PUREMATE PM 820 Ceramic Tower Heater Instruction Manual

: June 14, 2024
: PureMate

Table of Contents

PUREMATE PM 820 Ceramic Tower Heater
Product Information
Safety Precautions
Product Usage Instructions
Tip-Over Protection
SAFETY PRECAUTIONS
components
operating instructions
tip-over protection
overheat protection
cleaning & maintenance
specifications
Disposal of this device
DECLARATION OF CONFIRMITY
ABOUT COMPANY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PUREMATE PM 820 Ceramic Tower Heater

Product Information

Product Name: Ceramic Tower Heater
Model Number: PM 820
Product Usage: Suitable for well insulated spaces or occasional use

Safety Precautions

Read and follow all instructions carefully
This appliance can be used by children aged 8 years and above, and persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge if they have been given supervision or instruction concerning the safe use of the appliance
Do not use the heater without supervision by children
Some parts of this product can become very hot and cause burns, so be cautious where children and vulnerable people are present
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid hazards
Do not cover the heater to avoid overheating
Do not locate the heater immediately below a socket-outlet
Avoid using the heater in the immediate surroundings of a bath, shower, or swimming pool
This appliance is only for household use
Do not use this heater in small rooms when occupied by persons not capable of leaving the room on their own, unless constant supervision is provided
Do not use the heater if it has been dropped or shows visible signs of damage
Use the heater on a flat and stable surface or fix it to the wall as applicable
Keep textiles, curtains, or any other flammable material at least 1 meter away from the air outlet to reduce the risk of fire
Do not attempt to repair, disassemble, or modify the appliance as there are no user-serviceable parts inside
Disconnect the heater from mains when not in use or when moving or cleaning
Avoid touching the hot surface of the heater to prevent burns

Product Usage Instructions

Before using the heater, ensure that it is placed on a flat and stable surface. Do not place it on an incline or decline, as it may cause damage.
Turn off all the controls of the heater.
Plug the heater directly into a standard grounded AC outlet.
To activate the heater, turn the Power&Oscillation knob to the desired function.
To set the desired temperature, turn the thermostat switch clockwise or anti-clockwise. The thermostat switch will automatically maintain the room temperature at the desired level.
To completely shut off the heater, turn all the switches to the off position and remove the plug from the socket-outlet when not in use.
Note: Do not force the knob beyond its normal stop position.

Tip-Over Protection

This heater is equipped with a safety switch that automatically turns off the appliance if it falls over or is at an excessive angle from the horizontal. This feature helps prevent accidents, and the heater will resume operation when it is put back upright.

Thank you for purchasing the innovative product the PureMate Ceramic tower Heater. We wish You many years of warmth with this efficient and effective product.

SAFETY PRECAUTIONS

When using electrical appliances, basic safety Precautions should always be followed including the Following.
Read and Follow all Instructions Carefully:
PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY BEFORE USING THE APPLIANCE.
- This appliance can be used by children aged from 8 Years and above and persons with reduced physical, Sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or Instruction concerning use of the appliance in a safe Way and understand the hazards involved. Children Shall not be made by children without supervision.
- Children of less than 3 year should be kept away unless Continuously supervised. Children aged from 3 years and less than 8 years shall only switch on/off the Appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the Hazards involved. Children aged from 3 year and less Than 8 years shall not plug in, regulated and clean the Appliance or perform user
- CAUTION – Some parts of this product can become very hot and cause burns. Particular attention has to be given where childr en and vulner able people are present.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in or der t o av oid a haz ar d.
- Warning: In order to avoid overheating, do not cover the heater. The meaning of figure in marking is “D O NO T CO VER”.
- The heater must not be located immediately below a socket-outlet.
- Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
- This appliance only for household use.
- WARNING: Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided.
- Do not use this heater if it has been dropped.
- Do not use if there are visible signs of damage to the heater.
- Use this heater on a horizontal and stable surface, or fix it to the wall, as applicable.
- WARNING: To reduce the risk of fire, keep textiles, curtains, or any other flammable material a minimum distance of 1 m from the air outlet.
- Do not attempt to rep air, disassemble or mo dify the appliance. There are no user-serviceable parts inside.
- CAUTION – if using an extension lead please ensure you do not exceed the maximum rated running wattage/load of the extension lead.
- Disconnect from mains when not in use or when moving or cle aning.
- The heater is hot when in use .To avoid burns, do not let bare skin touch hot surface.

components

operating instructions

Before using the heater make sure that it is on a flat and stable surface. Damage may occur if it is placed on an incline or decline.
Turn off all the controls of the heater, and then plug directly into a standard grounded AC outlet.
To activate the heater, turn the Power & Oscillation knob to below position for required function:
T urn the thermost at s wit ch clockwise or anti-clockwise to set the desired temperature you require. The thermostat switch will keep the room temperature at the desired level automatically.
To completely shut the heater off, turn all the switches to off, and remove plug from the socket-outlet when not in use.
Note: Do not force knob beyond its normal stop position.

tip-over protection

This heater is protected with a safety switch that turns off the appliance automatically when the heater falls over, or is at an excessive angle from the horizontal. This helps prevent accidents, and the heater will resume operation when it is put back upright.

overheat protection

This heater is protected with overheat protection that switches off the appliance automatically in case of severe overheating. In this case, unplug the appliance, wait about 30 minutes for it to cool and remove any possible cause of overheating, eg. something covering the heater. Check for damage to the appliance, the cord and the plug. If there is no damage, plug the unit back in and switch it on as described above. If the heater still does not turn on, please contact Customer Service for assistance.

cleaning & maintenance

Always remove the plug from the socket-outlet and allow the heater to cool down before clean it.
Wipe the exterior surface of the heater occasionally with a soft damp cloth (not dripping wet) and dry the exterior surface before operating the heater.
WARNING:
- DO not immerse the heater in water.
- DO not use any cleaning chemicals such as detergents and abrasives.
- DO not allow the interior to get wet as this could create a hazard.
To store away the heater, put the heater back into its original package and store it in a clean dry place.
In case of malfunction or doubt, do not try to repair the heater by yourself, it may result in a fire hazard or electric shock.

specifications

Model No: PM820
Rated Voltage: 220-240V~50Hz
Power Consumption: 2000W
Product Dimensions: 18.4 x 16.8 x 46.6 cm
Box Dimensions: 21.7 x 20 x 50.5 cm
Net Weight: 2.2 Kgs
Gross Weight: 2.6 Kgs

Disposal of this device

Waste electrical products should not be disposed of with household waste. Some chemicals contained within electrical/electronic products or batteries can be harmful to health and the environment.Please recycle where facilities exist. Check with your local authority or ocal store for recycling advice.