently. Please ensure that the entered Wi- Fi meets the requirements. After completion, click “Continue” to generate the QR code for pairing the camera.

2. After pressing the camera switch for 3 seconds, the camera will turn on. The camera will emit the scanning sound “Ding Dong Ding Dong” after itis turned on (if you do not hear it, please double click the power button),

3. Take the lens of the camera facing the QR code generated on VicoHome about 20 cm (7 inches) until you hear a “Ding” sound.

4. After a while, the camera will give out a prompt sound of a successful connection. At this moment, please set the name for the device on the App and select the location you want to place the device. Click “Continue” to complete the pairing.

Possible problems with binding:

• When you hear the “Wi-Fi Password Error”, please check whether the Wi-Fi password you entered in the App is correct;
• When you hear the “Authentication error”, please ensure that your Wi-Fi network is not an enterprise-level network, and the device supports only the network with the security level below WPA-2;
• When you hear the “Wi-Fi not found”, please check whether you select or enter the correct Wi-Fi name, and place the device near the Wi-Fi router and ensure that the router is powered on. Please note that 5Ghz Wi-Fi cannot be sear -ched by the device:
• When you hear the “Retrieving IP timeout”, it indicates that the number of devices connected to the router in your home is too many to connect more devices. Please remove some of the connected devices that are not commonly used or restart the router to clear the unconnected devices. You may need to contact the router administrator;
• When you hear the “Cloud service connection fail”, please check whether your router is connected properly to the external network. When you hear this error prompt, it is common on the condition of network disconnection or that the selected router in your home is a local area network server. Please ensure that the network conne- ction is normal, and try to temporarily turn off the firewall to connect again.

Install the camera

You can the camera wall mounted on the wall.

Select a good spot for your camera
Select a good spot for your camera, please install the camera in a position where its view is not blocked and ensure that it is within the coverage of the Wi-Fi network. The PIR infrared sensor is more sensitive to movements across the camera’s field of view than movements toward or away from the camera.

For outdoor use, please install the camera upside down to maximize the waterproof performance and the human body infrared sensor’s effectivity.

Camera Installation Angle When installing the camera, it is not suggested to have the PIR sensor vertically face the moving object, otherwise it may not detect the motion events. It is suggested to make the angle between the PIR sensor and detected object greater than 10 degrees.

Install the bracket

Screw fixing:

Fix the camera to the desired location. You can directly place the camera on a flat surface or fix the bracket to the wall or ceiling by screws.

Fix the camera
Put the camera up side down and then fix the camera to the bracket by a screw.

Share the camera

When you want to let other family members or friends view the camera, you can use this feature. Only the admin user who is the first to add the camera is able to share the camera and manage the settings for the camera. The shared users have limited access rights.

1. Steps for Admin User

2. Find the camera you want to share on the App Homepage, then tap the “Share” button. You can also tap the camera “Camera Setting” icon, then tap the “Share” button;

3. Tap “Share Camera”, a QR code will be generated for sharing

4. Steps for Shared User
   For family members or friends you want to share, find “Addfriend camera” on the home page to enter the code page ofscan, then scan the QR code generated on the phone of theadmin, then send the access request to the admin user.

5. Steps for Admin User
   You will receive a confirmation notice and can complete the sharing afterto accept

Charge The Camera

The app will remind you to charge the camera when the battery isshort. Please use the Micro USB cable to connect the charging adapter5V/1.5A to charge the camera. During charging, the indicator lightcamera is solid yellow, and when the camera is fullycharged, the indicator light will turn solid green. The camera will take 15hours to fully charge.

Indicator Light Status

Firmware upgrade

When you connect your camera through the App, it will ask you if the latest firmwareis it availabe. You can also manually check the firmware versionin the app settings.

Please make sure your camera is fully charged orconnected to the power adapter before updating the firmware, pleasedo not cut off the power supply during the update

Works with Alexa

(Some models of cameras support)

Combine Unilook battery Camera with Alexa for hands-free home monitoring. When anyone triggers Unilook’s battery camera, your Echo device will illuminate and make an announcement, so you’ll always know when someone’s there. And if you have an Echo Show or Echo Spot, you can also see, hear and speak to anyone captured on camera.

If you want to use the Alexa function, you need to have an Amazon Alexa echo show smart voice control device with a screen, and then connect the camera for voice contro

Alexa operation can be done through the VichoHome APP: User-FAQSearch for Alexa, check how to connect.

FAQ

1.Q:Camera permission management: How to invite family and friends to use

my cameratogether?

2.Q:Why doesn't the Wi-Fi name appear when I connect to Wi-Fi?

3.Q: Will the camera show red lights when night vision is activated?

A: The built-in infrared lamp beads make the camera only show some dim red lights when night vision is activated, but the image quality is still clear under no light environment.

4. Q:Does the camera support the Onvif and RTSP protocols

A:The camera does not support the onvif and RTSP protocol

Q:Can the camera be connected to DVR/NVR for use?

A:The camera does not support connection to DVR/NVR use

6.Q:Can the camera preview on PC or add to a third-party software preview?

A: The camera does not support the PC preview and cannot be added to the third-party software preview. The installation of the camera is simply suitable for Volkswagen users. It only needs a smartphone to add a camera to remote preview.

7. Q:Can the camera be used normally without buying the Al function?

A:It can be used normally. The Al function is only for retrieval and extraction of people, cars, pets, and parcels for video content; without buying Al functions, the camera can also be used normally. The camera supports cloud storage or installation of SD card storage, and can also receive alarm pushes, set camera functions, etc. normally.

8.Q:What are the requirements for Wi-Fi?

A: Please use a 2.4GHz wireless network. The device does not support the 5GHz wireless network. Meanwhile, please set the Wi-Fi authentication method to WPA2-PSK or other lower level of security method. A password is required.

9.Q:How far should the camera be placed from the router

A: After testing, the Wi-Fi connection distance can normally reach up to 150 meters in the open area. However, the actual situation depends on the strength of Wi-Fi and its surrounding environment (thick walls, electromag- netic devices, large metal objects will all cause interference to the Wi-Fi signals). If the camera connection signal is weak or unstable, please place the camera as close to the router as possible.

10.Q:What is the maximum length of recording time?

11.Q:How to quickly view videos by category

12.Q: What should I do when the device is in malfunction?

A: Long press the power button for 3 seconds to restart it. If there is no response, you can remove the rubber plug at the button of the camera. Press the reboot hole with a pointed object to restart the camera.

Thank you for choosing Unilook Battery Powered security camera! If you have any ouestions about our products and service ,Please do not hesitate to contact us

www.anpvizsecurity.com
support@anpvizsecurity.com

Made in China

References

• Anpviz Security | IP Security Camera Manufacturer & Supplier Found In 2014

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>