KRAMER KT-107-OWLK On Wall Lock User Guide
- June 14, 2024
- Kramer
Table of Contents
KT-107-OWLK Quick Start Guide
KT-107-OWLK On Wall Lock
This guide helps you install and use your KT-107-OWLK for the first time.
Go to
www.kramerav.com/downloads/KT-107-OWLK
to download the latest user manual and check if firmware upgrades are
available.
Step 1: Check what’s in the box
KT-107-OWLK On-Wall Lock
2 Installation screws
3 washers
1 Quick start guide Kramer screwdriver
Step 2: Get to know your KT-107-OWLK
The KT-107-OWLK On-Wall Lock secures KT-107, KT-107RB and KT-107S touch panels
safely to a wall.
Step 3: Secure KT-107-OWLK to a wall:
The following diagrams illustrate attaching the On-Wall Lock mechanism with
the short part above and the long part below. You can also attach the other
way around.
- Insert the 2 screws (supplied) into the screw openings and insert the washers from below.
- Place the short part (together with the screws) over the installed on-wall mount unit.
- From below, slide the long frame part towards the short frame part.
- Loosely screw the top frame part to the lower frame part (do not tighten the screws).
- After hanging the KT-107 on the wall, tighten the two screws until the KT-107 is securely fixed in place.
Scan
for full manual
https://goo.gl/RzY8UR
KT-107-OWLK Quick Start (P/N: 2900-300795QS REV 2)
WWW.KRAMERAV.COM