PROUS GD9215AD24 PTC Heater with Humidification User Manual

PTC Heater with Humidification
User Manual

GD9215AD24 PTC Heater with Humidification

Model: GD9215AD24
  support@prous.ltd

Thanks for Choosing
PROUS!
Your support means the world to us. We hope you enjoy our product as much as we did creating it.

EXTEND YOUR WARRANTY
FOR FREE
We offer 12-month warranty for each of our product.
In addition, we will extend the warranty for another 12 months if you provide us with your order number via e-mail(support@prous.ltd).
support@prous.ltd
www.prous.ltd

IMPORTANT SAFETY INSTRUCTIONS

Always use this product with the following precautions to prevent fire, electric shock, and bodily injury.

|
---|---
① Don’t place near flammable items.| ② Don’t plug in the power cord when hands are wet.
|
③ Don’t touch the air vent with hand.| ④ Don’t use water, wax, glaze or chemical solutions to clean this product.
|
⑤ Don’t place near where children play.| ⑥ Do not use in a humid place such as a shower room.
|
⑦ Don’t below the limit line of the water tank.| ⑧ Don’t exceed the limit line of the water tank.
| This product uses a polarized plug (the two ends of the plug have different thicknesses). To reduce the risk of electric shock, be sure to plug this product into a polarized outlet only.
If the plug does not fit into the outlet, it will not plug into the outlet, twist the plug back and try again. If it still does not fit, consult an electrician. Do not damage the safety functions of this product.
---|---
| Always place this product on stable, level ground.
Remove any obstacles around the product and keep it at least 3 feet (0.9m) away from surrounding walls and flammable objects.
| Do not disassemble this product. Also, do not operate the product with a damaged power cord or plug. Do not use the product after it has been damaged in any way (e.g. dropped).

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

1. Read all instructions before using this heater.

2. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.

3. Always unplug heater when not in use.

4. Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.

5. Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner.

6. Do not use outdoors.

7. This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. Never locate heater where it may fall into a bathtub or other water container.

8. Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.

9. To disconnect heater, turn controls to off, then remove plug from outlet.

10. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.

11. To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked. A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or  flammable liquids are used or stored.

12. Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.

13. Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).

14. If there is a loose fit between the plug and the socket or the plug becomes very hot, the socket may need to be replaced. Check with a qualified electrician to replace the socket.

15. It is normal for the plug and cord to feel warm to the touch. A plug or cord which becomes hot to the touch or becomes distorted in shape may be a result of a worn electrical outlet. Worn outlets or receptacles should be replaced prior to further use of the
    heater. Plugging the heater into a worn outlet / receptacle may result in overheating of the power cord or fire.

16. The output of this heater may vary and its temperature may become hot enough to burn exposed skin. Use of this heater is not recommended for persons with a high sensitivity to heat or an inability to react to avoid burns.

17. Ensure the heater is on a stable, secure surface to eliminate the potential of tipping it over.

18. Make sure that no pieces of polystyrene or other packaging material have been left between elements of the appliance. It may be necessary to pass over the appliance with a vacuum cleaner.

19. Do not attempt to modify or repair the product by yourself. Doing so could void the warranty and cause damage or personal injury. Only a repair technician may disassemble or repair this product.

20. Choking hazard – This remote control unit contains a small battery. Keep the remote control away from children and do not swallow the battery. If the battery is swallowed seek medical advice at once.

21. If the machine is not working as it should, has received a sharp blow, has been dropped, damaged, left outdoors, or dropped into water, do not use and contact Customer Support.

● NOTE: There may be a trace of smoke or odor when the unit is first operated. This indicates that a drop of oil fell on the heating coil during the manufacturing process. It will quickly evaporate and should not re-occur.
● IMPORTANT: This appliance has a polarized plug (one blade is wider than the other).
To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to rig this safety feature.

USING YOUR HEATER

Package Contents
1 PTC Heater With Humidification
1 Remote Control
1 Tansparent Acrylic Panel
1 User Manual
1* Description of Power Plug

Product Diagram

Specifications

Adding Water to the Water Tank

1. Lift the lid of the water tank and pour 250ml of water.
2. Place the lid back and it will operate normally.

*Fill the humidifier with water for approximately 3 hours of continuous usage. Actual usage time may vary from person to person.

Control Pannel

NOTE:
Thermostat adjustment in ECO mode is from 41℉ to 95℉ (increase by 1℉). In other modes, the “Temperature +” and “Temperature -” buttons are not available.

Remote Control

When using the remote control, align the transmitting sensor on the front of the remote control with the receiving sensor on the display screen.

1. The maximum sensing distance of the remote control is about 5 meters, and the detectable angle is approximately 30 degrees to the left and right.
2. Direct sunlight should not directly hit the receiving sensor so as not to affect the reception effect.
3. Before using the remote control, remove the plastic sticker from the button of the remote control.

| Power On/Off
Touch to turn the heater on or off.
Note:
-When the heater is plugged into the electric outlet, the power indicator will light in red.
-Once turned off, a 30-second countdown will show up on the display as the fan will continue to run for 30 seconds to blow out the remaining heat.
---|---
| Humidification
Touch to cycle through  Humidificationr ON/Ambient light ON-Humidification ON/Ambient light /OFF-Humidification OFF/Ambient light OFF.
-The humidifier function will automatically off when the water is run out.
| Oscillation
Touch to turn on or off oscillation.
The angle of oscallation is 70°.
| Auto-Off Timer
-When the heater is on, touch to set a timer(0-12h).
After the timer ends, the heater will turn off automatically.
-To cancel, set the timer to 0 hour.
| Temperature Setting
-In ECO mode, touch to adjust the set temperature.
Note: In ECO mode, the heater will turn off automatically when the set temperature has been reached. If your heater turns off frequently, please raise the set temperature, or switch to Power Heat mode.
Note ：In other modes, the “+” and ” -” buttons are not available.
| Mode Settings
Touch to cycle through ECO-H1(950W)-H2(1500W)-FAN
In ECO mode, the heater will automatically select its optimal heating power, depending on the difference between the set  temperature (41-95℉) and ambient temperature.
Note:
-When the ambient temperature reaches the set temperature, the heater will turn off automatically in 30 seconds.
-When the ambient temperature drops below the set temperature, the heater will operate on medium or high power (950W or 1500W), depending on the difference between the two temperatures.

Display Functions

| 1.Insert the power plug into the power outlet, the display will show.
---|---
| 2. Pressing the Power ON/OFF button starts heating in ECO mode.
| 3. Pressing the mode button to run at low heating level.
| 4. Pressing the mode button again to run at high heating level.
| 5. Pressing the mode button again to run at natrual wind mode.
| 6. Pressing timer to set a automotic shutdown for 1-12 hours.
| 7. Pressing     turns the humidification ON/OFF.

Panel Turn-Off: The LED screen will automatically turn off after 3 minutes of inactivity. It can be turned on again by pressing any button.

Other Function

Tip-over Protection| If the product tilts forward or backward, the built-in automatic power-off function at the base will activate. Hence, it is crucial to use this product on a level surface. If you wish to use the product after a tip-over, simply place it back on a flat surface, press
the power ON/OFF switch, and readjust the settings to your preferences.
---|---
Overheating Protection| When the heating element reaches a certain temperature, the overheat protection function is automatically activated to lower the temperature.
24-Hour Auto-off| When the heater has been in continuous work for 24 hours, the heater automatically shuts off to prevent possible hazards. To restore the heater to working condition, press the power ON/OFF button.

Battery Replacement

1. Press the locking button to pop out the battery holder.
2. Replace with the same battery type with the (+) side facing up.
3. Push in the holder until securely locked into place.

Note:
If the indicator on the remote control doesn’t turn on anymore, please consider replacing the battery.

WARNING
Chemical Burn Hazard. Keep batteries away from children.

• This product contains a lithium button/coin cell battery. If a new or used lithium button/coin cell battery is swallowed or enters the body, it can cause severe internal burns and can lead to death in as little as 2 hours. Always completely secure the battery  compartment If the battery compartment does not close securely, stop using the product, remove the battery; and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical  attention.
• The batteries must be disposed of properly, including keeping them away from children. Even used cells may cause injury.

CLEANING AND MAINTENANCE

We recommend cleaning the heater at least once during the operating season and before the off season. This will ensure optimal performance.

Always disconnect the appliance from the mains by switching it off and removing the plug from the power outlet before cleaning.

• Use only a soft cloth to gently wipe the outer surfaces of the heater clean.
• Do not use any cleaning agents or detergents.
• Never immerse the heater in water and never allow water to drip into the motor housing. Be sure not to wet the heating element and the switches.
• For storage, you may leave the heater covered to protect it from dust. Store it in a cool, dry location and arrange the cable away from traffic areas so that it will not be tripped over or damaged.

**Caution：**

• Do not allow water to run into the interior of the heater as this could result in a fire or electric shock hazard.
• Any other servicing should be performed by an authorized service representative.
• Except cleaning, any other servicing should be performed by an authorized service representative.
• Carefully fold the power supply cord and tie it up with a cord, then put the heater into the packing box. Keep it in a cabinet away from any hot or wet location.

TROUBLE SHOOTING

If your problem is not listed, or the problem still persists, please contact Customer Support at support@prous.ltd.

back on a flat, level and stable surface
Heater does not start| Power cord is not properly plugged in| Connect the plug to a powered electrical outlet
Overheat protection has been activated| Unplug and allow it to cool
Remove any objects on or near the heater
No power is passing through the unit| Ensure that your circuit breaker or fuse is working properly
Ensure that your heater is placed on a flat and even surface
The set temperature is lower than the ambient temperature| Ensure that the temperature is set to be higher than the ambient
temperature
The set temperature is lower than the ambient temperature| The temperature exceeds the threshold of the
thermal cutoff| Turn off and unplug the unit. Allow it to cool and plug into the
electrical outlet again
The heater is tipped over| Place it on a flat, level and stable surface
In ECO mode, the heater will turn off automatically when the set temperature has been reached| This is normal. If your heater turns off frequently, please raise the set temperature, or switch to Power Heat mode

WARRANTY AND SERVICE

Default 12-month warranty
Thanks for choosing PROUS heater. This product is covered with PROUS product and labor warranty for 12 months from the date of its original purchase.
Extend your warranty
Contact us by email (support@prous.ltd) with the correct order number and the warranty will be extended for a further 12 months.

The warranty will not apply in cases of:

• Accident, misuse, or repairs performed by unauthorized personnel.
• Any unit that has been tampered with or used for commercial purposes.
• Normal wear and tear of wearable parts.
• Use of force, damage caused by external influences.
• Damage caused by non-observance of the User Guide, e.g. connection to an unsuitable mains supply or non-compliance with the instructions.
• Partially or completely dismantled appliances.
• Defects caused by or resulting from damages from shipping or from repairs, service, or alteration to the product or any of its parts that have been performed by a repair person not authorized by PROUS.

We can only provide after-sales service for products that are sold by PROUS or PROUS authorized retailers and distributors. If you have purchased your unit from a different place, please contact your seller for return and warranty issues.
support@prous.ltd
Ningbo Hailian Electric Appliance Technology Co., Ltd

• Please have your order confirmation number ready before contacting Customer Support.

PROUS PTC Heater with Humidification
www.prous.ltd

PROUS GD9215AD24
We’re Here to Help!
Contact our customer support!
support@prous.ltd
www.prous.ltd

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>