OREI UHD-EX230A-K 4K HDMI Extender Over Ethernet User Manual
- June 14, 2024
- OREI
Table of Contents
**OREI UHD-EX230A-K 4K HDMI Extender Over Ethernet User Manual
**
Thank you for purchasing this product
Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lightning strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the service life of your equipment.
Introduction
This 18Gbps HDMI Extender can extend HDMI HD signal and IR control signal to a
distance up to 230ft / 70m via a single CAT6/6a cable, which can achieve zero-
delay, uncompressed long-distance transmission between the transmitter and
receiver. Video resolution is up to 4K2K@60Hz. It supports EDID copy pass-
through function between the source device and display device. It supports POC
function.
This Extender can be widely used in multi-media conference halls, TV teaching
and large-screen displays.
Features
- HDMI2.0b and HDCP 2.2 compliant
- Support 18Gbps video bandwidth
- Support video resolution up to 4K2K@60Hz RGB/YCBCR 4:4:4
- The transmission distance can be extended up to 230ft / 70m via a single CAT6/6a cable
- Support HDR, HDR10, HDR10+, Dolby Vision, HLG
- Support bi-directional IR control signal pass-through
- Audio formats: LPCM 7.1, Dolby True HD, DTS HD Master
- EDID copy pass-through function between the source device and display device
- Support ARC and audio de-embedding, audio is output through the optical fiber port of the receiver
- Support bi-directional POC (Power over Cable) function
- Compact design for easy and flexible installation
Package Contents
| 1. | 18Gbps HDMI Extender (Transmitter) | 1pcs |
|---|---|---|
| 2. | 18Gbps HDMI Extender (Receiver) | 1pcs |
| 3. | IR Blaster cable (1.5 meters) | 1pcs |
| 4. | IR Wideband Receiver cable (1.5 meters) | 1pcs |
| 5. | Mounting Ears | 4pcs |
| 6. | Machine Screws (KM3*4) | 8pcs |
| 7. | 12V/1A Locking Power Adapter | 1pcs |
| 8. | User Manual | 1pcs |
Specifications
Technical
HDMI Compliance| HDMI 2.0b
HDCP Compliance| HDCP 2.2
Video Bandwidth| 18Gbps
Video Resolution| Up to 4K2K@60Hz RGB/YCBCR 4:4:4
IR Level| 5Vp-p
IR Frequency| Wideband 20K-60KHz
Transmission Distance| 4K2K@60Hz 4:4:4–70m, 1080P–70m (CAT6/6a cable)
Color Depth| 8/10/12bit
Color Space| RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0
HDR| HDR, HDR10, HDR10+, Dolby Vision, HLG
Audio Formats| HDMI: LPCM 7.1CH, Dolby True HD, and DTS-HD MasterOptical:
Dolby 5.1, DTS 5.1, PCM 2.0
Connection
Transmitter| Input: 1 × HDMI IN [TypeA, 19-pin female] Output: 1 × HDMI OUT
[RJ45]1 × CAT OUT [RJ45]Control: 1 × SERVICE [Micro-USB jack]1 × IR IN [3.5mm
Stereo Mini-jack]1 × IR OUT [3.5mm Stereo Mini-jack]
Receiver| Input: 1 × CAT IN [RJ45]Output: 1 × HDMI OUT [TypeA, 19-pin female]
1 × TOSLINKControl: 1 × SERVICE [Micro-USB jack]1 × IR IN [3.5mm Stereo Mini-
jack]1 × IR OUT [3.5mm Stereo Mini-jack]
Mechanical
Housing| Metal Enclosure
Silkscreen Color| Black
Dimensions| Transmitter / Receiver: 90mm (W)×68mm (D)×18mm (H)
Weight| Transmitter: 160g, Receiver: 155g
Operating Temperature| 32 – 104°F / 0 – 40°C
Storage Temperature| -4 – 140°F / -20 – 60°C
Relative Humidity| 20~90% RH (Non-condensing)
Power Consumption (Max)| 3.36W (Max)
Power Supply| DC 12V/1A;Support bi-directional POC function
Operation Controls and Functions
Transmitter Panel
| No. | Name | Function Description |
|---|---|---|
| 1. | SERVICE | Firmware update port. |
| 2. | HDMI OUT | HDMI signal loop output port. Connect to HDMI display devices |
with HDMI cable.
3.| HDMI IN| HDMI signal input port. Connect to HDMI source device with HDMI
cable.
4.| CAT OUT| RJ45 connector for connecting the CAT IN port of the Receiver
with CAT6/6a cable.
5.| Link Signal Indicator (Green)|
- Illuminating: Transmitter and Receiver are in good connection status.
- Flashing: Transmitter and Receiver are in poor connection status.
- Dark: Transmitter and Receiver are not connected.
6.| Data Signal Indicator (Orange)|
- Illuminating: HDMI signal with HDCP.
- Flashing: HDMI signal without HDCP.
- Dark: No HDMI signal.
7.| IR IN| Connect to IR receiver cable, the IR receive signal will emit to
the IR OUT port of the Receiver.
8.| IR OUT| Connect to IR blaster cable, the IR emit signal is from the IR IN
port of the Receiver.
9.| DC 12V| DC 12V/1A power input port.Note that the extender supports POC
function, it means that either Transmitter or Receiver is connected to 12V/1A
power supply, the other doesn’t need power supply.
10.| EDID DIPswitch| Use the DIP switch to set EDID. (Switching to the upper
end indicates 1; switching to the lower end indicates 0.)
11 – EDID information is copied from the display at the RX.
10 – EDID is preset to 4K@60Hz Stereo
01 – EDID is preset to 1080p Stereo
00 – EDID information is copied from the HDMI OUT at the TX.
Receiver Panel
| No. | Name | Function Description |
|---|---|---|
| 1. | SERVICE | Firmware update port. |
| 2. | HDMI OUT | HDMI signal output port. Connect to HDMI display devices with |
HDMI cable.
3.| TO SLINK| Optical fiber audio output port. Connect to amplifier with
optical cable.
4.| CAT IN| RJ45 connector for connecting the CAT OUT port of the Transmitter
with CAT6/6a cable.
5.| Link Signal Indicator (Green)|
- Illuminating: Transmitter and Receiver are in good connection status.
- Flashing: Transmitter and Receiver are in poor connection status.
- Dark: Transmitter and Receiver are not connected.
6.| Data Signal Indicator (Orange)|
- Illuminating: HDMI signal with HDCP.
- Flashing: HDMI signal without HDCP.
- Dark: No HDMI signal.
7.| IR IN| Connect to the IR receiver cable. The IR signal will send to the IR
OUT port of the Transmitter.
8.| IR OUT| Connect to the IR blaster cable, the IR signal is from IR IN port
of the Transmitter.
9.| DC 12V| DC 12V/1A power input port.Note that the extender supports POC
function, it means that either Transmitter or Receiver is connected to 12V/1A
power supply, the other doesn’t need power supply.
10.| ARC DIP switch| Use the DIP switch to control ARC function. (Switching to
the upper end indicates 1; switching to the lower end indicates
0. Note that only the left switch is valid, the right switch is invalid.)
1X – Enable the ARC function
0X – Disable the ARC function
**IR Receiver and Blaster pin’s definition is as below:
**
Note:
When the angle between the IR receiver and the remote control is ± 45 °, the
transmission distance is 0-5 meters;
When the angle between the IR receiver and the remote control is ± 90 °, the
transmission distance is 0-8 meters.
Application Example
Registration Page
Please Activate your warranty by registering our product through the link below – www.orei.com/register
Technical Support
Need Help?
Our experienced Technical Support Team is here for you to answer your
questions, give technical advice or help troubleshoot your project to get you
installed on time and on budget. Call, email or chat with us now.
OREI Live Technical Support Hours
US team (US/Canada/Mexico): Monday-Friday, 9 a.m. – 6 p.m. Central Time
Support Email – [email protected] |Support Number –
877-290-5530
Or
Chat Live onwww.orei.com
Send us an instant message now. Our Technical Support Team will respond
momentarily. Available during live support hours.
18Gbps HDMI
Extender (70m) with POC
References
- OREI | Pro AV Solutions & Audio Video HDMI Accessories – OREI.COM
- OREI | Warranty Registration Form - OREI – OREI.COM