R for Rabbit T20 Plus Smart Play Baby Tricycle Instruction Manual

June 14, 2024
R for Rabbit

R for Rabbit T20 Plus Smart Play Baby Tricycle

*Picture shown is for illustrative purpose only. Actual product may vary from image.

TINY TOES T20 PLUS
Smart Plug N Play Baby Tricycle

Installation & User Manual

  • IMPORTANT – KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
  • FAILURE TO OBSERVE THESE INSTRUCTIONS MAY AFFECT THE SAFETY OF YOUR CHILD!

Overview

  1. Steel Frame
  2. Front Basket
  3. Front Wheels & Mudguard
  4. Cushion Seat
  5. Rear Wheel Set
  6. Front Handle
  7. Parental Handle
  8. Wheel Cap
  9. Rear Basket
  10. Nuts & Bolts
  11. Plug & Play Pins
  12. Movement Rod
  13. Bottom Lock
  14. Rod
  15. Guard Rail

Steps of Installation

  1. Un box the Tricycle
  2. Install the mudguard into the front body of tricycle as shown in ref pie
  3. Insert the main body into front ones post fitting with round black vicer given.
  4. Install the front basket as shown in pie
  5. Install the front steering part with the help of push pin given on both the sides (Front and Back Side)
  6. Tighten up the fork screw given as shown in picture
  7. Unscrew the screws given on seat part to install the seat
  8. Fit the Seat as shown in picture and post that tighten the same with screws.
  9. For installing rear wheels, firstly fit the black vicer given into the small rod
  10. The same needs to be then inserted from front side of the wheel
  11. After inserting a small rod from front side, put the second vicer into the same as shown in picture
  12. Cover the front part of wheel with the cap given along with the product
  13. Fix the wheel with the help of pushing a red button given in bottom. The same procedure needs to be repeated for second wheel as well.
  14. Post installing both the wheels unscrew the fork screw given on back side to install the rear basket.
  15. Fix the rear basket and tighten the same with the help of fork screw
  16. Install the bell with the help of screw
  17. Insert the rod from bottom side after removing screws and cover
  18. Fix the screw and cover the same as shown in pie
  19. Install the parental control and tighten the same with fork screw
  20. Fix the cup holder
  21. Insert the hook shaped rod in front just above the mudguard and tighten it using the nut in backside. Make sure you install the same on left side.

ATTENTION
Please read the instructions before using. It will guide you on how to use and assemble the tricycle.

Notice

  1. This tricycle is fit for children 1.5-5 years old.
  2. Never leave your child unattended when in use.
  3. Avoid using tricycle on near threshold, stairs or irregular surfaces, it may results in an injury.
  4. The tricycle is suitable to carry weight is up to 25kgs
  5. Not recommended to use the tricycle on the slope driveaway, road or street.
  6. The tricycle should be used by caution to avoid any falls or collisions.

WARNING

  1. Should be assembled by an adult.
  2. Keep it away from the street or a road with traffic.
  3. Do not overload.
  4. Keep it away from fire.

MAINTENANCE

  1. Clean the tricycle with a damp cloth instead of auto wax or water.
  2. Keep away from fire and other high temperature areas.
  3. Please check on the screws periodically to ensure it is not loose or missing.

Designed & Marketed By:

  • R FOR RABBIT BABY PRODUCTS PVT. LTD.
  • Add: 708, 7th Floor, Pinnacle Business Park, Corporate Road, Prahlad Nagar, Ahmedabad, Gujarat 380015
  • C: +91-79-410-57595 I
  • W: www.rforrabbit.com
  • E: customercare@rforrabbit.com
  • Manufactured by: Trifox Toyz LLP, Al Site 4, Industrial Area, Sahibabad, UP – 201010

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals