YOYOJAMES 911S Solar Outdoor Motion Sensor Alarm Instruction Manual
- June 14, 2024
- YOYOJAMES
Table of Contents
YOYOJAMES 911S Solar Outdoor Motion Sensor Alarm
Product Information
| Product Name | Solar Infrared Sensor Alarm |
|---|---|
| Model Number | AB CD |
| Product Features |
-
Use for indoor and outdoor all day, with waterproof IP55,
energy saving / environmental protection / safe. -
Suitable for house, orchard, building, farm, warehouse of
security alarm demand, and drive off other animals. -
Full day 24hrs / Night 12Hrs work modes.
-
200 days standby time. Average charge 1 hour can work all
days. -
Wireless remote control for long distance.
-
Solar energy / DC charging, rechargeable lithium battery can be used for a long time.
Product Parameters| Charging efficiency will be affected by sunshine in
different
weather and season. Mounting place should be under direct sunshine for more
than 2 hours.
Product Usage Instructions
- DC Charge:
- Microphone Recording distance affects the playing effect.
- Long press recording/short press switching sounds.
- Long press 3 seconds and hold on, when indicate light up, begins to record, release the button to finish the record.
- Max can record 20 seconds then finish record automatically.
- New recording will cover the last recording automatically.
- Switch:
- Press 1st: 24hrs motion sensor flash & alarm.
- Press 2nd: Motion sensor flash & alarm at night.
- Press 3rd: Power off (Remote control cannot be switched on).
- Wireless Remote Control:
- A key: 24hrs motion sensor flash & alarm.
- B key: Motion sensor flash & alarm at night.
- C key: Switching sounds.
- D key: Host standby (Remote control can be switched on).
- Built-in Sounds: (Dogs bark+Gunshot / Wolf howl / Gong sound / Eagle calls / Firecrackers / Lion roar / Pig killing sound / Explosion sound / Di di sound / Car speaker sound / Alarm sound / Bell / Siren)
- Remote Program (FR wireless frequency 433MHZ):
- Set when you need control several alarms via one remote, or ignore this.
- Each alarm comes with an independent remote. Remote can be programmed to be used independently or on multiple alarms.
- Please ensure no signal interference within 100 meters when resetting remote controlled.
- Long press the power button on the back of the lamp for 5 seconds until LED lighting on.
- Press any key on remote for once (heard Bi, Bi sound — loose the hands). After then, the alarm auto turns off, meaning the program is completed.
- WARNING: Please don’t use incompatible charger or overcharging, otherwise, it will damage the product. Use DC 5V*1A adapter to charge. Charge time may vary.
Package Content
Product Features
- Use for indoor and outdoor all day,with waterproof IP 55, energy saving / environmental protection /safe.
- Suitable for house,orchard,building ,farm,warehouse of security alarm demand, and drive off other animals.
- 5-8 meters motion distance, 360°sensing angle, 129dB high-pitched alarm with flashing light.
- Full day 24hrs/ Night 12Hrs work modes.
- 200 days standby time. average charge 1 hours can work all days.
- Wireless remote control for long distamce.
- Solar energy /DC charging, rechargeable lithium battery can be used for a long time.
Product Parameters
- Solar Panel: 5V 150mA
- LED: 6 pcs red flash LED
- Function: A: 24 hrs motion sensor flash & alarm. B: Motion sensor flash & alarm at night.
- Material: ABS
- Record: Repeatable recording, Max can record 20 seconds, and each induction can be repeated for 2 times
- Charge time: Solar charge>8 hours. DC charge<2 hours. (DC 5V,1A)
- Working time: Motion >100 times
- Sound: Built-in 13 sounds + recording.
- Battery: 3.7V, 1200mAh li-battery
- Motion sensor distance/angle: 5-8M (affected by temperature)
- Remote control distance： Remote control distance is 10 meters – the farthest distance >200 meters (the distance is affected by obstacles and interference signals)
Charging efficiency will be affected by sunshine in different weather and season, mounting place should be under directly sunshine more than 2 hours.
Operation
Wireless remote control
- A key： 24 hrs motion sensor flash & alarm.
- B key： Motion sensor flash & alarm at night.
- C key： switching sounds.
- D key： Host standby (Remote control can be switched on)
Built-in 13 sounds
( Dogs bark+Gunshot / Wolf howl / Gong sound / Eagle calls / Firecrackers / Lion roar / Pig killing sound / Explosion sound / Di di sound / Car speaker sound / Alarm sound / Bell / Siren )
Remote program
( FR wireless frequency ： 433MHZ)
（Set when you need control several alarms via one remote, or ignore this)
- Each alarm comes with independent remote. Remote can be programmed to be used independently or on multiple alarms.
- Please ensure no signal interference within 100meters when resetting remote controlled.
WARNING
- Please don’t use incompatiable charger or over charging, otherwise, it will damage the product.
- Use DC 5V*1A adapter to charge. charge time <2hrs
Installation method
Fence/ wall installation
Pillar mounting installation
Ground insert installation
Attention
- Working temperature should be -10~50℃,If the temperature exceeds this range, the product may not be used normally.
- Low battery power may cause false alarm.
- Any moving object close to human body temperature can make siren.
- Motion detector distance will be affected by surrounding temperature, sunshine intensity , signal interference. (Higher temperature may shorten detect distance, motion detect distance at lower temperature night will be longer than at higher temperature daytime. False alarm may occur if the device under strong directly sunshine.)
- Press the host switch on before using the remote control.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>