sayrelances Bone Conduction Bluetooth Headphone User Manual
- June 14, 2024
- Sayrelances
Table of Contents
sayrelances Bone Conduction Bluetooth Headphone
Headphone introduced
- Indicator light
- Magnetic charging port
- Volume “-” button
- On/off button
- Volume “+” button
- Microphone
Charging
These headphones use a built-in rechargeable battery.
When using the headphones for the first time, it is necessary to fully charge
the battery. During use, if you hear the voice prompt “low battery,” it means
the battery is low and you need to charge the headphones.
Connect the charging cable to the magnetic charging port of the headphones, and it will take about 2 hours to fully charge. The charging status indicator light will be solid red during charging and solid blue when fully charged.
Note: Magnetic charging has positive and negative polarity. When they attract each other, charging can proceed normalt If they repel each other, charging will not work an may even cause a short circuit.
Warning: The rechargeable battery of this product must be handled
properly for recycling.
Do not throw the battery into the fire to prevent an explosion.
Operating Instructions
| Function | Operation | Indicator |
|---|---|---|
| Power on | Long press On/off button (around 3-5 seconds ) | Light on |
| Off | Long press On/off button (around 3-5 seconds ) | Light off |
Music Playback
| Function | Headphone status | Operation |
|---|---|---|
| Increase volume | Playing music | Single-click “+” |
| Reduce volume | Playing music | Single-click “-“ |
| Previous track | Playing music | Long press ” – “for 1s |
| Next track | Playing music | Long press ” + “for 1s |
| Pause | Playing music | Click the on/off button |
| Resume | Pause playback | Click the on/off button |
Answer a call
| Function | Headphone status | Operation |
|---|---|---|
| Answer/ hang up call | Incoming call | Short press the power button to |
answer/hang up
Reject call| Incoming call| Long press the power button for 1 second to reject
volume control| During call| clicks”+”/”-” key
Switch between phone/Bluetooth earpiece| During call| Long press the power
button for 1 second
Operating instruction
How to pair with Bluetooth
Bluetooth pairing: In the powered-off state, long press the power button for 3-5 seconds. The indicator light will enter a red and blue flashing state, indicating that it is in pairing mode. Open the Bluetooth (phone/ computer) on your device, search for the device name “X6,” and click on the device “X6” to pair and connect, Once the connection is successful, you can use it.
Bluetooth / MP3 mode switching: Double-click the power button (multi-function button) to freely switch between Bluetooth and memory mode.
Note The default mode upon powering on is Bluetooth mode.
Song download:
Connect the original charging cable to the computer and the headphones to
access the USB flash drive.
Copy songs from the computer to the USB flash drive.
Friendly remind After powering on, the Bluetooth earphones will automatically search and connect to the most recent device. If the Bluetooth earphones are more than 10 meters (33 feet) away from the device, they will disconnect.
They will only reconnect when placed within a 10-meter range.
If the Bluetooth earphones are disconnected from the device for a long time, you will need to click the multi-function button on the Bluetooth earphones to reconnect.
Al intelligent voice control
(Phone needs to support voice wake-up function)
| Function | headphone status | Operation |
|---|---|---|
| Voice control | Bluetooth is connected | Long press the On/Off Button for 1 |
second
Note In Bluetooth connected state, long press the power button for 1 second to wake up. After hearing the prompt tone, you can use voice control to operate the phone, saving time and being efficient.
Indicator lights
| Charging | Solid red light |
|---|---|
| Charging completed | Solid blue light |
| Pairing mode | Red and blue lights flashing alternately |
| Bluetooth music playback | Blue light flashes slowly for 5 seconds |
Product specifications
Waterproof rating: IPX8 (32GB memory version)
*Charging time:* About 2 hours
BT Version:** 5.3
* Distance: Bluetooth 10 meter
- Current Input: 5V/
- Battery capacity: 230mAh
180mA - Playback: greater than 7 hours@70% volume
- Bluetooth protocols: a2dp1 .3.2\avctp1 .4\avdtp 1.31 avrcp 1.6.2\hfp 1.8 \spp 1.2\rfcomm 1.1\pnp 1.3 \hid 1.1.1 \sdpcore5.3\12cap core 5 .3
- Music format support: WAV,FLAC,WMA,AAC,MP3, APE,M4A
Maintenance and cleaning
-
It is recommended to clean and wipe the earphones after each exercise session to extend the product lifespan.
-
If not used for a long time, please fully charge it at least once a month.
-
Do not disassemble any parts of the product without authorization. If any defects are found, immediately stop using the product and contact the sales for after-sales service.
-
After each exercise, wipe the surface of the headphones clean, especially the charging magnetic suction position.
Handle it in a timely manner to prevent sweat and saltwater from corroding the charging port and affecting the product’s lifespan. -
Keep the product away from fire, heat sources, freezing sources, and chemicals. It is strictly forbidden to violently impact, disassemble, or squeeze the product.
-
Please use a charging adapter with an output of 5V/1A or less .
Product warranty card
This card is a product warranty certificate, please keep it properly.