ZYC ENERGY SIMPO 5000 Battery Module User Guide
- July 3, 2024
- ZYC ENERGY
Table of Contents
- ZYC ENERGY SIMPO 5000 Battery Module
- Product Usage Instructions
- Safety
- Contents in SIMPO 5000 Package
- SIMPO Cabinet
- Tools
- Extra Accessories
- SIMPO 5000 Interface & LED Status
- Minimum Clear Space Requirement of Cabinets
- Fix The Modules to The Cabinet
- Connect To The Inverter
- Switch to No Communication Mode
- Power ON & Power OFF
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ZYC ENERGY SIMPO 5000 Battery Module
Specifications
- Dimension (W x D x H): SIMPO Cabinet 6 – 620 x 600 x 1270mm, SIMPO Cabinet 10 – 620 x 600 x 1890mm
- Max. Qty of modules: SIMPO Cabinet 6 – 6 (30kWh), SIMPO Cabinet 10 – 10 (50kWh)
- Max. continuous current: 625A, 1250A
- IP Rate: IP20
- Weight: SIMPO Cabinet 6 – 120 kg, SIMPO Cabinet 10 – 90 kg
Product Usage Instructions
Contents in SIMPO 5000 Package
| Number | Part Name | Quantity |
|---|---|---|
| 1 | Terminal Resistor | 1 |
Tools Required for Installation
- Safety Shoes
- Insulated Gloves
Extra Accessories
The following parts are necessary for connecting with the inverter:
- DC Cables With terminal SC xxx-12
- PE Cable With terminal SC xx-6
SIMPO 5000 Interface & LED Status
The front panel of SIMPO 5000 has LEDs indicating battery status and functions:
- ALM LED: Operational State – Error occurs There is no error existing
- RUN LED: Operational State – The battery is ON and can be charged and discharged if no error / The battery is not working
- SOC LED: SOC Indicator – 75%
Frequently Asked Questions (FAQ)
Q: Where can I purchase SIMPO WiFi for the system?
A: SIMPO WiFi can be bought from ZYC’s dealers.
Safety
When installing, commissioning, operating and maintaining the product, the
safety requirements in the manual should be strictly observed. Incorrect
operation or work may lead to damage to the product and other properties or
injury or death of the operator or third parties.
When fixing the product with screws or other parts, use the correct tool and
reinforce it with the torque indicated in the manual or on the label of the
product, otherwise the product may be unstable or damaged. When using
different tools, master the tools in advance to prevent the installer from
being injured due to improper handling.
Please read this manual thoroughly before installation to ensure proper and
safe installation and use of the product.
Warning & Caution
- Installers and users are obliged to familiarise themselves with this manual.
- Power Cables and plugs have high voltage from the battery, be careful when wiring.
- Ensure that a fire extinguisher is in place prior to installation and use.
- Installation and operation must be carried out by qualified personnel and the system must be installed in restricted access areas.
- The battery module is with certain weight, it is better to be installed by at least two personel. With the help of tools if necessary.
Contents in SIMPO 5000 Package
| Number | Part Name | Quantity |
|---|---|---|
| 1 | Terminal Resistor | 1 |
| 2 | PE Cable | 1 |
| 3 | Com Cable | 1 |
| 4 | Power Cable(+) | 1 |
| 5 | Power Cable(-) | 1 |
| 6 | Bolt M6 × 16 | 4 |
SIMPO Cabinet
Specification| SIMPO
Cabinet 6
| SIMPO
Cabinet 10
---|---|---
Dimension (W x D x H)| 620 x 600
x1270mm
| 620 x 600
x1890mm
Max. Qty of modules| 6(30kWh)| 10(50kWh)
Max. continuous current| 625A| 1250A
IP Rate| IP20
Weight| 120 kg| 90 kg
Tools
Extra Accessories
The parts below are not included in the accessories we offered, but necessary for connecting with inverter.
- DC Cables With terminal SC xxx-12
- PE Cable With terminal SC xx-6
- Com cable with shield (Cat5 or higher)
- SIMPO WiFi
- Select appropriate cables according to the power of your system and electrical requirements.
- PE Cables(CSA≥25 mm ) with Terminal(SCxx‑6).
- Communication cable with shield (Cat5 or higher).
- SIMPO WiFi can be bought from ZYC’s dealers.
SIMPO 5000 Interface & LED Status
| Letter | Label | Function | Letter | Label | Function |
|---|---|---|---|---|---|
| A | MCB | Circuit Breaker | F | ALM | Alarming LED |
| B | + | DC+ Port | G | RUN | Status LED |
| C | INV | Inverter Com | H | SOC | SOC Indicator |
| D | OUT | Parallel Com Out | I | ON/OFF | Switch On/OFF |
| E | IN | Parallel Com In | J | – | DC- Port |
There are three LEDs on the front panel of SIMPO 5000 that indicate battery status,ALM, RUN and SOC.
Minimum Clear Space Requirement of Cabinets
Connect the Power Cables and PE Cable & Adjust the Feet For SIMPO Cabinet 6
Connect the Power Cables and PE Cable & Adjust the Feet For SIMPO Cabinet 10
Fix The Modules to The Cabinet
Connect Power Cables & PE Cables & Com Cables & Terminal Resistor
Connect To The Inverter
Connect the power cables and communication cable between battery system and inverter.
Notice:
- The communication cable should be Cat 5 or upper.
- For no communication mode, there is no need to connect the communication cable.
Definition of INV Port on Battery interface
| PIN No. | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
|---|---|---|---|---|---|---|---|---|
| Definition | Null | Null | Null | CAN_H | CAN_L | Null | RS485B | RS485A |
Change the communication cable’s wires order if necessary. Matching with the CAN Communication inverters as below:
| SIMPO 5000 | Victron | Selectronic | SMA | Studer | Steca | Deye | Noark | GoodWe | |
|---|---|---|---|---|---|---|---|---|---|
| CAN_H | 4 | 7 | 1 | 4 | 4 | 4 | 4 | 4 | 4 |
| CAN_L | 5 | 8 | 2 | 5 | 5 | 5 | 5 | 5 | 5 |
Matching with the RS485 Communication inverters as below:
| SIMPO 5000 | Lux Power | |
|---|---|---|
| RS485A | 8 | 2 |
| RS485B | 7 | 1 |
Connect Communication Cables for Multiple Cabinets In Parallel
Connect Power Cables & PE Cables & Communication Cable
Note:
- The maximum number of paralleled SIMPO 5000 modules is 64.
- When multiple cabinets are connected, a DC box is needed to combine the power cables from the cabinets.
- The DC power cable length for all the cabinets should be approximately equal.
- The communication cable length ≤5 m.
Switch to No Communication Mode
- The SIMPO 5000 can operate normally without communication with the inverter. To switch to no-communication mode, please follow the procedures in the right figure.
- Once the BMS is connected to the inverter with a communication cable, i t w i l l a utomat i ca l l y swi tc h to t he communication mode.
Operating procedure:
- Power on the battery.
- Press the “ON/OFF” button twice within 3 minutes.
- The SOC indicators will flash 3 times.
Power ON & Power OFF
System Start Up
- Turn on the DC breaker between battery and inverter (If any).
- Turn on all of the MCBs.
- Press the ‘ON/OFF’ button of Master battery for 1 seconds to power on batteries.
- Turn on the inverter.
System Shutdown
- Shut down the inverter.
- Turn off the DC breaker between battery and inverter (If any).
- Press and hold the ON/OFF button for 3 seconds on the Master battery to shut it down .
- Make sure the LED on the battery is off.
Connect to Internet & WiFi Usage & ZYC Portal & ZYC Assist APP
There are two options to connect to the internet with SIMPO WIFI
- Connect SIMPO WIFI to the router directly with a network cable.
- Set up a wireless connection for SIMPO WIFI through ZYC Assist APP.
When the app is connecting with the hotspot of the SIMPO WiFi, follow the below steps:
Contact us
+86 (0)755-2839 4019
sales@zyc.energy
service@zyc.energy
www.zyc.energy
WhatsApp: +86 19168831702
www.zycportal.com
Guangke Road 1, Pingshan, Shenzhen, P.R. China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>