QUKITEL C36 Smartphone User Manual
- June 14, 2024
- QUKITEL
Table of Contents
C36
User Manual
C36 Smartphone
https://oukitel.com/pages/c35-user-manual
Accessories
Battery
C36 includes an internal battery. You can track your battery status with
the icon showed on the top right of the screen.
Warning
- Use only OUKITEL-approved batteries specifically designed for you phone.
- Incompatible batteries can cause serious injuries or damage to your phone.
- Never place batteries or phones on or in heating devices such as microwave ovens, stoves, or radiators. Batteries may explode when overheated.
How to insert the card
To make sure your pad is able to make calls, insert the SIM card in the following order.
- Insert and press the ejector pin into the hole in the side to pop the card tray.
- With the pad facing up, insert the cardholder into the pad in the direction of the arrow.
How to boot
Non-removable battery
Press the power button for 3-5 seconds to boot
How to send SMS, MMS SMS
-
Open the SMS app
-
Select New Information
-
Enter a phone number or browse your contacts
-
Select Edit Information and enter your text
-
Send
MMS-video -
When writing a text message
-
Select images, videos, or other files you want to add, even you can take a new picture or video right away
-
Selecting or sending
Language switching settings
- Main menu–settings system–language and input method Language and input method–language–language adding
- Select the language you need, the system will automatically
- jump back to the language interface
- Select the icon after the language bar and drag it to the first one
SAR
- The maximum electromagnetic radiation absorption ratio (SAR) of this product is <2.0W/kg
- In line with the requirements of the national standard
EN62209-1:2016; EN 62209-2:2010; EN 62479:2010;
EN 50360:2017; EN 50566:2017;
Safety – In order to ensure safety during use of the product , you must
strictly abide by the following rules
-
The pad should be at least 15cm away from any medical implant or rhythm adjuster and never put the device in your coat pocket .
-
Do not expose the device and other batteries together with high temperatures or heat-generating equipment such as sunlight, heaters, microwave ovens, ovens, or water heaters.
Overheating of the battery can cause an explosion. -
When charging is complete or not charging, disconnect the charger from the device and unplug the charger from the outlet.
-
If the device is equipped with a non-removable battery, do not replace the battery by yourself to avoid damaging the battery or the device.
-
Use of an unapproved or incompatible power source, charger, or battery may cause fire, explosion, or other hazards.
-
Do not disassemble or reset the battery, insert other objects, immerse in water or other liquids to avoid battery leakage, overheating, fire or explosion.
-
Do not drop, crush, scratch, or puncture the battery to avoid subjecting the battery to excessive external pressure, Which may result in internal short-circuit and overheating of the battery.
-
The company does not bear responsibility for accidents caused by non-standard related charging equipment.
If you want to read the full CE compliance, please check this link: http://www.oukitel.com
Maintenance
-
Thoroughly understand the maintenance of this pad to use the pad more safely and effectively, and extend the service life of the pad as much as possible.
-
Please follow the instructions in the manual to open the pad, disassemble the accessories, and do not try other
-
Please avoid dropping, knocking, or shaking your pad.
Rough handling of the pad can cause the screen to rupture, damaging the internal circuit board and the delicate structure. -
Do not use chemical solvents or detergents to clean your pad. Wipe the pad case with a soft cotton cloth dampened with water and mild soap.
-
Clean the lens with a clean, dry, soft cloth. (Example: camera lens) and display.
-
When the charger is not in use, please unplug it from the power outlet. Do not connect the battery that has been fully charged to the charger for a long time, as overcharging will shorten the battery life.
-
This machine’s standard package (Package box-Pad-Manu- al-Protective film-Protective case-Headset-USB data cable-OTG cable-Charger)
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help This
device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions (1)this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation. This equipment complies with
FCC radiation exposure limits set forth for an uncontrolled environment.
FCC/IC RF Radiation Exposure and SAR Statements
The Smart Phone C36 has been tested for body-worn Specific Absorption
Rate(SAR) compliance. The FCC/IC has established detailed SAR requirements and
has established that these requirements. RF Exposure Information The radio
module has been evaluated under FCC Bulletin C95.1 and IEEE 1528 and found to
be compliant
to RF Exposure from radio frequency devices. This model meets the applicable
government requirements for exposure to radio frequency waves. The highest
reported SAR level for usage near the body
(10mm) is 0.565 W/kg, Body simultaneous transmission is 0.923W/kg at the same
time. SAR level for usage near the Head is 1.006 W/kg and Head simultaneous
transmission is 1.453 W/kg ，SAR level for usage near the Hotspot is 0.573W/kg
and Hotspot simultaneous transmission is 0.892 W/kg
Manufacturer Name: ShenZhen Yunui Intelligent Technology CO., LTD
Manufacturer Address:202, Building A2, Silicon Valley Power Intelligent
Terminal Industrial Park, No. 20, Dafu Industrial Zone, Kukeng Community,
Guanlan Street, Longhua District, Shenzhen China
Comes with the Google™ app and Google Chrome™ .
Android is a trademark of Google LLC
www.oukitel.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>